Talk:SKU Models: Difference between revisions
Line 201: | Line 201: | ||
! rowspan="3" | [[PS2_Compatibility|PS2<BR />Compatibility]] | ! rowspan="3" | [[PS2_Compatibility|PS2<BR />Compatibility]] | ||
! <abbr title="PS2 Emotion Engine + Graphics Synthesizer">[http://en.wikipedia.org/wiki/Emotion_Engine EE+GS]</abbr> | ! <abbr title="PS2 Emotion Engine + Graphics Synthesizer">[http://en.wikipedia.org/wiki/Emotion_Engine EE+GS]</abbr> | ||
| | | colspan="2" | [[CXD2953AGB]] (EE+GS) || colspan="2" | [[CXD2972GB]] (GS only) || colspan="8" {{No}} | ||
|- | |- | ||
! | ! RD RAM | ||
| | | colspan="2" | [[K4R271669F]] or [[K4R271669H]] (2x16 MB) || colspan="10" {{No}} | ||
|- | |- | ||
! | ! [[MultiAV]] bridge | ||
| | | colspan="2" | [[CXD9208GP2]] || colspan="10" {{No}} | ||
|- | |- | ||
! rowspan="2" | Audio/Video | ! rowspan="2" | Audio/Video |
Revision as of 19:28, 16 July 2015
missing file: File:Date Code Superslim.jpg
Max Power ratings
(Corrected the max wattage information of the CECHGxx and CECHHxx models from 280W to 360W. I know this because I myself have a CECHH01 PS3 and the unit states the Current: 3A and Voltage: 120V on the back, therefore: 120V x 3A= 360W.) 67.71.80.71 01:07, 4 February 2015
- Note that 120V-only supplies don't exist. The highest currentrating is for the lowest supported voltage (which is 100V notated on the Power Supply powerrating label):
CECHGxx APS-231 : 100V-240V 3.5-1.5A 50/60Hz (350-360W) -> 79.2-81.4% | 12V 23.5A (282W) 5V 0.6A (3W) | total 285W CECHGxx LSEB1226B1 : 220V-240V 1.7-1.6A 50/60Hz (374-384W) -> 74.2-76.2% | 12V 23.5A (282W) 5V 0.6A (3W) | total 285W CECHGxx LSEB1254A1 : 220V-240V 1.7-1.6A 50/60Hz (374-384W) -> 74.2-76.2% | 12V 23.5A (282W) 5V 0.6A (3W) | total 285W CECHHxx EADP-300AB : 100V-240V 3.6-1.5A 50/60Hz (360-360W) -> 79.2% | 12V 23.5A (282W) 5V 0.6A (3W) | total 285W CECHHxx/CECHKxx APS-239 : 100V-240V 3.5-1.5A 50/60Hz (350-360W) -> 79.2-81.4% | 12V 23.5A (282W) 5V 0.6A (3W) | total 285W
- The SKU Models table has several issues: it oversimplifies information conveyed on other pages and it does not distinguise within SKUs of the variants available (as in the different PSUs used in them). Further it does not distinguise between maxi, peaki, maxo or peako (and if we would, if we would assume the lowest/highest or mean of each of them for the overal range). Euss (talk) 21:04, 3 February 2015 (EST)
SKU Models main page is high bandwidth page, nominated for splitting content, proposal to split in seperate pages as:
|
- SKU Models
- Retail:
- FAT
- Slim (2K)
- Slim 3K
- non Retail:
- Reference Tool (Tool/DECR)
- Debug station (Debug/DEX)
- Arcade
- AV Testing Tool (DECHS)
- Prototypes / Preproduction models
- Comparison of functionality
- Retail:
- Regioning
- Datecode / Manufacturing Date
Other reference: http://www.trisaster.de/page/index.php?topic=78
Seems this SKU has had 2 different motherboard releases:
- CECH-250.A - JTP-001 - serial : 1-882-481-31
- CECH-250.B - JTP-001 - serial : 1-882-481-31
- CECH-250.A - JSD-001 - added by User:MikeM64 - serial: 1-882-770-31
- CECH-250.B - JSD-001 - added by User:MikeM64 - serial: 1-882-770-31
remark: MikeM64 : CECH-2501A with JSD-001 board, came prefactory with 3.40, which is also the lowest downgradeable firmware
Raw Model Data from my JSD-001 (CECH-2501A): 0x00, 0x01, 0x00, 0x84, 0x00, 0x08, 0x00, 0x05
QA doesn't give more downgradeability compared to JIG / Factory/Service Mode
dospiedra i can downgrade with jig to 1.00 max dospiedra on 60 gb retro only , on my fat 80gb only to 2.30 rms in my case 1.97 rms cechg01 eussNL dospiedra: what model whas that FAT 80GB ? CECHE/K/L/M ? dospiedra no idea, was assembled piece by piece and the shell model does not match the plate dospiedra sure is 16mb nor dospiedra and sata drive eussNL that would make it K/L/M dospiedra not 90nm eussNL all 3 are 65nm dospiedra I have no idea of exact model is eussNL K = DIA-002 board, L or M is VER-001 board dospiedra 001 board dospiedra I am not sure eussNL you could run rms' infotool on it, to make sure, but I am not asking you to go for that trouble for me dospiedra rms later try to run it right now I'm busy, but I promise to give the exact model in few hours dospiedra hi , my ps3 model isCECHL04
ofc it doesn't, since there are no drivers for the newer system components in older firmware versions ;)
TESTS... collapsing retail tables
PS3 Model | Name | CECH-20xx | CECH-21xx | CECH-25xx | CECH-30xx | ||
---|---|---|---|---|---|---|---|
Type | 0x09 | 0x0A | 0x0B | 0xC | |||
Production Time | 6 Months | 6 Months | 12 Months | 15 Months | |||
Manufacturing Date Date Code |
July 2009 ~ December 2009 9C, 9D |
January 2010 ~ June 2010 0A, 0B |
July 2010 ~ June 2011 0C, 0D, 1A, 1B |
July 2011 ~ September 2012 1C, 1D, 2A, 2B, 2C | |||
Firmware | Minimal | 2.70 (9C) | 3.20 (0A) | 3.40 (0C), or 3.50 (0D, 1A), or 3.56 (1A, 1B), or 3.60 (1B) | 3.60, 3.72 (1C) | ||
Factory | 2.70 (9C), or 2.76 (9?) | ? | 3.40, 3.41 (0C), or 3.40, 3.50 (0D), or 3.50, 3.56 (1A), or 3.56, 3.60 (1B) | 3.65, 3.72 (1C) | |||
Releases | 3.00, 3.01 (9C), 3.10, 3.15 (9D) | 3.20 (0A), 3.21, 3.30, 3.40 (0B) | 3.40, 3.41, 3.42, 3.50 (0C), 3.55 (0D), 3.56, 3.60 (1A), 3.61, 3.65, 3.66 (1B) | 3.70, 3.72 (1C), 3.73, 4.00 (1D), 4.10, 4.11 (2A), 4.20 (2B), 4.21, 4.25 (2C) | |||
Console Components | |||||||
HDD | 120 GB | Hitachi HTS545012B9SA00 or Toshiba MK1255GSX | 120 GB HDD not available | ||||
250 GB | Toshiba MK2555GSX | 250 GB HDD not available | |||||
160 GB | 160 GB HDD not available | Toshiba MK1665GSX or MK1676GSX | |||||
320 GB | 320 GB HDD not available | Toshiba MK3276GSX | |||||
Bluray Components |
Drive | BD-450 | BD-460 | BD-470 | |||
Chasis | KEM-450AAA | KEM-450DAA | KEM-450EAA | ||||
Laser pickup | KES-450A (SA-CD No) | KES-450D (SA-CD No) | KES-450E (SA-CD No) | ||||
Board | BMD-051 or BMD-061 | BMD-065 | Integrated on Mother Board | ||||
Controller | R8J32820FPV1 or CXD5130R-1 | CXD5131R-1 | Integrated on Mother Board | ||||
Mechacon | BD7969EFV | Integrated on Mother Board | |||||
Power Supply Unit | APS-250 or EADP-220BB (221 watts) | APS-270 or EADP-200DB (197 watts) | APS-306 or EADP-185AB (161 watts) | ||||
HeatSink | Type 5 | Type 6 (Integrated on Mother Board Plate) | |||||
Fan | Nidec G10C12MS1AH-56J14 or Nidec G10C12MS2AH-56J14 or Delta KFB1012HE or NMB-MAT BG1004-B045-P00 (10cm diameter) | Nidec G80E12NS1ZN-56J14 (8cm diameter) | |||||
Switch board | DSW-001 | HSW-001 | KSW-001 | ||||
MotherBoard Components | |||||||
Motherboard Name | DYN-00x | SUR-00x | JTP-00x | JSD-00x | KTE-001 | ||
Syscon | Revs. 1 | SW2-301 | SW3-301 | ||||
Revs. 2 | SW2-302 | ||||||
Revs. 3 | SW2-303 | ||||||
Processing | CELL | CXD2992AGB (45nm) | CXD2992GB (45nm) | CXD2996GB ? (45nm) | |||
XDR RAM | Elpida X5116ADSE-3C-E (4x64MB) | Elpida X1032BASE-3C-F (2x128MB) | Elpida X1032BASE-3CA2-F (2x128MB) | ||||
Graphics | RSX | CXD2991CGB or CXD2991EGB (65nm) | CXD5300AGB (40nm) | CXD5300A1GB (40nm) | CXD5300A1GB or CXD5300DGB (40nm) | CXD5301DGB (40nm) | |
GDDR3 RAM | Qimonda HYB18H512322AF-14 (4x64MB) | ? (4x64MB) | Samsung K4J52324KJ-JC14 (4x64MB) | ? | |||
Audio/Video | MultiAV | CXM4027R | |||||
HDMI | Panasonic MN8647091 (CEC Commands supported) | ||||||
SouthBridge | CXD9963GB (ENCDEC and USB integrated) | ||||||
Bluray Components |
Controller | On Bluray Board | R8J32830FPV1 | CXD5131R-1 | CXD5132R-1 | ||
Mechacon | On Bluray Board | BD7969EFV | BD7979EFV | ||||
GbLAN | Marvell Alaska 88E1118R-NNC2 | Marvell Alaska 88E1310-NNB2 | |||||
Wifi/BT Controller | Marvell Avastar 88W8780 | Marvell Avastar 88W8781 | ? | ||||
Flash | NOR | Spansion S29GL128N90TFIR2 | |||||
Samsung K8Q2815UQB-PI4B (3rd gen) | Samsung K8P2716UZC-QI4D (4th gen) | ||||||
Spansion S29GL128P90TFIR2 | |||||||
Macronix MX29GL128ELT2I-90G | < - - same macronix for all slim models ? - - > | Macronix MX29GL128ELT2I-90G |
Critics and suggestions
- When 1 part gets changed in table, it needs to be changed on all subpages that relate (wrote by euss)
- Yes, thats a problem, but the purpose of this tables is to replace the ones in frontpage... though is a long road to complete all the info, but when completed the table will be "legacy" (and with this i mean is not needed to edit it anymore so his complexity doesnt matters in long term)--Sandungas (talk) 00:32, 28 May 2015 (UTC)
- The table is NOT collapseable (wrote by euss)
- In this photo of a JSD-001 http://www.psdevwiki.com/ps3/images/a/a1/JSD-001-fuses-thermisters.front.jpg it looks like the XDRAM chips are X1032BASE-3CA2-F and X1032BASE-3DA2-F (one of each kind combined together) but searching in google for X1032BASE-3DA2-F doesnt returns any result, also CECH-30xx models are still using the same XDRAM chips than CECH-25xx, so X1032BASE-3DA2-F probably doesnt exists and is just a disturbance on the photo --Sandungas (talk) 00:32, 28 May 2015 (UTC)