USB: Difference between revisions
Jump to navigation
Jump to search
m (moved to GL852 page) |
m (Dark Mode) |
||
| Line 25: | Line 25: | ||
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power / +5 volt DC (max.500mA) | | 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power / +5 volt DC (max.500mA) | ||
|- | |- | ||
| 2 || style="color:black; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair | | 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair | ||
|- | |- | ||
| 3 || style="color:white; background-color:#33CC33;" | Green || D+ | | 3 || style="color:white; background-color:#33CC33;" | Green || D+ | ||
| Line 42: | Line 42: | ||
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power | | 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power | ||
|- | |- | ||
| 2 || style="color:black; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair | | 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair | ||
|- | |- | ||
| 3 || style="color:white; background-color:#33CC33;" | Green || D+ | | 3 || style="color:white; background-color:#33CC33;" | Green || D+ | ||
Revision as of 03:37, 1 July 2023
USB 2.0
Depending on the SKU Models the PS3 is equiped with 6x (Tool/DECR), 4 or 2 USB (Universal Serial Bus) 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.
Note: On PS3 Slim CECH-20xx/DYN-001 and later, the USB port datalines are directly connected to South Bridge without a USB-Hub chip (port is initialised via DC switch IC connected to South Bridge and TH3301 thermistor protect 5V input).
For more detailed info about the USB hub pinout see: GL852
USB lines top view (common traces for all slim models)
USB lines bottom view (common traces for all slim models)
JSD-001/JTP-001 USB connector TH3301 thermistor and DC switch IC to South Bridge
.jpg)
.jpg)
Generic USB Pinout
| Pin | Color | Signal | Description |
|---|---|---|---|
| Shell | N / A | Shield | Metal housing |
| 1 | Red | VBUS | Power / +5 volt DC (max.500mA) |
| 2 | White | D- | USB 2.0 differential pair |
| 3 | Green | D+ | |
| 4 | Black | GND | Ground |
| Pin | Color | Signal | Description |
|---|---|---|---|
| Shell | N / A | Shield | Metal housing |
| 1 | Red | VBUS | Power |
| 2 | White | D- | USB 2.0 differential pair |
| 3 | Green | D+ | |
| 4 | N / A | ID | Permits detection of which end of a cable is plugged in: • "A" connector (host): connected to the signal ground • "B" connector (device): not connected |
| 5 | Black | GND | Ground |
Note: used on many Peripherals for charging/sync
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
