Cooling
Relative: see also Cooling,Thermal
Cooling per SKU
Heatsink overview
- In PS3 2000 series heatsinks (20xx, 21xx, 25xx) there is no reference of the manufacturer neither the model, there is only 2 "serial numbers", one is for the "metal cooling block" and the other for the "plastic heatsink cover", both seems to be too random to be used to identify the different versions, the serial number of the plastic cover sometimes is missing, and the only reference is the plastic material used to "mold" it, the 2 plastics used are shorted to "BAYER" and "SABIC", but the exact reference of this plastics can be seen inside the power supply case (that seems to be the same materials) as follows:
- BAYER BAYBLEND KU2-1514>PC+ABS-FR(40)<
- SABIC CYCOLOY CH6410>PC+SAN-FR(40)<
type 1
as seen on: CECHAxx, CECHBxx, CECHCxx, CECHExx
HSF - CECHA - pic1
HSF - CECHA - pic2
HSF - CECHA - pic3
HSF - CECHA - pic4
HSF - CECHA - pic5
type 2
type 3
CECHHxx (?+ CECHJxx, CECHKxx?)
type 4
CECHLxx, CECHMxx, CECHPxx, CECHQxx
type 5
First 3 generations of PS3 slim : CECH-20xx, CECH-21xx, CECH-25xx
In this models, the airflow passes inside the power supply, so can be considered part of the "air tunnel"
The surface closer to the center of the fan is the CELL... and the other is RSX... the air passes first trought CELL metal elements (cooler) and then passes trought RSX elements (hotter), the copper pipes are for CELL surface and are connected to a "secondary" cooling metal block placed laterally inside the air tunnel
revision 1
- Notes (identification)
- Is the only "type 5" heatsink with horizontal plates, and vertical "columns". The horizontal plates allows the airflow to spread in radial directions from the fan center, and consequently to enter in the power supply in angles
- The vertical "columns" doesnt seems to be copper pipes and are soldered/drilled in the RSX metal block, this manufacturing process left some marks that are visibles in the bottom view
CECH-20xx heatsink rev1 - bottom view
CECH-20xx heatsink rev1 - back view
CECH-20xx heatsink rev1 - front view
.jpg)
.jpg)
.jpg)
revision 2
- Notes (identification)
- CELL surface has no drill/holes marks, and one corner is "out" of the plate, the secondary cooling metal block (after the copper pipe) has 12 vertical plates
- RSX has 2 drills/holes at the sides
CECH-20xx heatsink rev2 - bottom view
CECH-20xx heatsink rev2 - top view
CECH-20xx heatsink rev2 - back view
.jpg)
.jpg)
.jpg)
revision 3
- Notes (identification)
- CELL surface has 12 drills/holes that are partially visibles in the bottom and top views
- Doesnt seems to have a copper pipe in the bottom view. but some copper is partially visible in the top view so is supposed it has a copper pipe over the plate (that is flanked by 2 paralell lines visibles in the bottom view)
CECH-20xx heatsink rev3 - bottom view
CECH-20xx heatsink rev3 - back view
.jpg)
.jpg)
revision 4
- Notes (identification)
- CELL surface has 4 holes/drills
- RSX surface has 5 holes/drills
CECH-21xx heatsink - bottom view
CECH-21xx heatsink - back view
.jpg)
.jpg)
revision 5
- Notes (identification)
- CELL copper pipe is soldered and glued and gets out of CELL surface vertically, and is connected to a secondary CELL cooling block with 11 plates placed in a side, both are visibles from a bottom view (the 2 lines in paralell to the copper pipe in the bottom view are the base of the secondary CELL cooling metal block)
- CELL primary cooling block is glued to CELL surface
- RSX cooling block has 16 verticall plates, and is drilled/soldered by 4 points to the bottom plate of the heatsink that is cropped. This block is mobile thanks to this areas cropped and the drilled holes (can be moved up or down some milimeters)
- The 2 surfaces are made of alluminium but with a different alloy (CELL is harder to polish and darker)
CECH-25x heatsink - bottom view
CECH-25x heatsink - back view
.jpg)
.jpg)
type 6
as seen on: CECH-30xx
CECH-30xx heatsink - front view
CECH-30xx heatsink - back view
CECH-30xx metal cooling block - front view
CECH-30xx metal cooling block - back view
.jpg)
.jpg)
.jpg)
.jpg)
type 7
CECH-40xx heatsink - top overview
CECH-40xx heatsink - top view
CECH-40xx heatsink - bottom view
CECH-40xx heatsink - bottom view
CECH-40xx heatsink - back view
CECH-40xx metal cooling block - back view
.jpg)
.jpg)
.jpg)
.jpg)
Fan overview
14cm diameter
Delta Electronics KFB1412H
Delta Electronics KFB1412H Diameter: 14cm Blades: 17 Cablelength: 9cm Voltage: 12V Current: 2.0A
Nidec D14F12BS1-01H1
Nidec D14F12BS1-01H1 Diameter: 14cm Blades: 15 Cablelength: 12cm Voltage: 12V Current: 2.65A
Nidec G14T12BS1AF-56J14
Nidec G14T12BS1AF-56J14 Diameter: 14cm Blades: 15 Cablelength: 18cm Voltage: 12V Current: 1.75A
Nidec G14T12BS2AF-56J14
Nidec G14T12BS2AF-56J14 Diameter: 14cm Blades: 15 Cablelength: 9cm Voltage: 12V Current: 1.75A
NMB-MAT BG1402-B045-P00 (15 blade)
NMB-MAT BG1402-B045-P00 (15 blade) Diameter: 14cm Blades: 15 Cablelength: 18cm Voltage: 12V Current: 2.20A
NMB-MAT BG1402-B045-P00 (19 blade)
NMB-MAT BG1402-B045-P00 (19 blade) Diameter: 14cm Blades: 15 Cablelength: 15cm Voltage: 12V Current: 2.90A
10cm diameter
Delta KFB1012HE
Delta KFB1012HE Diameter: 10cm Blades: 17 Cablelength: Voltage: 12V Current: 1.30A
Nidec G10C12MS1AH-56J14
Nidec G10C12MS1AH-56J14 Diameter: 10cm Blades: 17 Cablelength: Voltage: 12V Current: 1.38A
Nidec G10C12MS2AH-56J14
Nidec G10C12MS2AH-56J14 Diameter: 10cm Blades: 17 Cablelength: 17cm Voltage: 12V Current: 1.67A
Sanitation
PS3 Dust Gathering - if this much is outside the console, the same amount or more will be inside too if the console was used somewhile
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
