SW2-303: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
Line 12: Line 12:
! Pin # !! Name !! Port !! Description !! STBY Voltages
! Pin # !! Name !! Port !! Description !! STBY Voltages
|-
|-
| 1 || || || Connected to pin27 @Panasonic [[MN8647091]] || 0
| 1 || P142/SCK20/SCL20  || || Connected to pin27 @Panasonic [[MN8647091]] || 0
|-
|-
| 2 || P141 || || Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
| 2 || P141 || || Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
Line 44: Line 44:
| 16 || BUZZER || || || 0
| 16 || BUZZER || || || 0
|-
|-
| 17 || || || || 0
| 17 || P45/SO01  || || || 0
|-
|-
| 18 || P44 || || 3v @ standby || 3.0
| 18 || P44/SI01  || || 3v @ standby || 3.0
|-
|-
| 19 || || || || 0
| 19 || P43/SCK01  || || || 0
|-
|-
| 20 || || || || 0
| 20 || || || || 0
Line 56: Line 56:
| 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0
| 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0
|-
|-
| 23 || || || || 0
| 23 || P127/SO21  || || || 0
|-
|-
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
Line 170: Line 170:
| 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3
| 79 || SC_TxD(TxD3/TxD2/P13) || || 3v @ standby (3.3) || 3.3
|-
|-
| 80 || || || || 0
| 80 || P12/EX26/SO00/TxD0 || || || 0
|-
|-
| 81 || P11 || || 1v @ standby || 0
| 81 || P11 P11/EX25/SI00/RxD0  || || 1v @ standby || 0
|-
|-
| 82 || || || || 0
| 82 || P10/EX24/SCK00 || || || 0
|-
|-
| 83 || P90 || || 2v @ standby || 0
| 83 || P90 || || 2v @ standby || 0
Line 186: Line 186:
| 87 || || || || 0
| 87 || || || || 0
|-
|-
| 88 || || || || 0
| 88 || P95/SCK11/SCL11 || || || 0
|-
|-
| 89 || || || || 0
| 89 || /SI11/SDA11 || || || 0
|-
|-
| 90 || || || || 0
| 90 || P97/SO11 || || || 0
|-
|-
| 91 || || || || 0
| 91 || || || || 0
Line 252: Line 252:
| 120 || || || || 0
| 120 || || || || 0
|-
|-
| 121 || || || || 0
| 121 || P04/SCK10/SCL10 || || || 0
|-
|-
| 122 || || || || 0
| 122 || SI10/RxD1/SDA10 || || || 0
|-
|-
| 123 || || || || 0
| 123 || P02/SO10/TxD1  || || || 0
|-
|-
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
Line 264: Line 264:
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
|-
|-
| 127 || || || || 0
| 127 || P144/SO20/TxD2  || || || 0
|-
|-
| 128 || || || Connected to pin29 @Panasonic [[MN8647091]] || 0
| 128 || /SI20/RxD2/SDA20  || || Connected to pin29 @Panasonic [[MN8647091]] || 0
|}
|}
{{Wikify}}
{{Wikify}}

Revision as of 00:02, 7 January 2020

SW2-303 (SysCon)

Photo of a Syscon 'SW2-303' (QFP Packaging)


QFP Package : 128 pins
pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))


Syscon SW2-303 Unsoldered.JPG
  • True Name: uPD78F11BB

Pinout

Pin # Name Port Description STBY Voltages
1 P142/SCK20/SCL20 Connected to pin27 @Panasonic MN8647091 0
2 P141 Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) 0
3 P140 pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) 3.15
4 To +12V_MAIN through the resistor and divider 0
5 P37/POW_LED Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36/STBY_LED Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 Connected to pinAA18@SB 0
8 Connected to pinAA17@SB 0
9 CELL BE related? 0
10 0
11 P106 Connected to Backlit LEDs on switch board 0
12 P105 Connected to CONTOUR LEDs on switch board 0
13 P104 Absent element between this line and GND. Nothing else. 0
14 0
15 0
16 BUZZER 0
17 P45/SO01 0
18 P44/SI01 3v @ standby 3.0
19 P43/SCK01 0
20 0
21 TOOL1 3v @ standby 3.0
22 TOOL0/Debugger Pin? (Connected to Pin 7 @ Service Connector) (0V?) 0
23 P127/SO21 0
24 P126/THR_I2C_SDA Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) 3v @ standby (3.15)
25 P125/THR_I2C_SCL Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) 3v @ standby (3.15)
26 RESET? Connected to standby voltage regulator 463A, pin 3
27 P124 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29 P137/FLMD0 3.3v @ standby (Connected to pin 8 at Service Connector through the resistor) 3.33
30 P122 Connected to a small external oscilator 2 ? 0.8v @ standby (1.1)
31 P121 Connected to a small external oscilator 2 ? 2.2v @ standby (2.4)
32 REGC
33 GROUND/Vss0 0
34 GROUND/EVss0 0
35 Vdd Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
36 EVdd0 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
37 P60 0.2v @ standby 0
38 P61 0.2v @ standby 0
39 0
40 0
41 P31/AC IN? 3v @ standby (3.3) 3.3
42 Connected (indirectly) to voltage regulator BD9684 0906, pin 4 0
43 P65 3v @ standby 3.0
44 0
45 0
46 0
47 P76 3v @ standby (3.15) 3.15
48 P75 3v @ standby (3.15) 3.15
49 0
50 P73 Connected to voltage regulator D35653 0S25, pin 5 (And connected to pin 3 @ Service Connector) 0
51 0
52 Connected to voltage regulator BD3525, pin 12 0
53 0
54 0
55 0
56 GROUND/EVss1 0
57 EVdd1 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
58 0
59 0
60 0
61 0
62 0
63 0
64 0
65 0
66 0
67 0
68 0
69 0
70 0
71 0
72 0
73 0
74 0
75 Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16 3v @ standby (3.15) 3.15
77 P15 3v @ standby (3.3) 3.3
78 SC_RxD(RxD3/RxD2/P14) 0
79 SC_TxD(TxD3/TxD2/P13) 3v @ standby (3.3) 3.3
80 P12/EX26/SO00/TxD0 0
81 P11 P11/EX25/SI00/RxD0 1v @ standby 0
82 P10/EX24/SCK00 0
83 P90 2v @ standby 0
84 P91 3v @ standby 3.0
85 0
86 0
87 0
88 P95/SCK11/SCL11 0
89 /SI11/SDA11 0
90 P97/SO11 0
91 0
92 Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 0
94 0
95 Connected to voltage regulator BD3527 (near USB), pin 12 0
96 0
97 P101 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
98 0
99 0
100 P146 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
101 GROUND 0
102 0
103 0
104 0
105 0
106 0
107 0
108 0
109 P150 3v @ standby 3.0
110 P27/POW_SW_DET Power switch detect. Connected to switch board 3v @ standby (3.3) 3.3
111 P26/EJECT_SW_DET Eject switch detect. Connected to switch board 3v @ standby (3.3) 3.3
112 0
113 0
114 0
115 0
116 0
117 P20 (0V?) 0
118 P130/ACDC_STBY 0
119 P102 Connected to standby voltage regulator 348A, pins 2 and 7
120 0
121 P04/SCK10/SCL10 0
122 SI10/RxD1/SDA10 0
123 P02/SO10/TxD1 0
124 Connected to pin93 @Panasonic MN8647091 0
125 0
126 P145/FAN_PWM PWM Control for the Fan. 0
127 P144/SO20/TxD2 0
128 /SI20/RxD2/SDA20 Connected to pin29 @Panasonic MN8647091 0
This article is marked for rewrite/restructuring in proper wiki format.
You can help PS3 Developer wiki by editing it.


Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=SW2-303&oldid=55277"