Latest revision as of 05:27, 4 August 2024

BD Drive[edit | edit source]

Interface speed is max. 11MB/s based on the supported read speeds

Supported Disc Formats[edit | edit source]

BD[edit | edit source]

Blu-ray Disc read maximum is at 2× speed (72 Mbit/s) throughout the entire disc (CLV), region coded type allowing the use of:

PlayStation 3 BD-ROM (DVD region matched; i.e., Zone 1, Zone 2, etc., and All)
BD-ROM (BD region matched; i.e., Area A, Area B, etc., and All)
BD-R
BD-RE (not compatible with BD-RE version 1.0)

DVD[edit | edit source]

DVD disc read maximum is at 8× speed (86.40 Mbit/s) at the outermost part of the disc (CAV), region region coded type allowing the use of:

PlayStation 2 DVD-ROM[33] (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C)
DVD-ROM
DVD-Video (DVD region matched; i.e., Region 1, Region 2, etc., and All)
DVD-Audio (DVD-Video content only)
DVD+R
DVD+RW
DVD-R
DVD-RW
AVCHD
DSD Disc
DVD side of DualDisc
Super Audio CD (compatibility removed in 40 GB, the second 80 GB model (CECHF), and the 160 GB model)

CD[edit | edit source]

Compact Disc disc read maximum is at 24× speed (29.49 Mbit/s) at the outermost part of the disc (CAV), region coded type allowing the use of:

PlayStation 2 CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U/C, PAL or NTSC-C, compatibility removed in 40 GB model, the second 80 GB model (CECHF), and the 160 GB model)
PlayStation CD-ROM (PlayStation region matched; i.e., NTSC-J, NTSC-U or PAL)
CD-ROM
CD-R
CD-RW
CD-DA
Photo CD?
Picture CD?
MP3 CD (MP3, WMA, ATRAC)

Bluray Drive Revisions[edit | edit source]

This table shows all parts mounted from factory on the different PS3 models, and also the compatible replacement parts that was not mounted from factory because was released later but works. When several replacement parts are compatible you should try to aim for the newest one because it superceedes the others (probably at the time the new part started being produced the production of the older part was stopped)

Retail PS3 Models
	PS3 Model	MB	I/O	Drive	Slide	Laser	Lens	DB	Controller	EMBOOT
1	CECHAxx	COK-001	PATA 60p	BD-400	KEM-400AAA	KES-400A	1	BMD-001	CXD5063AGG-1	302R....?
2	CECHBxx	COK-001
3	CECHCxx	COK-002
4	CECHExx	COK-002
5	CECHGxx	SEM-001
6	CECHGxx	SEM-001						BMD-002	CXD5065GB-1	302R....?
7	CECHHxx	DIA-001	PATA 60p	BD-410	KEM-410ACA	KES-410A	2	BMD-003	CXD5065GB-1	302R....?
8	CECHJxx	DIA-002						BMD-006	CXD5065GB-1	302R....?
9	CECHKxx							BMD-006	CXD5065GB-1	302R....?
10	CECHKxx							BMD-011	R8J32800FPV	304R....?
11	CECHLxx CECHMxx CECHPxx CECHQxx	VER-001	SATA 24p					BMD-021	CXD5065GB-1	302R....?
12	CECHLxx CECHMxx CECHPxx CECHQxx	VER-001	SATA 24p					BMD-031	R8J32810FPV1	304R....?

13	CECH-20xx	DYN-001	SATA 24p	BD-450	KEM-450AAA	KES-450A or KES-460A	2	BMD-051	R8J32820FPV1	308R....?
14	CECH-20xx	DYN-001						BMD-061	CXD5130R-1	306R0008
15	CECH-21xx	SUR-001						BMD-065	CXD5131R-1	306R0010
16	CECH-25xx	JTP-00x	SATA	BD-460	KEM-450DAA	KES-450D or KES-460A		Integrated	R8J32830FPV1	308R....?
17	CECH-25xx	JSD-00x		BD-460	KEM-450DAA	KES-450D or KES-460A			CXD5131R-1	306R0011
18	CECH-30xx	KTE-001		BD-470	KEM-450EAA	KES-450E or KES-470A			CXD5132R-1	310R0003

19	CECH-40xx	MSX-001	SATA	Integrated	KEM-850	KES-850A	2	Integrated	CXD5132R-1	314R0001
20	CECH-40xx	MPX-001			KEM-850	KES-850A			R8J32840FP1	312R....?
21	CECH-42xx	NPX-001			KEM-850	KES-850A			R8J32840FP1	312R....?
22		PPX-001			KEM-451AAA	KES-451A			?	........?
23		PQX-001			KEM-850	KES-850A			?	........?
24	CECH-43xx	RTX-001			KEM-451AAA	KES-451A	1		R8J32840FP1	316R....?
25	CECH-43xx	REX-001			KEM-495AAA	KES-495A	1		R9J04G011FP1	318R....?

Non Retail PS3 Models
PS3 Model	MB	Drive	Slide	Laser	Lens	DB	I/O	Controller	EMBOOT	Notes
DECR-1000	TMU-520	BD-400	KEM-400AAA	KES-400A	1	BMD-001	PATA 60p	CXD5063GG-3
DECR-1400	DEB-001	BD-410

Notes
- In lasers models with 2 lenses, one is for CD/DVD, another for Blu-ray
- Need proper sources, drive info and which PS3 SKU's are having X drive. Please fill in the needed info if possible.
- The BD controllers starting with CXD are manufactured by sony and the others with R are manufactured by renesas. Starting from CECHKxx every motherboard has 2 revisions of the BD drive, the first uses a sony BD controller and the second a renesas BD controller. This means for some reason (like reducing costs?) sony passes the BD controller production to renesas when they are happy with the new BD controllers

Table explained in short[edit | edit source]

CECHA, CECHB, CECHC, (some CECHE, CECHG)[edit | edit source]

Initial FAT models: With BD-400 drive, BMD-001 daughterboard capable for driving KEM-400AAA slide and KES-400A laser.

CECHE[edit | edit source]

Some have a KES-410ACA dual lens laser with BMD-003 daughterboard.

CECHG[edit | edit source]

First seen on CECHGxx: Still BD-400 drive, but now with BMD-002 or BMD-003 daughterboard

CECHH, CECHI, CECHJ, CECHK, CECHL, CECHM, CECHN, CECHO, CECHP, CECHQ[edit | edit source]

Since CECHHxx and later: Changed to BD-410 drive, with BMD-003/BMD-006/BMD-011/BMD-021/BMD-031 daughterboard and KES-410A dual lens laser

CECH2000[edit | edit source]

CECH-20xx slims introduced BD-450 with BMD-051 daughterboard, capable of driving KES-450A laser and KEM-450AAA slide

CECH2100[edit | edit source]

CECH-21xx slims also uses BD-450 with BMD-051 daughterboard, capable of driving KES-450A laser and KEM-450AAA slide (but sometimes seen with KES-460A laser)

CECH2500, CECH3000 without daughterboard[edit | edit source]

CECH-25xx (and later CECH-30xx) series moved the components from the daughterboard to the main PS3 motherboard. Thus there are more/different flatcables used to connect the drive. They are electrical inter-changable (2500<>3000), but mounting differs slightly. It can be modified to fit by cutting some plastic pins on the bottom front of the drive (to make it fit properly with the start/eject board).

KES-460A Laser will work with all slims before the CECH-30xx series.

KES-470A Laser is not backwards compatible and only with CECH-30xx series

CECH4000 toploader[edit | edit source]

CECH-40xx introduced the toploader (like ps2 slim and old ps1 had) with KEM-850 PHA 0672 assembly.

unreferenced[edit | edit source]

Remarry BluRay drive[edit | edit source]

BluRay drive daughterboard is paired with PS3 motherboard, so exchanging a BluRay drive requires remarriage of the BluRay daughterboard. See: Remarry Bluray Drive

BluRay region switcher[edit | edit source]

This makes changing the BluRay region switching possible. The method described below is using 3 region specific bytes (0x84, 0x85, 0x8C) to change the modelinfo.

Other modelinfo byte values: 0x81 Reference Tool, 0x82 Debug, 0x83 Japan (00), 0x84 North America (01), 0x85 Europe, Middle East, Africa (04), 0x86 South Korea (05), 0x87 United Kingom, Ireland (03), 0x88 Mexico (11), 0x89 Australia, New Zealand (02), 0x8A Singapore, Malaysia (06), 0x8B Taiwan (07), 0x8C Russia, India (08), 0x8D China (09), 0x8E Hong Kong (12)

Payloader method prerequisites:

LV2 Patcher v9
patchfiles (see below)

patch4.txt content (3.55 offsets):

# BD Region A (NTSC) [North America]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force US - Retail
F3A8: 3BC00084 # li        %r30, 0×84 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

patch5.txt content(3.55 offsets):

# BD Region B (PAL) [Europe, Middle East, Africa]
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to Europe... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Europe - Retail
F3A8: 3BC00085 # li        %r30, 0×85 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

patch6.txt content(3.55 offsets):

# BD Region C (RUSSIA/INDIA)
# Patches marked with (*1) seem to be unstable. Thanks to drizztbsd and
# RandomUse.
# PL3:
ef48: payload.bin # this is not neccesary, 
# just the first QWORD of the payload
# Change region to US... Thanks ps3mrenigma
# Syscall preamble
F380: F821FF51 # stdu    %sp, -0xB0(%sp)
F384: 7C0802A6 # mflr    %r0
F388: FBC100A0 # std     %r30, 0xA0(%sp)
F38C: FBE100A8 # std     %r31, 0xA8(%sp)
F390: FBA10098 # std     %r29, 0×98(%sp)
F394: F80100C0 # std     %r0,  0xC0(%sp)
# capture 0x19004 if not jump to original syscall 
F398: 3FE00001 # lis        %r31, 1
F39C: 63FF9004 # ori        %r31, %r31, 0×9004
F3A0: 7C1F1800 # cmpw    %r31, %r3
F3A4: 4082003C # bne _orig_syscall
# Force Russia - Retail
F3A8: 3BC0008C # li        %r30, 0×8C 
F3AC: 3BA00001 # li        %r29, 1
F3B0: 9BA40001 # stb        %r29, 1(%r4)
F3B4: 9BC40003 # stb        %r30, 3(%r4)
F3B8: 9BA40005 # stb        %r29, 5(%r4)
F3BC: 9BA40007 # stb        %r29, 7(%r4)
F3C0: 38600000 # li        %r3, 0
# Restore STACK
F3C4: E80100C0 # ld        %r0, 0xC0(%sp)
F3C8: EBA10098 # ld        %r29, 0×98(%sp) 
F3CC: EBE100A8 # ld        %r31, 0xA8(%sp)
F3D0: EBC100A0 # ld        %r30, 0xA0(%sp)
F3D4: 7C0803A6 # mtlr    %r0
F3D8: 382100B0 # addi    %sp, %sp, 0xB0
F3DC: 4E800020 # blr
F3E0: 4823ED28 # b syscall0x363
31EB1C: 0000F380 #syscall 0x363 descriptor

Copy the patch files to /dev_hdd0/game/LV2000000/USRDIR and use LV2 Patcher to select the patch to use. Reboot to return to original state.

Reference: ps3mrenigma blog export

BD Drive IC Components[edit | edit source]

The drive controller contains a BGA-sized 2MB NOR flash memory chip for Blu-ray drive firmware code, with the contents encrypted. In addition to this, there is a 8MB SDRAM working memory chip. Each drive contains a unique identification number, possibly stored in the SPI Serial Interface Macronix EEPROM. This chip or the NOR flash chip probably stores the device key (and associated sequence keys), and the host private key. The Blu-ray drive is controlled by a Sony Digital Signal Processor chip (CXD6350GG-1, CXD5063AGG-1, CXD5065GB-1, CXD5065-1 depending the SKU) and a Sony CXA2720R Front End Processor chip. Motors/coils are driven by Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver) and Rohm BD7956FS (Motor Driver - EXP-Motor coils/sled/slot motor driver), of which the Laser Driver uses an OPAMP NJM13403V for Tracking/Focus CTRL.

Type	Size	Speed	Voltage	Packaging	Manufacturer	Serial Number	Description
NOR Flash	2MB		3V		Spansion	S99-50111-001	PS3 Blu-ray firmware chip
NOR Flash	1MB		3V	BGA-48/BGA-64	Spansion	S29AL008D / AL008D0043-01	PS3 Blu-ray firmware chip (CECHJ and later models)
SDRAM	8MB (64M-bit 4Mx16)	133MHz	3.3V	TSOPII-54	Samsung	K4S641632K-UC75	PS3 Blu-ray working memory chip
SDRAM	8MB (64M-bit 4Mx16)	143MHz	3.3V	TSOPII-54	ESMT	M12L64164A-7TG	PS3 Blu-ray working memory chip (CECHJ and later models)
EEPROM	128KB	85MHz			Macronix	MX25L1005MC-12G	PS3 Blu-ray flash chip

In regard to Renesas SCEI R8J328xxFPV see also: http://weaponre.com/blog.html

Controllers (Digital Signal Processors)[edit | edit source]

Also known as MC or MechaCon.

CXD5063GG-1[edit | edit source]

IC300
Used in BMD-001, BMD-002

CXD5063AGG-1[edit | edit source]

IC300
Used in BMD-001, BMD-002

CXD5065GB-1[edit | edit source]

IC300
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:CXD5065GB-1-GRID-bw-pcbview.png
Other Reference: http://stefde69.blogspot.com/2010/04/blue-ray-board-made-accessible.html

CXD5130R-1[edit | edit source]

Used in BMD-061

CXD5131R-1[edit | edit source]

Used as controller/bridge for the Bluray Drive:
- On Bluray Drive board BMD-065, used in PS3 models CECH-21xx with motherboard SUR-001
- Integrated on motherboard in PS3 models CECH-25xx with motherboard JSD-001 (not in JTP-001)

See: CXD5131R-1

CXD5132R-1[edit | edit source]

Integrated on PS3 motherboards: KTE-00x (in CECH-30xx PS3 models), and MSX-00x (in CECH-40xx PS3 models)

See: CXD5132R-1

Renesas SCEI R8J32800FPV[edit | edit source]

Used in BMD-011

Renesas SCEI R8J32810FPV1[edit | edit source]

Used in BMD-031

Renesas SCEI R8J32820FPV1[edit | edit source]

Used in BMD-051
running @ 33.969MHz

Renesas R8J32820FPV1

Renesas SCEI R8J32830FPV1[edit | edit source]

Integrated on PS3 motherboard: JTP-00x (in CECH-25xx PS3 models)

Renesas R8J32830FPV1 (integrated on JTP-001 motherboard)

Subcontrollers (Front-End-Processors)[edit | edit source]

CXA2720R[edit | edit source]

IC110
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021

Drivers[edit | edit source]

Rohm BA5888FP (Laser Driver - Tracking/Focus Coils driver)[edit | edit source]

Simular Datasheet: BA5954FP.pdf
IC108
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011, BMD-021

Rohm BD7956FS (7 channel Motor Driver - EXP-Motor coils/sled/slot motor driver)[edit | edit source]

Datasheet: bd7956fs.pdf
IC103
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011, BMD-021

Rohm BD7969EFV (9 channel Motor/Coil Driver - EXP-Motor coils/sled/slot/focus motor driver)[edit | edit source]

Datasheet: bd7959efv-e.pdf
bd7959efv
Used in BMD-061

Integrated on motherboard in CECH-25xx with motherboard JTP-001

Rohm BD7979EFV[edit | edit source]

Integrated on motherboard in CECH-25xx with motherboard JSD-001, and CECH-30xx with motherboard KTE-001

See BD7979EFV

Rohm BD7761EFV (motor driver)[edit | edit source]

Integrated on PS3 motherboard: MSX-001, MPX-001, PQX-001. See: BD7761EFV

Rohm BD7763EFV (motor driver)[edit | edit source]

Integrated on PS3 motherboard: PPX-00x and REX-001 (probably used also in RTX-001). See: BD7763EFV

NJM13403V (OPAMP - Tracking/Focus CTRL)[edit | edit source]

Datasheet: NJM13403V.pdf (153.98 KB)
IC303
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:NJM13403V-SSOP14.png

Memory[edit | edit source]

NOR Flash[edit | edit source]

Spansion S99-50111-001[edit | edit source]

IC304
Contains encrypted firmware
Used in BMD-001

Spansion S99-50111-001
Spansion S99-50111-001 pinout

Manufacturer ID: 0x01
Device ID: 0x49
Capacity: 16Mbit

Spansion AL008D0043-01[edit | edit source]

IC304
Contains encrypted firmware
Used in BMD-002, BMD-003, BMD-004, BMD-006, BMD-021

Manufacturer ID: 0x01
Device ID: 0x5B (bottom boot block)
Capacity: 8Mbit

Other Reference:

Spansion S29AL008D[edit | edit source]

Datasheet: S29AL008D_00_A11_e.pdf
IC304
Contains encrypted firmware
File:S29AL008D-BGA-48.png
Used in BMD-006

RAM[edit | edit source]

Samsung K4S641632K-UC75[edit | edit source]

Datasheet: K4S641632K.pdf (327.77 KB)
IC309
Worker RAM for BD
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-021
File:Samsung_K4S641632K-UC75-TSOPII-54.png

ESMT M12L64164A-7TG[edit | edit source]

Datasheet: M12L64164A.pdf
IC309
Worker RAM for BD
Used in BMD-003, BMD-006
File:ESMT-M12L64164A-7TG-TSOPII54.png

EEPROM[edit | edit source]

Macronix MX25L1005MC[edit | edit source]

Datasheet: Serial1.pdf
IC310
Key
Used in BMD-001, BMD-002, BMD-003, BMD-006
File:Macronix-MX25L1005MC-SOP8.png

Serial[edit | edit source]

Macronix MX25L1635DM2I-12G[edit | edit source]

16M-BIT x1/x2/x4 CMOS Serial Flash
Datasheet: [1]
Used in BMD-061

Others[edit | edit source]

CXD5064R[edit | edit source]

IC504
Used in BMD-001

Marvell 88SA8040-TBC1[edit | edit source]

Used in BMD-011, BMD-021

SATA to PATA IDE bridge chip. See: 88SA8040-TBC1

BD Drive Connectors[edit | edit source]

CN301 - Bluraydrive Main I/O Connector[edit | edit source]

60-pin DB Connector
bluray drive

60 pins
To mainboard, Data
Used in BMD-001, BMD-002, BMD-003, BMD-006, BMD-011

Pin	Usage	Remarks
1	EVER3.3V
2	GND	Ground
3	12_SW	12CM Disk Switch
4	8_SW	8CM Disk Switch
5	HOST_EJECT
6	HOST_DISCIN
7	DISC_CHUCK
8	PHOTO_LED
9	DISCIN_SW
10	GND	Ground
11	SCK
12	SCS
13	SIN
14	SOUT
15	XSIOINT
16	RESERVED	TXD
17	RESERVED	RD
18	XSB_CBLID
19	GND	Ground
20	DAT
21	LRCK
22	BCK
23	GND	Ground
24	HINT
25	HA1
26	XPDIAG
27	HA0
28	HA2
29	XHCS0
30	XHCS1
31	XDASP
32	GND	Ground
33	DREQ
34	GND	Ground
35	XIOW
36	GND	Ground
37	XIOR
38	GND	Ground
39	XIOCHRDY
40	CSEL
41	XDACK
42	GND	Ground
43	HDB7
44	HDB8
45	HDB6
46	HDB9
47	HDB5
48	HDB10
49	HDB4
50	HDB11
51	HDB3
52	HDB12
53	HDB2
54	HDB13
55	HDB1
56	HDB14
57	HDB0
58	HDB15
59	GND	Ground
60	XRESET

CN100 14pin[edit | edit source]

Pin	Usage	Remarks
1	5V	+5V DC
2	SCKSNS3	S clock Sense
3	Slide Cam SW
4	12cm SW	to S100: 12cm Detection Switch
5	8cm SW	to S101: 8cm Detection Switch
6	DISC CHUCK	to S102: Chucking Switch
7	DISC IN SW
8	EVER 3.3V	+3.3V DC
9	GND	Ground
10	NC	No connection
11	LOAD+	to 12
12	LOAD+	to CN101-2pin:2
13	LOAD-	to 14
14	LOAD-	to CN101-2pin:1

CN101 2pin[edit | edit source]

Pin	Usage	Remarks
1	LOAD-	to CN100-14pin:13+14
2	LOAD+	to CN100-14pin:11+12

CN104 2pin[edit | edit source]

To IR-LED for detect disc insertion
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1
2

CN200 2pin[edit | edit source]

Pin	Usage	Remarks
1	PHOTO LED	to JL200
2	GND	Ground ; to JL201

CN103 45pin[edit | edit source]

To laser, Data and Focus/Tracking
Used in BMD-001, BMD-002, BMD-003, BMD-006

Pin	Usage	Remarks
1	IOP_MON
2	TEST_V
3	EMST
4	LDEN
5	XRST
6	SDIO
7	SEN_LDD
8	SCLK
9	THERMO
10	8.0V	8.0V DC
11	5.0V	5V DC
12	GND_LD	Ground
13	GND_LD	Ground
14	3.3V	3.3V DC
15	GND	Ground
16	GND	Ground
17	XOUT
18	H
19	G
20	F
21	E
22	VC_PD
23	D
24	C
25	B
26	A
27	5V_PD	VCC 5V DC
28	GND_PD	Ground
29	DVD_AF-
30	DVD_AF+
31	GND_PD	Ground
32	BD_AF-
33	BD_AF+
34	GND_PD	Ground
35	VPP_LCD
36	SEN_LCD
37	EXP_B-
38	EXP_B+
39	EXP_A-
40	EXP_A+
41	EXP_INIT
42	TRK_in
43	FCS_far
44	FCS_near
45	TRK_out

CN102 8pin[edit | edit source]

To spindle motor
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	SLDA3
2	SLDA3
3	SLDA1
4	SLDA1
5	SLDB1
6	SLDB1
7	SLDB3
8	SLDB3

CN101 14pin[edit | edit source]

To position tracking mechanics
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	5V	+5V DC
2	SCKSNS3	S clock Sense
3	SW4	Slide Cam SW
4	SW3	12cm SW
5	SW2	8cm SW
6	DISC CHUCK
7	DISC IN SW
8	EVER 3.3V	+3.3V DC
9	GND	Ground
10	NC	No connection
11	LOAD+	to 12
12	LOAD+
13	LOAD-	to 14
14	LOAD-

CN101 8pin[edit | edit source]

To position tracking mechanics
Used in BMD-003, BMD-006

Pin	Usage	Remarks
1
2
3
4
5
6
7
8

CN100 19pin[edit | edit source]

To disc motor
Used in BMD-001, BMD-002

Pin	Usage	Remarks
1	HB+
2	HB-
3	HW-
4	HW+
5	HV-
6	HV+
7	HU-
8	HU+
9	U
10	U
11	V
12	V
13	W
14	W
15	FGND	Ground
16	SIGGND	Ground
17	INSW
18	SCK5V
19	SCKSNS

CN100 18pin[edit | edit source]

To disc motor
Used in BMD-003, BMD-006

Pin	Usage	Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

CN300 45pin[edit | edit source]

JTAG (check service manual)
Used in BMD-001, BMD-002, BMD-003

Pin	Usage	Remarks
1	3.3V
2	3.3V
3	5V
4	5V
5	RESERVED
6	RESERVED
7	RESERVED
8	TRACESYNC
9	PIPESTAT0
10	PIPESTAT1
11	PIPESTAT2
12	TRACECLK
13	TRACEPKT15
14	TRACEPKT14
15	TRACEPKT11
16	TRACEPKT13
17	TRACEPKT10
18	TRACEPKT6
19	TRACEPKT9
20	TRACEPKT3
21	TRACEPKT8
22	TRACEPKT1
23	TRACEPKT5
24	TRACEPKT12
25	TRACEPKT2
26	TRACEPKT7
27	TRACEPKT0
28	TRACEPKT4
29	TINT
30	TMS
31	TDO
32	JTSEL
33	TCK
34	NTRST
35	RTCK
36	TDI
37	NSRST
38	RXD
39	TXD
40	DBDRQ
41	DBGACK
42	GND	Ground
43	GND	Ground
44	GND	Ground
45	GND	Ground

CN502 4pin[edit | edit source]

To mainboard, Power
Used in BMD-001, BMD-002, BMD-003, BMD-006

Pin	Usage	Remarks
1	12V
2	GND	Ground
3	GND	Ground
4	5V

@@ Line 73: / Line 73: @@
 |-
 | {{cellcolors|#A2A9B1|#A2A9B1}} 12 || [[BMD-031]] || [[R8J32810FPV1]] || 304R....? ||
+|-{{cellcolors|#A2A9B1}}
+| colspan="12" |
 |-
 | {{cellcolors|#A2A9B1|#A2A9B1}} 13 || rowspan="2" | [[CECH-20xx]] || rowspan="2" | [[DYN-001]] || rowspan="3" | SATA 24p || rowspan="3" | [[BD-450]] || rowspan="3" | [[KEM-450AAA]] || rowspan="3" | [[KES-450A]] or<br />[[KES-460A]] || rowspan="6" | 2 || [[BMD-051]] || [[R8J32820FPV1]] || 308R....? ||
@@ Line 85: / Line 87: @@
 |-
 | {{cellcolors|#A2A9B1|#A2A9B1}} 18 || [[CECH-30xx]] || [[KTE-001]] || [[BD-470]] || [[KEM-450EAA]] || [[KES-450E]] or<br />[[KES-470A]] || [[CXD5132R-1]] || 310R0003 ||
+|-{{cellcolors|#A2A9B1}}
+| colspan="12" |
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 19 || rowspan="3" | [[CECH-40xx]] || [[MSX-001]] || rowspan="8" | SATA || rowspan="6" | [[BD-850]] || rowspan="6" | [[KEM-850]] || rowspan="6" | [[KES-850A]] || rowspan="8" | 2 || rowspan="8" {{integrated}} || [[CXD5132R-1]] || 314R0001 ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 19 || rowspan="2" | [[CECH-40xx]] || [[MSX-001]] || rowspan="7" | SATA || rowspan="7" {{integrated}} || rowspan="2" | [[KEM-850]] || rowspan="2" | [[KES-850A]] || rowspan="5" | 2 || rowspan="7" {{integrated}} || [[CXD5132R-1]] || 314R0001 ||
 |-
 | {{cellcolors|#A2A9B1|#A2A9B1}} 20 || [[MPX-001]] || [[R8J32840FP1]] || 312R....? ||
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 21 || [[NPX-001]] || [[R8J32840FP1]] || 312R....? ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 21 || rowspan="3" | [[CECH-42xx]] || [[NPX-001]] ||[[KEM-850]]||[[KES-850A]]|| [[R8J32840FP1]] || 312R....? ||
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 22 || rowspan="4" | [[CECH-42xx]] || [[MSX-001]] || [[CXD5132R-1]] ||  ........? ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 22 || [[PPX-001]] ||[[KEM-451AAA]]||[[KES-451A]]|| ? || ........? ||
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 23 || [[MPX-001]] || [[R8J32840FP1]] || 316R....? ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 23 || [[PQX-001]] ||[[KEM-850]]||[[KES-850A]]|| ? || ........? ||
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 24 || [[NPX-001]] || [[R8J32840FP1]] || 316R....? ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 24 || rowspan="2" | [[CECH-43xx]] || [[RTX-001]] || [[KEM-451AAA]] || [[KES-451A]] || 1 || [[R8J32840FP1]] || 316R....? ||
 |-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 25 || [[PQX-001]] || {{unkn|[[BD-850]]}} || {{unkn|[[KEM-850]]}} || {{unkn|[[KES-850A]]}} || [[R8J32840FP1]] || 316R....? ||
+| {{cellcolors|#A2A9B1|#A2A9B1}} 25 || [[REX-00x|REX-001]] || [[KEM-495AAA]] || [[KES-495A]] || 1 || [[R9J04G011FP1]] || 318R....? ||
-|-
-| {{cellcolors|#A2A9B1|#A2A9B1}} 26 || [[CECH-43xx]] || [[RTX-001]] || ? || ? || ? || ? || ........? ||
 |}
@@ Line 108: / Line 110: @@
 |+ Non Retail PS3 Models
 ! [[SKU Models | PS3 Model]] !! <abbr title="MotherBoard">[[Motherboard Revisions|MB]]</abbr> !! [[Bluray Drive|Drive]] !! <abbr title="Mounting Drivesled">Slide</abbr> !! <abbr title="Laser Assembly">Laser</abbr> !! <abbr title="Lenses">Lens</abbr> !! <abbr title="DaughterBoard">DB</abbr> !! I/O !! Controller !! [[Talk:Bluray_Drive_Firmware#Speculation|EMBOOT]] !! Notes
-|-{{cellcolors|lightgrey}}
+|-
 | [[DECR-1000]] || [[TMU-520]] || [[BD-400]] || [[KEM-400AAA]] || [[KES-400A]] || 1 || [[BMD-001]] || PATA 60p || [[CXD5063GG-3]] ||  ||
-|-{{cellcolors|lightgrey}}
+|-
-| [[DECHAxx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
 | [[DECR-1400]] || [[DEB-001]] || [[BD-410]] ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECHJxx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-20xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-S20xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-21xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-S21xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-25xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-S25xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-30xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-S30xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-40xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-S40xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-42xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
-|-{{cellcolors|lightgrey}}
-| [[DECH-43xx]] ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
 |}
@@ Line 153: / Line 127: @@
 === CECHE ===
-Some have a KES-410ACA dual lens laser.
+Some have a KES-410ACA dual lens laser with [[BMD-003]] daughterboard.
 === CECHG ===
@@ Line 180: / Line 154: @@
 *[[KES-450E]]
 *[[KEM-480AAA]] unknown PS3 model
-*[[KEM-495AAA]] *[[CECH-4301C]]
+*[[KEM-495AAA]] [[CECH-43xx|CECH-4301C]]
 == Remarry BluRay drive ==
@@ Line 434: / Line 408: @@
 ====Rohm BD7761EFV (motor driver)====
-Integrated on PS3 motherboard: [[MSX-00x]] (in [[CECH-40xx]] PS3 models). See: [[BD7761EFV]]
+Integrated on PS3 motherboard: [[MSX-001]], [[MPX-001]], [[PQX-001]]. See: [[BD7761EFV]]
-<!--// not verifyed if present in [[MSX-00x]], [[NPX-00x]] PS3 motherboards //-->
+<!--// not verifyed if present in [[NPX-00x]] PS3 motherboards //-->
+====Rohm BD7763EFV (motor driver)====
+Integrated on PS3 motherboard: [[PPX-00x]] and [[REX-001]] (probably used also in [[RTX-001]]). See: [[BD7763EFV]]
 ====NJM13403V (OPAMP - Tracking/Focus CTRL)====
@@ Line 490: / Line 467: @@
 IC309 <br />
 Worker RAM for BD <br />
-Used in [[BMD-006]] <br />
+Used in [[BMD-003]], [[BMD-006]] <br />
 [[:File:ESMT-M12L64164A-7TG-TSOPII54.png]]
@@ Line 1,128: / Line 1,105: @@
 |}
-{{Components}}<noinclude>[[Category:Main]]</noinclude>
+{{Components}}<noinclude>
+[[Category:Main]]
+</noinclude>

Bluray Drive: Difference between revisions