DECR-1400: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
Line 1: | Line 1: | ||
<div style="float:right">[[File:DECR 1400A top.jpg|300px|thumb|right|[[DECR-1400]] Top]]</div> | |||
<br> | |||
<br> | |||
<br> | |||
<br> | |||
= DECR-1400(A/J) = | = DECR-1400(A/J) = | ||
Revision as of 04:40, 24 August 2018
DECR-1400(A/J)
Specifications
SubModels | DECR-1400A |
---|---|
Type | 0x09 |
Motherboard | DEB-001 |
Flash Storage | 1x 16MB NOR |
CELL BE / RSX | 45nm / 65nm |
South Bridge | CXD2984GB |
Syscon | CXR714120-302GB |
CP | - |
BDemu Harddrive | |
GameOS Harddrive | 160GB |
Bluray Drive | YES |
HDMI Ports | 1 |
OtherOS | PARTIAL (Until System Firmware 3.20 included) |
USB Ports | 4 |
GbLAN Ports | 2 (1 for debugger) |
Flash Readers | No |
PS2 mode | NO (No Emotion Engine or Graphic Synthesizer on the motherboard, no ps2emu software in the official firmware) |
PS1 mode | NO (No ps1emu software in the official firmware) |
SA-CD | NO |
WiFi802.11b/g | YES |
SKU Release date | June 2009 |
SDK / Firmware support | =>2.6.0 |
downgradeable Min. praxis | 2.60 |
Other | Uses the same metldr/bootloader builds as CECH-2000 units. |
Pictures
DECR-1400 Top
DECR-1400 Back
DECR-1400 USB Ports
DECR-1400 Power Eject Board Top
DECR-1400 Power Eject Board Bottom
DECR-1400 Power Supply Bottom
DECR-1400 Power Supply Top
DECR-1400 BT/WIFI Board Bottom
DECR-1400 BT/WIFI Board Top
DECR-1400 Driveboard Bottom
DECR-1400 Driveboard Top
DECR-1400 Motherboard Top
DECR-1400 Motherboard Bottom
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
Comparison
Model | Type | Board | Flash | SB | Syscon | CP | BDemu HDD | GameOS HDD | Bluray Drive | HDMI Ports | OtherOS | CELL BE | RSX | USB Ports |
GbLan Ports |
Flash Readers |
Support: PSP PS2 PS1 |
SA- CD |
WiFi 802.11 b/g |
SKU Release date |
SDK/FW support |
downgradeable Min. praxis |
Other |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DECR-1000(A/J) | 0x01 | TMU-520 | 2x 256MB NAND | CXD2973AGB-4 | CXR713F120A | TCP-520 | 400GB | 400GB | ?0x00? | 2 (NO CEC) | NO | 90nm | 90nm | 4 + 2 extra | 4 (1 for dbg.) | YES | ?YES? NO NO |
NO | YES | 2006 | =>1.0.0 or =>2.3.0 (since 1/2009) |
0.08 | contains prototype components, hardware is identical to DEH-R1040 with a different label/model name. |
DECR-1400A/J | 0x09 | DEB-001 | 1x 16MB NOR | CXD2984AGB | CXR714120-302GB | (via SB) | - | 160 GB | ?0x0A? | 1 (NO CEC) | PARTIAL | 45nm | 65nm | 4 | 2 (1 for dbg.) | NO | ?YES? NO NO |
NO | YES | 6/2009 | =>2.6.0 | =>2.60 | same case as retail PS3 |
Differences between the 1000 and 1400:
- DECR-1000:
- Gb-DEVLAN is connected to the Communication Processor
- With a pre (or equal to) 0.85.010 bootrom you do have two HDMI outputs.
- Not all DECR-1000 are equal! Despite Sony's documentation claiming otherwise, DECR-1000 units with RSX rom version b07 and above such as refurbished/serviced units (and perhaps some others that have not been encounter) are not capable of running any firmware lower than 1.60 (from sdk 160.008) this is because the rom version is unknown/unsupported in older lv1 which will fail to initialize the RSX hardware and will cause lv1 to output a "rsx rom abort!" message, this will in turn create an exception early in lv2 boot process as it tries to use the RSX and creates a hard brick several RSX related errors such as "lv2(2): # __rsxaudio_intr_create_thread 983 ffffffff" or "graphics error 512 : 00012625 c221bbb0" ; "lv2(2): page fault handler (DSI): invalid access address 0x795d00e8!".
- DECR-1400:
- You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
- for SPU: PC sampling, Performance counters, Bookmark, RAW SPU support
- for RSX: Signal Trace, User Events.
- DECI3 is limited to one protocol and a data exchange size of 65535 bytes.
- The two GbLAN´s share the same MAC ID and cannot be used in the same network segment.
- Gb-DEVLAN is connected to South Bridge.
- You cannot use Performance monitoring functions (libperf, libprof, tuner for PS3)
|