USB

USB 2.0

GL852 USB-Hub 64-pin as seen on CECHCxx

Depending on the SKU Models the PS3 is equiped with 6x (Tool/DECR), 4 or 2 USB (Universal Serial Bus) 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.

Note: On PS3 Slim CECH-20xx/DYN-001 and later, the USB port datalines are directly connected to South Bridge without a USB-Hub chip (port is initialised via DC switch IC connected to South Bridge and TH3301 thermistor protect 5V input).

For more detailed info about the USB hub pinout see: GL852

• 

  USB lines top view (common traces for all slim models)

• 

  USB lines bottom view (common traces for all slim models)

• 

  JSD-001/JTP-001 USB connector TH3301 thermistor and DC switch IC to South Bridge

Generic USB Pinout

USB-pinout

USB 1.x/2.0 standard pinout

Pin	Color	Signal	Description
Shell	N / A	Shield	Metal housing
1	Red	VBUS	Power / +5 volt DC (max.500mA)
2	White	D-	USB 2.0 differential pair
3	Green	D+
4	Black	GND	Ground

USB 1.x/2.0 mini/micro pinout

Pin	Color	Signal	Description
Shell	N / A	Shield	Metal housing
1	Red	VBUS	Power
2	White	D-	USB 2.0 differential pair
3	Green	D+
4	N / A	ID	Permits detection of which end of a cable is plugged in: • "A" connector (host): connected to the signal ground • "B" connector (device): not connected
5	Black	GND	Ground

Note: used on many Peripherals for charging/sync