SW2-303: Difference between revisions
Jump to navigation
Jump to search
m (→Pinout: this note was verifyed wrong... what happened is the info posted for pins 12 and 13 was "displaced" (mistake at counting pins)... but did belong to pins 11 and 12 instead) |
(→Pinout) |
||
(20 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
== SW2-303 (SysCon) == | == SW2-303 (SysCon) == | ||
<div style="float:right">[[File:Syscon SW2-303.jpg|thumb|Photo of a Syscon 'SW2-303' (QFP Packaging)]]<br /><br />[[File:Fp128b_pin_arrangement.png|thumb|QFP Package : 128 pins<br />''pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))'']] <br /> <br />[[File:Syscon SW2-303 Unsoldered.JPG|thumb]]</div> | |||
*Used on: | |||
**PS3 Slim [[CECH-25xx]] with motherboard: [[JSD-001]] or [[JTP-001]] | |||
**PS3 Slim [[CECH-30xx]] with motherboard: [[KTE-001]] | |||
*True Name: uPD78F11BB | |||
=== Pinout === | === Pinout === | ||
Line 8: | Line 12: | ||
! Pin # !! Name !! Port !! Description !! STBY Voltages | ! Pin # !! Name !! Port !! Description !! STBY Voltages | ||
|- | |- | ||
| 1 || || || Connected to pin27 @Panasonic [[MN8647091]] || 0 | | 1 || P142/SCK20/SCL20 || || Connected to pin27 @Panasonic [[MN8647091]] || 0 | ||
|- | |- | ||
| 2 || | | 2 || SB_INT || || SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0 | ||
|- | |- | ||
| 3 || | | 3 || BE_INT || || BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15 | ||
|- | |- | ||
| 4 || || || To +12V_MAIN through the resistor and divider || 0 | | 4 || || || To +12V_MAIN through the resistor and divider || 0 | ||
|- | |- | ||
| 5 || P37/POW_LED || || Connected to dual led(Green) on | | 5 || P37/POW_LED || || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0 | ||
|- | |- | ||
| 6 || P36/STBY_LED || || Connected to dual led(Red) on | | 6 || P36/STBY_LED || || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V) | ||
|- | |- | ||
| 7 || || || || 0 | | 7 || || || Connected to pinAA18@SB || 0 | ||
|- | |- | ||
| 8 || || || || 0 | | 8 || || || Connected to pinAA17@SB || 0 | ||
|- | |- | ||
| 9 || || || || 0 | | 9 || || || CELL BE related? || 0 | ||
|- | |- | ||
| 10 || || || || 0 | | 10 || || || || 0 | ||
|- | |- | ||
| 11 || P106 || || Connected to Backlit LEDs | | 11 || P106 || || Connected to Backlit LEDs on [[switch boards | switch board]] || 0 | ||
|- | |- | ||
| 12 || P105 || || Connected to CONTOUR LEDs | | 12 || P105 || || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0 | ||
|- | |- | ||
| 13 || P104 || || || 0 | | 13 || P104 || || Absent element between this line and GND. Nothing else. || 0 | ||
|- | |- | ||
| 14 || || || || 0 | | 14 || || || || 0 | ||
|- | |- | ||
| 15 || || || || 0 | | 15 || INTP?? || || || 0 | ||
|- | |- | ||
| 16 || BUZZER || || || 0 | | 16 || BUZZER || || || 0 | ||
|- | |- | ||
| 17 || || || || 0 | | 17 || P45/SO01 || || || 0 | ||
|- | |- | ||
| 18 || P44 || || 3v @ standby || 3.0 | | 18 || P44/SI01 || || 3v @ standby || 3.0 | ||
|- | |- | ||
| 19 || || || || 0 | | 19 || P43/SCK01 || || || 0 | ||
|- | |- | ||
| 20 || || || || 0 | | 20 || || || || 0 | ||
|- | |- | ||
| 21 || | | 21 || TOOL1 || || 3v @ standby || 3.0 | ||
|- | |- | ||
| 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0 | | 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0 | ||
|- | |- | ||
| 23 || || || || 0 | | 23 || P127/SO21 || || || 0 | ||
|- | |- | ||
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) || 3v @ standby (3.15) | | 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15) | ||
|- | |- | ||
| 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) || 3v @ standby (3.15) | | 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15) | ||
|- | |- | ||
| 26 || RESET? || || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 || | | 26 || RESET? || || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 || | ||
|- | |- | ||
| 27 || P124 || || CLK -> 1-2V Amplitude (32.768Khz?) || | | 27 || P124 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) || | ||
|- | |- | ||
| 28 || P123 || || CLK -> 1-2V Amplitude (32.768Khz?) || | | 28 || P123 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) || | ||
|- | |- | ||
| 29 || P137/FLMD0 || || 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor) || 3.33 | | 29 || P137/FLMD0 || || 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor) || 3.33 | ||
|- | |- | ||
| 30 || P122 || || 0.8v @ standby | | 30 || P122 || || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1) | ||
|- | |- | ||
| 31 || P121 || || 2.2v @ standby | | 31 || P121 || || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4) | ||
|- | |- | ||
| 32 || REGC || || || | | 32 || REGC || || || | ||
Line 98: | Line 102: | ||
| 45 || || || || 0 | | 45 || || || || 0 | ||
|- | |- | ||
| 46 || || || || 0 | | 46 || INTP?? || || || 0 | ||
|- | |- | ||
| 47 || P76 || || 3v @ standby (3.15) || 3.15 | | 47 || P76 || || 3v @ standby (3.15) || 3.15 | ||
Line 104: | Line 108: | ||
| 48 || P75 || || 3v @ standby (3.15) || 3.15 | | 48 || P75 || || 3v @ standby (3.15) || 3.15 | ||
|- | |- | ||
| 49 || || || || 0 | | 49 || INTP?? || || || 0 | ||
|- | |- | ||
| 50 || P73 || || Connected to voltage regulator [[Talk:Regulators | D35653 0S25]], pin 5 (And connected to pin 3 @ Service Connector) || 0 | | 50 || P73 || || Connected to voltage regulator [[Talk:Regulators | D35653 0S25]], pin 5 (And connected to pin 3 @ Service Connector) || 0 | ||
Line 138: | Line 142: | ||
| 65 || || || || 0 | | 65 || || || || 0 | ||
|- | |- | ||
| 66 || || || || 0 | | 66 || INTP?? || || || 0 | ||
|- | |- | ||
| 67 || || || || 0 | | 67 || || || || 0 | ||
Line 166: | Line 170: | ||
| 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3 | | 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3 | ||
|- | |- | ||
| 80 || || || || 0 | | 80 || P12/EX26/SO00/TxD0 || || SO from Cell Slave to Syscon Master || 0 | ||
|- | |- | ||
| 81 || P11 || || | | 81 || P11 P11/EX25/SI00/RxD0 || || SI from Syscon Master to Cell Slave || 1.2 | ||
|- | |- | ||
| 82 || || || || 0 | | 82 || P10/EX24/SCK00 || || Serial Clock || 0 | ||
|- | |- | ||
| 83 || P90 || || | | 83 || P90 || || Chip Select || 2.0 | ||
|- | |- | ||
| 84 || P91 || || 3v @ standby || 3.0 | | 84 || P91 || || 3v @ standby || 3.0 | ||
Line 182: | Line 186: | ||
| 87 || || || || 0 | | 87 || || || || 0 | ||
|- | |- | ||
| 88 || || || || 0 | | 88 || P95/SCK11/SCL11 || || || 0 | ||
|- | |- | ||
| 89 || || || || 0 | | 89 || /SI11/SDA11 || || || 0 | ||
|- | |- | ||
| 90 || || || || 0 | | 90 || P97/SO11 || || || 0 | ||
|- | |- | ||
| 91 || || || || 0 | | 91 || || || || 0 | ||
Line 226: | Line 230: | ||
| 109 || P150 || || 3v @ standby || 3.0 | | 109 || P150 || || 3v @ standby || 3.0 | ||
|- | |- | ||
| 110 || P27/ | | 110 || P27/POW_SW_DET || || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3 | ||
|- | |- | ||
| 111 || P26/ | | 111 || P26/EJECT_SW_DET || || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3 | ||
|- | |- | ||
| 112 || || || || 0 | | 112 || || || || 0 | ||
Line 248: | Line 252: | ||
| 120 || || || || 0 | | 120 || || || || 0 | ||
|- | |- | ||
| 121 || || || || 0 | | 121 || P04/SCK10/SCL10 || || || 0 | ||
|- | |- | ||
| 122 || || || || 0 | | 122 || SI10/RxD1/SDA10 || || || 0 | ||
|- | |- | ||
| 123 || || || || 0 | | 123 || P02/SO10/TxD1 || || || 0 | ||
|- | |- | ||
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0 | | 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0 | ||
Line 260: | Line 264: | ||
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0 | | 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0 | ||
|- | |- | ||
| 127 || || || || 0 | | 127 || P144/SO20/TxD2 || || || 0 | ||
|- | |- | ||
| 128 || || || Connected to pin29 @Panasonic [[MN8647091]] || 0 | | 128 || /SI20/RxD2/SDA20 || || Connected to pin29 @Panasonic [[MN8647091]] || 0 | ||
|} | |} | ||
{{Wikify}} | {{Wikify}} |
Revision as of 14:39, 3 February 2020
SW2-303 (SysCon)
- Used on:
- True Name: uPD78F11BB
Pinout
Pin # | Name | Port | Description | STBY Voltages |
---|---|---|---|---|
1 | P142/SCK20/SCL20 | Connected to pin27 @Panasonic MN8647091 | 0 | |
2 | SB_INT | SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) | 0 | |
3 | BE_INT | BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) | 3.15 | |
4 | To +12V_MAIN through the resistor and divider | 0 | ||
5 | P37/POW_LED | Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) | 0 | |
6 | P36/STBY_LED | Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) | 3v @ standby (3.3V) | |
7 | Connected to pinAA18@SB | 0 | ||
8 | Connected to pinAA17@SB | 0 | ||
9 | CELL BE related? | 0 | ||
10 | 0 | |||
11 | P106 | Connected to Backlit LEDs on switch board | 0 | |
12 | P105 | Connected to CONTOUR LEDs on switch board | 0 | |
13 | P104 | Absent element between this line and GND. Nothing else. | 0 | |
14 | 0 | |||
15 | INTP?? | 0 | ||
16 | BUZZER | 0 | ||
17 | P45/SO01 | 0 | ||
18 | P44/SI01 | 3v @ standby | 3.0 | |
19 | P43/SCK01 | 0 | ||
20 | 0 | |||
21 | TOOL1 | 3v @ standby | 3.0 | |
22 | TOOL0/Debugger Pin? | (Connected to Pin 7 @ Service Connector) (0V?) | 0 | |
23 | P127/SO21 | 0 | ||
24 | P126/THR_I2C_SDA | Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) | 3v @ standby (3.15) | |
25 | P125/THR_I2C_SCL | Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) | 3v @ standby (3.15) | |
26 | RESET? | Connected to standby voltage regulator 463A, pin 3 | ||
27 | P124 | Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) | ||
28 | P123 | Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) | ||
29 | P137/FLMD0 | 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor) | 3.33 | |
30 | P122 | Connected to a small external oscilator 2 ? | 0.8v @ standby (1.1) | |
31 | P121 | Connected to a small external oscilator 2 ? | 2.2v @ standby (2.4) | |
32 | REGC | |||
33 | GROUND/Vss0 | 0 | ||
34 | GROUND/EVss0 | 0 | ||
35 | Vdd | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
36 | EVdd0 | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
37 | P60 | 0.2v @ standby | 0 | |
38 | P61 | 0.2v @ standby | 0 | |
39 | 0 | |||
40 | 0 | |||
41 | P31/AC IN? | 3v @ standby (3.3) | 3.3 | |
42 | Connected (indirectly) to voltage regulator BD9684 0906, pin 4 | 0 | ||
43 | P65 | 3v @ standby | 3.0 | |
44 | 0 | |||
45 | 0 | |||
46 | INTP?? | 0 | ||
47 | P76 | 3v @ standby (3.15) | 3.15 | |
48 | P75 | 3v @ standby (3.15) | 3.15 | |
49 | INTP?? | 0 | ||
50 | P73 | Connected to voltage regulator D35653 0S25, pin 5 (And connected to pin 3 @ Service Connector) | 0 | |
51 | 0 | |||
52 | Connected to voltage regulator BD3525, pin 12 | 0 | ||
53 | 0 | |||
54 | 0 | |||
55 | 0 | |||
56 | GROUND/EVss1 | 0 | ||
57 | EVdd1 | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
58 | 0 | |||
59 | 0 | |||
60 | 0 | |||
61 | 0 | |||
62 | 0 | |||
63 | 0 | |||
64 | 0 | |||
65 | 0 | |||
66 | INTP?? | 0 | ||
67 | 0 | |||
68 | 0 | |||
69 | 0 | |||
70 | 0 | |||
71 | 0 | |||
72 | 0 | |||
73 | 0 | |||
74 | 0 | |||
75 | Connected to voltage regulator Mitsumi 040 810X, pin 5 | 0 | ||
76 | P16 | 3v @ standby (3.15) | 3.15 | |
77 | P15 | 3v @ standby (3.3) | 3.3 | |
78 | SC_RxD(RxD3/RxD2/P14) | 0 | ||
79 | SC_TxD(TxD3/TxD2/P13) | 3v @ standby (3.3) | 3.3 | |
80 | P12/EX26/SO00/TxD0 | SO from Cell Slave to Syscon Master | 0 | |
81 | P11 P11/EX25/SI00/RxD0 | SI from Syscon Master to Cell Slave | 1.2 | |
82 | P10/EX24/SCK00 | Serial Clock | 0 | |
83 | P90 | Chip Select | 2.0 | |
84 | P91 | 3v @ standby | 3.0 | |
85 | 0 | |||
86 | 0 | |||
87 | 0 | |||
88 | P95/SCK11/SCL11 | 0 | ||
89 | /SI11/SDA11 | 0 | ||
90 | P97/SO11 | 0 | ||
91 | 0 | |||
92 | Connected to voltage regulator BD3527 (near FLASH), pin 12 | 0 | ||
93 | 0 | |||
94 | 0 | |||
95 | Connected to voltage regulator BD3527 (near USB), pin 12 | 0 | ||
96 | 0 | |||
97 | P101 | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
98 | 0 | |||
99 | 0 | |||
100 | P146 | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
101 | GROUND | 0 | ||
102 | 0 | |||
103 | 0 | |||
104 | 0 | |||
105 | 0 | |||
106 | 0 | |||
107 | 0 | |||
108 | 0 | |||
109 | P150 | 3v @ standby | 3.0 | |
110 | P27/POW_SW_DET | Power switch detect. Connected to switch board | 3v @ standby (3.3) 3.3 | |
111 | P26/EJECT_SW_DET | Eject switch detect. Connected to switch board | 3v @ standby (3.3) 3.3 | |
112 | 0 | |||
113 | 0 | |||
114 | 0 | |||
115 | 0 | |||
116 | 0 | |||
117 | P20 | (0V?) | 0 | |
118 | P130/ACDC_STBY | 0 | ||
119 | P102 | Connected to standby voltage regulator 348A, pins 2 and 7 | ||
120 | 0 | |||
121 | P04/SCK10/SCL10 | 0 | ||
122 | SI10/RxD1/SDA10 | 0 | ||
123 | P02/SO10/TxD1 | 0 | ||
124 | Connected to pin93 @Panasonic MN8647091 | 0 | ||
125 | 0 | |||
126 | P145/FAN_PWM | PWM Control for the Fan. | 0 | |
127 | P144/SO20/TxD2 | 0 | ||
128 | /SI20/RxD2/SDA20 | Connected to pin29 @Panasonic MN8647091 | 0 |
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
|