Latest revision as of 05:05, 1 July 2023

Service Connectors[edit | edit source]

JTAG/UART/SPI/Diagnostic I/O used in Sony repair centers if a PS3 couldn't be fixed by software.

Notes:

EBUS and NOR Interface Testpoints are the storage related service points used with pinJIG/pogopin infactory
PCI also has some pads for South Bridge I/O service/diagnostics.

Preproduction Generation[edit | edit source]

Used on	Type of Connector
MPU-501 (CEB-2040)	CN6504: Headerpins CN6507: ZIF Connector

CN6504 (SC_JTAG)[edit | edit source]

MPU-501 CN6504 SC_JTAG

Pin	Pogo-Pin Con.	Name	Connected to	Function
1	NO	?	?	?
2	NO	?	?	?
3	NO	?	?	?
4	NO	?	?	?
5	NO	?	?	?
6	NO	?	?	?
7	NO	?	?	?
8	NO	?	?	?
9	NO	?	?	?
10	NO	?	?	?
11	NO	?	?	?
12	NO	?	?	?
13	NO	?	?	?
14	NO	?	?	?
15	NO	?	?	?
16	NO	?	?	?
17	NO	?	?	?
18	NO	?	?	?
19	NO	?	?	?
20	NO	?	?	?

CN6507 (STATUS)[edit | edit source]

Pin	Pogo-Pin Con.	Name	Connected to	Function
1	NO	?	?	?
2	NO	?	?	?
3	NO	?	?	?
4	NO	?	?	?
5	NO	?	?	?
6	NO	?	?	?
7	NO	?	?	?
8	NO	?	?	?
9	NO	?	?	?

CN6504 (SC_JTAG) (DECR)[edit | edit source]

TMU-520 CN6504 SC_JTAG

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
1	NO	GND	DC-DC Regulator	Ground line	-
2	??	SC_RESET/RST	Syscon	System Reset	Syscon JTAG
3	NO	+3.3V_EVER	DC-DC Regulator	+3.3V line	-
4	??	JRTCK	Syscon	Return Test Clock	Syscon JTAG
5	??	JTCK	Syscon	Test Clock
6	??	JTMS	Syscon	Test Mode Select
7	??	JTDO	Syscon	Test Data Out
8	??	JTDI	Syscon	Test Data In
9	??	JNTRST	Syscon	Test Reset
10	NO	+3.3V_EVER	DC-DC Regulator	+3.3V line	-

(SC) RESET is connected to S6503 Button

Diag/Backup (DECR)[edit | edit source]

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
-	??	Backup Mode?	Syscon	Backup Mode?	Syscon Modes
-	??	Diag Mode?	Syscon	Diagnose Mode?	Syscon Modes

Backup is Connected to S6502-1 Switch
Diag is Connected to S6502-2 Switch

SC_UART (DECR)[edit | edit source]

Pin	Pogo-Pin Con.	Name	Connected to	Function	Standby Voltage	Group
-	??	+3.3V_EVER?	DC-DC Regulator	+3.3V line?	3.3	-
-	??	Rx?	Syscon	Receive UART?	0	Syscon UART
-	??	Tx?	Syscon	Transfer UART?	3.14	Syscon UART
-	??	GND?	DC-DC Regulator	Ground line	0	-

Pictures (Traces from DECR)[edit | edit source]

JTAG/BAK/DIA/UART TX/UART RX -> https://www.psdevwiki.com/ps3/File:7eGuCpc.jpg

1st Generation[edit | edit source]

Used on	Type of Connector
COOKIE-13	ZIF Connector
COK-001 (Prototype)	Plain socket
COK-001	Plain socket
COK-002	Plain socket
COK-002W	Plain socket

CELL_BE JTAG Testpads[edit | edit source]

CELL BE JTAG Testpads as seen on COK-001 and COK-002

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
CL1103	YES	TDO	pin AW14 @ CELL BE	Test Data Out	CELL BE JTAG
CL1104	YES	TDI	pin AW13 @ CELL BE	Test Data In
CL1105	YES	TCK	pin BA13 @ CELL BE	Test Clock
CL1106	YES	TMS	pin AW12 @ CELL BE	Test Mode Select
CL1107	YES	/TRST	pin AV14 @ CELL BE	Test Reset (nTRST)

2nd Generation[edit | edit source]

Used on	Type of Connector
SEM-001	Plain socket
DIA-001	Plain socket
DIA-002	Plain socket
DEB-001	Plain socket

CN4003[edit | edit source]

Second Generation Connectors as seen on DIA-001
CN4003 at left, CN4004 at right

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
1	NO	GND	DC-DC Regulator	Ground line	-
2	NO	+5V_EVER	DC-DC Regulator	+5V line	-
3	NO	SW_4_B	USB	Power Switch	USB
4	NO	SB_SIO0_TXD_M	South Bridge	Serial Transmit	South Bridge UART
5	NO	SB_SIO0_RXD_M	South Bridge	Serial Receive	South Bridge UART
6	YES	Backup Mode	Syscon	Backup Mode	Syscon Modes
7	YES	Diag Mode	Syscon	Diagnose Mode	Syscon Modes
8	NO	RMC	Syscon	IR Remote Control (input)	-
9	YES	SC_RXD	Syscon	Serial Receive	Syscon UART
10	YES	SC_TXD	Syscon	Serial Transmit	Syscon UART

CN4004[edit | edit source]

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
1	NO	GND	DC-DC Regulator	Ground line	-
2	NO	GND	DC-DC Regulator	Ground line
3	NO	+3.3V_EVER	DC-DC Regulator	+3.3V line
4	YES	SC_RESET	Syscon	System Reset (nSRST)	Syscon JTAG
5	YES	TMS	Syscon	Test Mode Select
6	YES	TDO	Syscon	Test Data Out
7	YES	TCK	Syscon	Test Clock
8	YES	RTCK	Syscon	Return Test Clock
9	YES	TDI	Syscon	Test Data In
10	YES	TRST	Syscon	Test Reset (nTRST)

CN1001 (CELL_BE_JTAG)[edit | edit source]

Second Generation CN1001 Connector as seen on SEM-001

Pin	Pogo-Pin Con.	Name	Connected to	Function
1	NO	BE_TDI	CELL BE	Test Data In
2	NO	BE_TRST	CELL BE	Test Reset (nTRST)
3	NO	BE_TCK	CELL BE	Test Clock
4	NO	BE_TMS	CELL BE	Test Mode Select
5	NO	BE_TDO	CELL BE	Test Data Out
6	NO	/BE_RESET_AND	CELL BE	Cell Hard Reset BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a 0 ohms resistor located in between CELL border and his temperature monitor
7	NO	/BE_CHKSTP_OUT	CELL BE	Cell Checkstop Out
8	NO	BE_RESET	CELL BE	Cell Reset BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a 0 ohms resistor located in between CELL border and his temperature monitor
9	NO	BE_POWGOOD	CELL BE	Power Good
10	NO	GND	DC-DC Regulator	Ground line
11	NO	+1.2V_MC2_VDDIO	DC-DC Regulator	+1.2V Line
12	NO	GND	DC-DC Regulator	Ground line

3rd Generation[edit | edit source]

Used on	Type of Connector
VERTIGO-002	Unknown Connector
VER-001	Plain socket
DYN-001	Plain socket
SURTEES-03	Unknown Connector
SUR-001	Plain socket
JTP-001	Plain socket
JSD-001	Plain socket
KTEN-04	Unknown Connector
KTE-001	Plain socket
MSX-K02	Unknown Connector
MSX-001	Plain socket
MPX-001	Plain socket
NPX-001	Plain socket
PPX-001	Plain socket
PQX-001	Plain socket
RTX-001 ?	Plain socket
REX-001 ?	Plain socket

This connector was introduced at the same time than the first Sherwood syscon (in VER-001 motherboard with a SW-301 syscon), and it seems to be used in all the next motherboards with syscons from the SW2-30x or SW3-30x series

PS3 Service Connector 3rd gen on VERTIGO

Pin	Pogo-Pin Con.	Name	Connected to	Function	Group
1	NO	+5V_EVER	DC-DC Regulator	+5V line	-
2	NO	GND	DC-DC Regulator	Ground line	-
3	NO	"P73"	Syscon	(GPIO)	Syscon Modes?
4	NO	SB_SIO0_TXD_M	South Bridge	Serial Transmit	South Bridge UART (throught 2 missing SMD components at the left of the PCI testpads 75 and 77)
5	NO	SB_SIO0_RXD_M	South Bridge	Serial Receive
6	NO	SB_PIO15?	South Bridge	?	?
7	NO	TOOL0	Syscon	Data input/output for tool	Syscon JTAG (throught missing SMD components. See: lines 7,8,9 disconnected)
8	NO	FLMD0	Syscon	Flash programming mode
9	NO	RESET	Syscon	Reset
10	YES	SC_TxD	Syscon	Serial Transmit	Syscon UART (throught missing SMD components. See : lines 10,11 disconnected)
11	YES	SC_RxD	Syscon	Serial Receive
12	YES	"P65"	Syscon	(GPIO)	Syscon Modes? (throught missing SMD components. See: line 12 disconnected)
13	YES	TOOL1	Syscon	Clock output for tool	Syscon JTAG (throught missing SMD components. See: line 13 disconnected)
14	NO	SB_PIO14?	South Bridge	?	?

Third Generation Service Connector as seen on VER-001
Third Generation Service Connector as seen on DYN-001
Third Generation Service Connector as seen on DYN-001
Third Generation Service Connector as seen on SURTEES-03
Third Generation Service Connector as seen on JSD-001
Third Generation Service Connector as seen on MPX-001

CELL_BE_JTAG[edit | edit source]

CELL BE TESTPADS on JSD-001

Same pinout than previous gen ?

Bluray Drive Diagnostic Port[edit | edit source]

Unknown service connector on JSD-001

For pinout see: CN300

Links[edit | edit source]

https://web.archive.org/web/20160309151818/ http://pastie.org/private/h8osu80ksjr0xdta97zida
https://pastebin.com/hp3Uz6F7 (mirror)
http://docs-asia.electrocomponents.com/webdocs/14a3/0900766b814a341b.pdf

@@ Line 90: / Line 90: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 |-
-| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
+| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || rowspan="1" | <b>-</b>
 |-
 | 2 || ?? || SC_RESET/RST || style="background-color:green;color:white" | Syscon || System Reset ||  rowspan="1" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
 |-
-| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || -
+| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
 |-
 | 4  || ?? || JRTCK || style="background-color:green;color:white" | Syscon || Return Test Clock ||  rowspan="6" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
@@ Line 108: / Line 108: @@
 | 9  || ?? || JNTRST || style="background-color:green;color:white" | Syscon || Test Reset
 |-
-| 10 || {{NO}} ||  +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || -
+| 10 || {{NO}} ||  +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || -
 |-
 |}
@@ Line 132: / Line 132: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Standby Voltage !! Group
 |-
-| - || ?? || +3.3V_EVER? || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
+| - || ?? || +3.3V_EVER? || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line? || 3.3 || <b>-</b>
 |-
 | - || ?? || Rx? || style="background-color:green;color:white" | Syscon || Receive UART? || 0 || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
@@ Line 138: / Line 138: @@
 | - || ?? || Tx? || style="background-color:green;color:white" | Syscon  || Transfer UART? || 3.14
 |-
-| - || ?? || GND? || style="background-color:black;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
+| - || ?? || GND? || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line  || 0 || rowspan="1" | <b>-</b>
 |-
 |}
 === Pictures (Traces from DECR) ===
-* JTAG/BAK/DIA/UART TX/UART RX -> http://i.imgur.com/7eGuCpc.jpg
+* JTAG/BAK/DIA/UART TX/UART RX -> https://www.psdevwiki.com/ps3/File:7eGuCpc.jpg
 ==1st Generation==
@@ Line 169: / Line 169: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 |-
-| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || <b>-</b>
+| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || <b>-</b>
 |-
 | 2 || {{YES}} || TRST || style="background-color:green;color:white" | Syscon || Test Reset (nTRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
@@ Line 185: / Line 185: @@
 | 8 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST)
 |-
-| 9 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
+| 9 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line ||<b>-</b>
 |-
 | 10 || {{YES}} || RxD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
@@ Line 191: / Line 191: @@
 | 11 || {{YES}} || TxD || style="background-color:green;color:white" | Syscon || Serial Transmit
 |-
-| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || <b>-</b>
+| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || <b>-</b>
 |-
 | 13 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
@@ Line 197: / Line 197: @@
 | 14 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode
 |-
-| 15 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line || rowspan="2" | <b>-</b>
+| 15 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line || <b>-</b>
 |- bgcolor="#dddddd"
-| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b>
+| 16 ||  {{YES}} || NC || <b>-</b> || <b>-</b> || <b>-</b>
 |-
-| 17 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon or TestMode  <!-- disables Power & Eject buttons --> || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
+| 17 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
 |-
 | 18 || {{NO}} || SB_TxD || style="background-color:blue;color:white" | South Bridge || Serial Transmit || rowspan="2" | <b>[[PCI#South_Bridge_serial|South Bridge UART]]</b>
@@ Line 221: / Line 221: @@
 | 26 || {{NO}} || SB_CHKSTP_OUT || style="background-color:blue;color:white" | South Bridge || Checkstop Out
 |-
-| 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:red;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
+| 27 || {{NO}} || +1.2V_MC_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (Cell-line) --> || +1.2V line || rowspan="4" | <b>-</b>
 |-
-| 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:red;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
+| 28 || {{NO}} || +1.5V_RSX_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator <!-- (RSX-line) --> || +1.5V line
 |-
-| 29 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+| 29 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
 |-
-| 30 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
+| 30 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
 |-
 |}
@@ Line 274: / Line 274: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 |-
-| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
+| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="2" | <b>-</b>
 |-
-| 2 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line
+| 2 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line
 |-
 | 3 || {{NO}} || SW_4_B || style="background-color:yellow" | USB || Power Switch || <b>[[USB]]</b>
@@ Line 284: / Line 284: @@
 | 5 || {{NO}} || SB_SIO0_RXD_M || style="background-color:blue;color:white" | South Bridge || Serial Receive
 |-
-| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="3" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
+| 6 || {{YES}} || Backup Mode || style="background-color:green;color:white" | Syscon || Backup Mode || rowspan="2" | <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>
 |-
 | 7 || {{YES}} || Diag Mode || style="background-color:green;color:white" | Syscon || Diagnose Mode
 |-
-| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || Reset MechaCon OR TestMode <!-- disables Power & Eject buttons -->
+| 8 || {{NO}} || RMC || style="background-color:green;color:white" | Syscon || IR Remote Control (input) || <b>-</b>
 |-
 | 9 || {{YES}} || SC_RXD || style="background-color:green;color:white" | Syscon || Serial Receive || rowspan="2" | <b>[[Syscon_Hardware#Syscon_UART|Syscon UART]]</b>
@@ Line 300: / Line 300: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 |-
-| 1 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
+| 1 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line || rowspan="3" | <b>-</b>
 |-
-| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
 |-
-| 3 || {{NO}} || +3.3V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +3.3V line
+| 3 || {{NO}} || +3.3V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +3.3V line
 |-
 | 4 || {{YES}} || SC_RESET || style="background-color:green;color:white" | Syscon || System Reset (nSRST) || rowspan="7" | <b>[[Syscon_Hardware#Syscon_JTAG|Syscon JTAG]]</b>
@@ Line 338: / Line 338: @@
 | 5 || {{NO}} || BE_TDO || style="background-color:magenta;color:white" | CELL BE || Test Data Out
 |-
-| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Reset?
+| 6 || {{NO}} || /BE_RESET_AND || style="background-color:magenta;color:white" | CELL BE || Cell Hard Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
 |-
 | 7 || {{NO}} || /BE_CHKSTP_OUT || style="background-color:magenta;color:white" | CELL BE || Cell Checkstop Out
 |-
-| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset
+| 8 || {{NO}} || BE_RESET || style="background-color:magenta;color:white" | CELL BE || Cell Reset<br>BE_RESET and BE_RESET_AND (pads 6 and 8 of this connector), are connected to each other with a <abbr title="R1024 in SEM-001">0 ohms resistor</abbr> located in between CELL border and his [[Thermal#Temperature_Monitors|temperature monitor]]
 |-
 | 9 || {{NO}} || BE_POWGOOD || style="background-color:magenta;color:white" | CELL BE || Power Good
 |-
-| 10 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+| 10 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
 |-
-| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red;color:white" | DC-DC Regulator || +1.2V Line
+| 11 || {{NO}} || +1.2V_MC2_VDDIO || style="background-color:red!important;color:white" | DC-DC Regulator || +1.2V Line
 |-
-| 12 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+| 12 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
 |}
@@ Line 387: / Line 387: @@
 | [[PQX-00x#PQX-001|PQX-001]] || Plain socket
 |-
+| [[RTX-00x#RTX-001|RTX-001]] ? || Plain socket
+|-
+| [[REX-00x#REX-001|REX-001]] ? || Plain socket
 |}
@@ Line 396: / Line 399: @@
 ! Pin !! Pogo-Pin Con. !! Name !! Connected to !! Function !! Group
 |-
-| 1 || {{NO}} || +5V_EVER || style="background-color:red;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
+| 1 || {{NO}} || +5V_EVER || style="background-color:red!important;color:white" | DC-DC Regulator || +5V line || rowspan="2" | <b>-</b>
 |-
-| 2 || {{NO}} || GND || style="background-color:black;color:white" | DC-DC Regulator || Ground line
+| 2 || {{NO}} || GND || style="background-color:black!important;color:white" | DC-DC Regulator || Ground line
 |-
 | 3 || {{NO}} || "P73" || style="background-color:green;color:white" | Syscon  || (GPIO) || <b>[[Syscon_Hardware#Syscon_Modes|Syscon Modes]]</b>?<!--Connected to pin 5 of [[Talk:Regulators#D35653_0S25]]... so this pin is directly (or indirectly) related with flash power states-->
@@ Line 440: / Line 443: @@
 ===Bluray Drive Diagnostic Port===
-<div style="float:right">[[File:Bluray Drive Diagnostic Port CN300 45pin on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
+<div style="float:right">[[File:Bluray Drive Diagnostic Port 28pin on JSD-001.jpg|200px|thumb|left|Unknown service connector on [[JSD-001]]]]</div>
-For pinout see: [[Bluray_Drive#CN300_45pin|CN300 45pin]]
+For pinout see: [[Bluray_Drive#CN300_45pin|CN300]]
 <br style="clear: both;" />

Service Connectors: Difference between revisions

Latest revision as of 05:05, 1 July 2023

Contents

Service Connectors[edit | edit source]

Preproduction Generation[edit | edit source]

CN6504 (SC_JTAG)[edit | edit source]

CN6507 (STATUS)[edit | edit source]

CN6504 (SC_JTAG) (DECR)[edit | edit source]

Diag/Backup (DECR)[edit | edit source]

SC_UART (DECR)[edit | edit source]

Pictures (Traces from DECR)[edit | edit source]

1st Generation[edit | edit source]

CN4009[edit | edit source]

CELL_BE JTAG Testpads[edit | edit source]

2nd Generation[edit | edit source]

CN4003[edit | edit source]

CN4004[edit | edit source]

CN1001 (CELL_BE_JTAG)[edit | edit source]

3rd Generation[edit | edit source]

CN????[edit | edit source]

CELL_BE_JTAG[edit | edit source]

Bluray Drive Diagnostic Port[edit | edit source]

Links[edit | edit source]

Navigation menu

Service Connectors: Difference between revisions

Latest revision as of 05:05, 1 July 2023

Service Connectors[edit | edit source]

Preproduction Generation[edit | edit source]

CN6504 (SC_JTAG)[edit | edit source]

CN6507 (STATUS)[edit | edit source]

CN6504 (SC_JTAG) (DECR)[edit | edit source]

Diag/Backup (DECR)[edit | edit source]

SC_UART (DECR)[edit | edit source]

Pictures (Traces from DECR)[edit | edit source]

1st Generation[edit | edit source]

CN4009[edit | edit source]

CELL_BE JTAG Testpads[edit | edit source]

2nd Generation[edit | edit source]

CN4003[edit | edit source]

CN4004[edit | edit source]

CN1001 (CELL_BE_JTAG)[edit | edit source]

3rd Generation[edit | edit source]

CN????[edit | edit source]

CELL_BE_JTAG[edit | edit source]

Bluray Drive Diagnostic Port[edit | edit source]

Links[edit | edit source]

Navigation menu

Search