SW2-303: Difference between revisions
Jump to navigation
Jump to search
m (this seems to be wrong or not explained properlly, is not posible to exist more syscon pins in the switch board, all are mapped and none of them is related with pin 13 of syscon) |
(→Pinout) |
||
Line 50: | Line 50: | ||
| 21 || BACKUP_MODE? || || 3v @ standby || 3.0 | | 21 || BACKUP_MODE? || || 3v @ standby || 3.0 | ||
|- | |- | ||
| 22 || || || (Connected to Pin 7 @ Service Connector) (0V?) || 0 | | 22 || TOOL0/Debugger Pin? || || (Connected to Pin 7 @ Service Connector) (0V?) || 0 | ||
|- | |- | ||
| 23 || || || || 0 | | 23 || || || || 0 |
Revision as of 23:00, 7 May 2017
SW2-303 (SysCon)
First to be seen on PS3 Slim CECH-25xx with motherboards: JSD-00x/JTP-00x
Pinout
Pin # | Name | Port | Description | STBY Voltages |
---|---|---|---|---|
1 | 0 | |||
2 | ~1V @ standby (0 V?) | 0 | ||
3 | 3V @ standby (3.15V) | 3.15 | ||
4 | 0 | |||
5 | POW_LED | 0 | ||
6 | STBY_LED | 3v @ standby (3.3V) | 3.3 | |
7 | 0 | |||
8 | 0 | |||
9 | 0 | |||
10 | 0 | |||
11 | Connected to Backlit LEDs @SWITCH Board | 0 | ||
12 | Connected to CONTOUR LEDs @SWITCH Board | 0 | ||
13 | 0 | |||
14 | 0 | |||
15 | 0 | |||
16 | BUZZER | 0 | ||
17 | 0 | |||
18 | 3v @ standby | 3.0 | ||
19 | 0 | |||
20 | 0 | |||
21 | BACKUP_MODE? | 3v @ standby | 3.0 | |
22 | TOOL0/Debugger Pin? | (Connected to Pin 7 @ Service Connector) (0V?) | 0 | |
23 | 0 | |||
24 | THR_I2C_SDA | Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) | 3v @ standby (3.15) | |
25 | THR_I2C_SCL | Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) | 3v @ standby (3.15) | |
26 | Connected to standby voltage regulator 463A, pin 3 | |||
27 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
28 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
29 | 1v @ standby (Connected to pin 8 at Service Connector) | 2.7 | ||
30 | 0.8v @ standby | 1.1 | ||
31 | 2.2v @ standby | 0.15 | ||
32 | 2.5 | |||
33 | GROUND | 0 | ||
34 | GROUND | 0 | ||
35 | 3v @ standby (3.3) | 3.3 | ||
36 | 3v @ standby (3.3) | 3.3 | ||
37 | 0.2v @ standby | 0 | ||
38 | 0.2v @ standby | 0 | ||
39 | 0 | |||
40 | 0 | |||
41 | AC IN? | 3v @ standby (3.3) | 3.3 | |
42 | 0 | |||
43 | DIAG_MODE? | 3v @ standby | 3.0 | |
44 | 0 | |||
45 | 0 | |||
46 | 0 | |||
47 | 3v @ standby (3.15) | 3.15 | ||
48 | 3v @ standby (3.15) | 3.15 | ||
49 | 0 | |||
50 | (Connected to pin 3 @ Service Connector) | 0 | ||
51 | 0 | |||
52 | 0 | |||
53 | 0 | |||
54 | 0 | |||
55 | 0 | |||
56 | GROUND | 0 | ||
57 | 3v @ standby (3.3) | 3.3 | ||
58 | 0 | |||
59 | 0 | |||
60 | 0 | |||
61 | 0 | |||
62 | 0 | |||
63 | 0 | |||
64 | 0 | |||
65 | 0 | |||
66 | 0 | |||
67 | 0 | |||
68 | 0 | |||
69 | 0 | |||
70 | 0 | |||
71 | 0 | |||
72 | 0 | |||
73 | 0 | |||
74 | 0 | |||
75 | 0 | |||
76 | 3v @ standby (3.15) | 3.15 | ||
77 | 3v @ standby (3.3) | 3.3 | ||
78 | SC_RxD | 0 | ||
79 | SC_TxD | 3v @ standby (3.3) | 3.3 | |
80 | 0 | |||
81 | 1v @ standby | 0 | ||
82 | 0 | |||
83 | 2v @ standby | 0 | ||
84 | 3v @ standby | 3.0 | ||
85 | 0 | |||
86 | 0 | |||
87 | 0 | |||
88 | 0 | |||
89 | 0 | |||
90 | 0 | |||
91 | 0 | |||
92 | 0 | |||
93 | 0 | |||
94 | 0 | |||
95 | 0 | |||
96 | 0 | |||
97 | 3v @ standby (3.3) | 3.3 | ||
98 | 0 | |||
99 | 0 | |||
100 | 3v @ standby (3.3) | 3.3 | ||
101 | GROUND | 0 | ||
102 | 0 | |||
103 | 0 | |||
104 | 0 | |||
105 | 0 | |||
106 | 0 | |||
107 | 0 | |||
108 | 0 | |||
109 | 3v @ standby | 3.0 | ||
110 | /POW_SW | 3v @ standby (3.3) | 3.3 | |
111 | /EJECT_SW | 3v @ standby (3.3) | 3.3 | |
112 | 0 | |||
113 | 0 | |||
114 | 0 | |||
115 | 0 | |||
116 | 0 | |||
117 | (0V?) | 0 | ||
118 | ACDC_STBY | 0 | ||
119 | Connected to standby voltage regulator 348A, pins 2 and 7 | |||
120 | 0 | |||
121 | 0 | |||
122 | 0 | |||
123 | 0 | |||
124 | 0 | |||
125 | 0 | |||
126 | FAN_PWM | PWM Control for the Fan. | 0 | |
127 | 0 | |||
128 | 0 |
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
|