Service Connectors: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (Text replacement - "color:black" to "color:black!important")
 
(8 intermediate revisions by 2 users not shown)
Line 90: Line 90:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
|-
|-
| 2 || ?? || SC_RESET/RST || style="background-color:green;color:white" | Syscon || System Reset ||  rowspan="1" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 2 || ?? || SC_RESET/RST || style="background-color:green;color:white" | Syscon || System Reset ||  rowspan="1" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
|-
|-
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || -
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
|-
|-
| 4  || ?? || JRTCK || style="background-color:green;color:white" | Syscon || Return Test Clock ||  rowspan="6" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 4  || ?? || JRTCK || style="background-color:green;color:white" | Syscon || Return Test Clock ||  rowspan="6" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
Line 108: Line 108:
| 9  || ?? || JNTRST || style="background-color:green;color:white" | Syscon || Test Reset   
| 9  || ?? || JNTRST || style="background-color:green;color:white" | Syscon || Test Reset   
|-
|-
| 10 || {{NO}} ||  +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || -
| 10 || {{NO}} ||  +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
|-
|-
|}
|}
Line 132: Line 132:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Standby Voltage !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Standby Voltage !! Group
|-
|-
| - || ?? || +3.3V_EVER? || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
| - || ?? || +3.3V_EVER? || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
|-
|-
| - || ?? || Rx? || style="background-color:green;color:white" | Syscon || Receive UART? || 0 || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| - || ?? || Rx? || style="background-color:green;color:white" | Syscon || Receive UART? || 0 || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
Line 138: Line 138:
| - || ?? || Tx? || style="background-color:green;color:white" | Syscon  || Transfer UART? || 3.14
| - || ?? || Tx? || style="background-color:green;color:white" | Syscon  || Transfer UART? || 3.14
|-
|-
| - || ?? || GND? || style="background-color:black;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
| - || ?? || GND? || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
|-
|-
|}
|}


=== Pictures (Traces from DECR) ===
=== Pictures (Traces from DECR) ===
* JTAG/BAK/DIA/UART TX/UART RX -> http://i.imgur.com/7eGuCpc.jpg
* JTAG/BAK/DIA/UART TX/UART RX -> https://www.psdevwiki.com/ps3/File:7eGuCpc.jpg


==1st Generation==
==1st Generation==
Line 169: Line 169:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || <b>-</b>
| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || <b>-</b>
|-
|-
| 2 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 2 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
Line 185: Line 185:
| 8 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST)
| 8 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST)
|-
|-
| 9 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
| 9 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
|-
|-
| 10 || {{YES}} || RxD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| 10 || {{YES}} || RxD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
Line 191: Line 191:
| 11 || {{YES}} || TxD || style="background-color:green;color:white" | Syscon || Serial Transmit
| 11 || {{YES}} || TxD || style="background-color:green;color:white" | Syscon || Serial Transmit
|-
|-
| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || <b>-</b>
| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || <b>-</b>
|-
|-
| 13 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| 13 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
Line 197: Line 197:
| 14 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode
| 14 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode
|-
|-
| 15 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || rowspan="2" | <b>-</b>
| 15 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || <b>-</b>
|- bgcolor="#dddddd"
|- bgcolor="#dddddd"
| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b>
| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b> || <b>-</b>
|-
|-
| 17 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon or TestMode  <!-- disables Power & Eject buttons --> || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| 17 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
|-
|-
| 18 || {{NO}} || SB_TxD || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
| 18 || {{NO}} || SB_TxD || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
Line 221: Line 221:
| 26 || {{NO}} || SB_CHKSTP_OUT || style="background-color:blue;color:white" | South Bridge || Checkstop Out
| 26 || {{NO}} || SB_CHKSTP_OUT || style="background-color:blue;color:white" | South Bridge || Checkstop Out
|-
|-
| 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:red;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
| 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
|-
|-
| 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:red;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
| 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
|-
|-
| 29 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
| 29 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|-
|-
| 30 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
| 30 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
|-
|-
|}
|}
Line 274: Line 274:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
|-
|-
| 2 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
| 2 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
|-
|-
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
| 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
Line 284: Line 284:
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
| 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
|-
|-
| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="3" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
|-
|-
| 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
| 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
|-
|-
| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon OR TestMode <!-- disables Power & Eject buttons -->
| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
|-
|-
| 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
| 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
Line 300: Line 300:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
|-
|-
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|-
|-
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line
| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line
|-
|-
| 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
| 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
Line 338: Line 338:
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
| 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
|-
|-
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Reset?
| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Hard Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
|-
|-
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
| 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
|-
|-
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset
| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
|-
|-
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
| 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
|-
|-
| 10 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
| 10 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|-
|-
| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red;color:white" | DC-DC Regulator || +1.2V Line
| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator || +1.2V Line
|-
|-
| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|}
|}


Line 387: Line 387:
| [[PQX-00x#PQX-001|PQX-001]] || Plain socket
| [[PQX-00x#PQX-001|PQX-001]] || Plain socket
|-
|-
| [[RTX-00x#RTX-001|RTX-001]] ? || Plain socket
|-
| [[REX-00x#REX-001|REX-001]] ? || Plain socket
|}
|}


Line 396: Line 399:
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
|-
|-
| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
|-
|-
| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
|-
|-
| 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon  || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
| 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon  || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
Line 440: Line 443:


===Bluray Drive Diagnostic Port===
===Bluray Drive Diagnostic Port===
<div style="float:right">[[File:Unknown service connector on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
<div style="float:right">[[File:Bluray Drive Diagnostic Port 28pin on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
For pinout see: [[Bluray_Drive#CN300_45pin|CN300]]
<br style="clear: both;" />
<br style="clear: both;" />
<!-- [[Bluray_Drive#CN300_45pin]] -->


=Links=
=Links=

Latest revision as of 05:05, 1 July 2023

Service Connectors[edit | edit source]

JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.

Notes:

Preproduction Generation[edit | edit source]

Used on Type of Connector
MPU-501 (CEB-2040) CN6504: Headerpins
CN6507: ZIF Connector

CN6504 (SC_JTAG)[edit | edit source]

MPU-501 CN6504 SC_JTAG
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO ? ? ?
2 NO ? ? ?
3 NO ? ? ?
4 NO ? ? ?
5 NO ? ? ?
6 NO ? ? ?
7 NO ? ? ?
8 NO ? ? ?
9 NO ? ? ?
10 NO ? ? ?
11 NO ? ? ?
12 NO ? ? ?
13 NO ? ? ?
14 NO ? ? ?
15 NO ? ? ?
16 NO ? ? ?
17 NO ? ? ?
18 NO ? ? ?
19 NO ? ? ?
20 NO ? ? ?

CN6507 (STATUS)[edit | edit source]

Pin Pogo-Pin Con. Name Connected to Function Group
1 NO ? ? ?
2 NO ? ? ?
3 NO ? ? ?
4 NO ? ? ?
5 NO ? ? ?
6 NO ? ? ?
7 NO ? ? ?
8 NO ? ? ?
9 NO ? ? ?

CN6504 (SC_JTAG) (DECR)[edit | edit source]

TMU-520 CN6504 SC_JTAG
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 ?? SC_RESET/RST Syscon System Reset Syscon JTAG
3 NO +3.3V_EVER DC-DC Regulator +3.3V line -
4 ?? JRTCK Syscon Return Test Clock Syscon JTAG
5 ?? JTCK Syscon Test Clock
6 ?? JTMS Syscon Test Mode Select
7 ?? JTDO Syscon Test Data Out
8 ?? JTDI Syscon Test Data In
9 ?? JNTRST Syscon Test Reset
10 NO +3.3V_EVER DC-DC Regulator +3.3V line -
  • (SC) RESET is connected to S6503 Button

Diag/Backup (DECR)[edit | edit source]

Pin Pogo-Pin Con. Name Connected to Function Group
- ?? Backup Mode? Syscon Backup Mode? Syscon Modes
- ?? Diag Mode? Syscon Diagnose Mode?
  • Backup is Connected to S6502-1 Switch
  • Diag is Connected to S6502-2 Switch

SC_UART (DECR)[edit | edit source]

Pin Pogo-Pin Con. Name Connected to Function Standby Voltage Group
- ?? +3.3V_EVER? DC-DC Regulator +3.3V line? 3.3 -
- ?? Rx? Syscon Receive UART? 0 Syscon UART
- ?? Tx? Syscon Transfer UART? 3.14
- ?? GND? DC-DC Regulator Ground line 0 -

Pictures (Traces from DECR)[edit | edit source]

1st Generation[edit | edit source]

Used on Type of Connector
COOKIE-13 ZIF Connector
COK-001 (Prototype) Plain socket
COK-001 Plain socket
COK-002 Plain socket
COK-002W Plain socket

CN4009[edit | edit source]

First Generation Connector as seen on COK-002
First Generation Connector as seen on COK-001
First Generation Connector as seen on COOKIE-13
Pogo-pins to Testpoints on COK-001
PS3 Service Connector 1st Generation COK-002
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO +5V_EVER DC-DC Regulator +5V line -
2 YES TRST Syscon Test Reset (nTRST) Syscon JTAG
3 YES TDI Syscon Test Data In
4 YES RTCK Syscon Return Test Clock
5 YES TCK Syscon Test Clock
6 YES TDO Syscon Test Data Out
7 YES TMS Syscon Test Mode Select
8 YES SC_RESET Syscon System Reset (nSRST)
9 NO GND DC-DC Regulator Ground line -
10 YES RxD Syscon Serial Receive Syscon UART
11 YES TxD Syscon Serial Transmit
12 NO GND DC-DC Regulator Ground line -
13 YES Diag Mode Syscon Diagnose Mode Syscon Modes
14 YES Backup Mode Syscon Backup Mode
15 NO +3.3V_EVER DC-DC Regulator +3.3V line -
16 YES NC - - -
17 NO RMC Syscon IR Remote Control (input) -
18 NO SB_TxD South Bridge Serial Transmit South Bridge UART
19 NO SB_RxD South Bridge Serial Receive
20 NO SW_4_A (W)LAN Power Switch LAN & WLAN
21 NO BE_TRG_OUT CELL BE Trigger Out Component Tests
22 NO RSX_TRG_OUT RSX Trigger Out
23 NO SB_TRG_OUT South Bridge Trigger Out
24 NO BE_CHKSTP_OUT CELL BE Checkstop Out
25 NO RSX_CHKSTP_OUT RSX Checkstop Out
26 NO SB_CHKSTP_OUT South Bridge Checkstop Out
27 NO +1.2V_MC_VDDIO DC-DC Regulator +1.2V line -
28 NO +1.5V_RSX_VDDIO DC-DC Regulator +1.5V line
29 NO GND DC-DC Regulator Ground line
30 NO +5V_EVER DC-DC Regulator +5V line

It looks like Kayocera 6240

CELL_BE JTAG Testpads[edit | edit source]

CELL BE JTAG Testpads as seen on COK-001 and COK-002
Pin Pogo-Pin Con. Name Connected to Function Group
CL1103 YES TDO pin AW14 @ CELL BE Test Data Out CELL BE JTAG
CL1104 YES TDI pin AW13 @ CELL BE Test Data In
CL1105 YES TCK pin BA13 @ CELL BE Test Clock
CL1106 YES TMS pin AW12 @ CELL BE Test Mode Select
CL1107 YES /TRST pin AV14 @ CELL BE Test Reset (nTRST)


2nd Generation[edit | edit source]

Used on Type of Connector
SEM-001 Plain socket
DIA-001 Plain socket
DIA-002 Plain socket
DEB-001 Plain socket

CN4003[edit | edit source]

Second Generation Connectors as seen on DIA-001
CN4003 at left, CN4004 at right
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 NO +5V_EVER DC-DC Regulator +5V line
3 NO SW_4_B USB Power Switch USB
4 NO SB_SIO0_TXD_M South Bridge Serial Transmit South Bridge UART
5 NO SB_SIO0_RXD_M South Bridge Serial Receive
6 YES Backup Mode Syscon Backup Mode Syscon Modes
7 YES Diag Mode Syscon Diagnose Mode
8 NO RMC Syscon IR Remote Control (input) -
9 YES SC_RXD Syscon Serial Receive Syscon UART
10 YES SC_TXD Syscon Serial Transmit

CN4004[edit | edit source]

Pin Pogo-Pin Con. Name Connected to Function Group
1 NO GND DC-DC Regulator Ground line -
2 NO GND DC-DC Regulator Ground line
3 NO +3.3V_EVER DC-DC Regulator +3.3V line
4 YES SC_RESET Syscon System Reset (nSRST) Syscon JTAG
5 YES TMS Syscon Test Mode Select
6 YES TDO Syscon Test Data Out
7 YES TCK Syscon Test Clock
8 YES RTCK Syscon Return Test Clock
9 YES TDI Syscon Test Data In
10 YES TRST Syscon Test Reset (nTRST)

CN1001 (CELL_BE_JTAG)[edit | edit source]

Second Generation CN1001 Connector as seen on SEM-001
Pin Pogo-Pin Con. Name Connected to Function
1 NO BE_TDI CELL BE Test Data In
2 NO BE_TRST CELL BE Test Reset (nTRST)
3 NO BE_TCK CELL BE Test Clock
4 NO BE_TMS CELL BE Test Mode Select
5 NO BE_TDO CELL BE Test Data Out
6 NO /BE_RESET_AND CELL BE Cell Hard Reset
BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a 0 ohms resistor located in between CELL border and his temperature monitor
7 NO /BE_CHKSTP_OUT CELL BE Cell Checkstop Out
8 NO BE_RESET CELL BE Cell Reset
BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a 0 ohms resistor located in between CELL border and his temperature monitor
9 NO BE_POWGOOD CELL BE Power Good
10 NO GND DC-DC Regulator Ground line
11 NO +1.2V_MC2_VDDIO DC-DC Regulator +1.2V Line
12 NO GND DC-DC Regulator Ground line

3rd Generation[edit | edit source]

Used on Type of Connector
VERTIGO-002 Unknown Connector
VER-001 Plain socket
DYN-001 Plain socket
SURTEES-03 Unknown Connector
SUR-001 Plain socket
JTP-001 Plain socket
JSD-001 Plain socket
KTEN-04 Unknown Connector
KTE-001 Plain socket
MSX-K02 Unknown Connector
MSX-001 Plain socket
MPX-001 Plain socket
NPX-001 Plain socket
PPX-001 Plain socket
PQX-001 Plain socket
RTX-001 ? Plain socket
REX-001 ? Plain socket

CN????[edit | edit source]

This connector was introduced at the same time than the first Sherwood syscon (in VER-001 motherboard with a SW-301 syscon), and it seems to be used in all the next motherboards with syscons from the SW2-30x or SW3-30x series

PS3 Service Connector 3rd gen on VERTIGO
Pin Pogo-Pin Con. Name Connected to Function Group
1 NO +5V_EVER DC-DC Regulator +5V line -
2 NO GND DC-DC Regulator Ground line
3 NO "P73" Syscon (GPIO) Syscon Modes?
4 NO SB_SIO0_TXD_M South Bridge Serial Transmit South Bridge UART (throught 2 missing SMD components at the left of the PCI testpads 75 and 77)
5 NO SB_SIO0_RXD_M South Bridge Serial Receive
6 NO SB_PIO15? South Bridge ? ?
7 NO TOOL0 Syscon Data input/output for tool Syscon JTAG (throught missing SMD components. See: lines 7,8,9 disconnected)
8 NO FLMD0 Syscon Flash programming mode
9 NO RESET Syscon Reset
10 YES SC_TxD Syscon Serial Transmit Syscon UART (throught missing SMD components. See : lines 10,11 disconnected)
11 YES SC_RxD Syscon Serial Receive
12 YES "P65" Syscon (GPIO) Syscon Modes? (throught missing SMD components. See: line 12 disconnected)
13 YES TOOL1 Syscon Clock output for tool Syscon JTAG (throught missing SMD components. See: line 13 disconnected)
14 NO SB_PIO14? South Bridge ? ?
  • Third Generation Service Connector as seen on VER-001

    Third Generation Service Connector as seen on VER-001

  • Third Generation Service Connector as seen on DYN-001

    Third Generation Service Connector as seen on DYN-001

  • Third Generation Service Connector as seen on DYN-001

    Third Generation Service Connector as seen on DYN-001

  • Third Generation Service Connector as seen on SURTEES-03

    Third Generation Service Connector as seen on SURTEES-03

  • Third Generation Service Connector as seen on JSD-001

    Third Generation Service Connector as seen on JSD-001

  • Third Generation Service Connector as seen on MPX-001

    Third Generation Service Connector as seen on MPX-001

CELL_BE_JTAG[edit | edit source]

CELL BE TESTPADS on JSD-001

Same pinout than previous gen ?

Bluray Drive Diagnostic Port[edit | edit source]

Unknown service connector on JSD-001

For pinout see: CN300

Links[edit | edit source]

https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida
https://pastebin.com/hp3Uz6F7 (mirror)
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf

Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Service_Connectors&oldid=72648"