GbLAN: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (Created page with "= Gigabit LAN = The PS3 has 1 Gigabit Ethernet port. The port accepts Auto-MDIX (automatic medium-dependent interface crossover), so no need for special crosscables when hooking...")
 
m (pastie -> gist)
 
(26 intermediate revisions by 3 users not shown)
Line 9: Line 9:
! Ports !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description
! Ports !! Size !! Speed !! Voltage !! Packaging !! Manufacturer !! Serial Number !! Description
|-
|-
| 8 (3 used) || 20x20mm || Xtal X3501: 25MHz || 3.3V/1.9V/1.2V || 144-pin TQFP || Marvell || 88E6108-LAR1 || Used in earlier models
| 8 (3 used) || 20x20mm || Xtal X3501: 25MHz || 3.3V/1.9V/1.2V || 144-pin TQFP || Marvell Alaska || [[88E6108-LAR1]] || Used in earlier models (up to [[CECHGxx]]/[[SEM-00x|SEM-001]])
|-
|-
| - || - || - || - || 64-pin QFN || Marvell || Alaska 88E111R || Used in Slim models
| ? || ? || ? || ? || ? || Marvell Alaska || [[88E6106-LKJ1]] || Used in later models ([[CECHHxx]]/[[DIA-00x|DIA-001]])
|-
|-
|}
| ? || ? || ? || ? || ? || ? || ? || DIA-002 (CECHJxx, CECHKxx)
:
 
 
=== Marvell 88E6108-LAR1 ===
 
<div style="float:right">[[File:Marvell 88E6108-LAR1.JPG|200px|thumb|left|144-TQFP<br />Marvell 88E6108-LAR1]]</div>
 
Datasheet: (not available)
 
<pre>productcode meaning:
88E6108-LAR1
 
Type: Ethernet
Speed : 1Gbps
Ports : 8
Package : 144-TQFP
 
(sorry, no explaination yet)</pre>
 
The Marvell 88E6108-LAR1 is sort of a switching hub chip, with several ports that can be used in different configurations:
<pre>Port 0 (usuable as MDI 4 dif.pair) : unused (tied to ground)
Port 1 (usuable as MDI 4 dif.pair) : unused (tied to ground)
Port 2 (usuable as MDI 4 dif.pair) : wired to external UTP connector
Port 3 (GMII): Wired to SB
Port 4 (usable as TX/RX dif.pair)(100FX): wired to Wifi
Port 5 (usable as TX/RX dif.pair): unused (tied to ground)
Port 6 (usable as TX/RX dif.pair): unused (tied to ground)
Port 7 (usable as TX/RX dif.pair): unused (tied to ground)</pre>
 
==== Pinout IC3503====
Productcode: 88E6108-B2-LAR1C000-P123 | PartNo.: 6-710-202-01
<div style="height:400px; overflow:auto">
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin # !! Name !! Port !! Description
|-
| 1 || RST || rowspan="36" | Power / Led / Xtal etc || -
|-
| 2 || AVDD || -
|-
| 3 || NC || No Connection
|-
| 4 || NC || No Connection
|-
| 5 || NC || No Connection
|-
| 6 || AVDD || -
|-
| 7 || XTAL_IN || -
|-
| 8 || XTAL_OUT || -
|-
| 9 || VDD_CORE || -
|-
| 10 || NC || No Connection
|-
| 11 || NC || No Connection
|-
| 12 || AVDD || -
|-
| 13 || NC || No Connection
|-
| 14 || NC || No Connection
|-
| 15 || P0_LED3 || -
|-
| 16 || P0_LED2 || -
|-
| 17 || VDD_CORE || -
|-
| 18 || P0_LED1 || -
|-
| 19 || P0_LED0 || -
|-
| 20 || VDDO_LED || -
|-
| 21 || P1_LED3 || -
|-
| 22 || VDD_CORE || -
|-
| 23 || P1_LED3 || -
|-
| 24 || P1_LED1 || -
|-
| 25 || P1_LED0 || -
|-
| 26 || VDDO_LED || -
|-
| 27 || P2_LED3 || -
|-
| 28 || P2_LED2 || -
|-
| 29 || P2_LED1 || -
|-
| 30 || P2_LED0 || -
|-
| 31 || VDD_CORE || -
|-
| 32 || MDC_PHY/PPU_EN || -
|-
| 33 || VDDO_SMI_PHY || -
|-
| 34 || MDIO_PHY || -
|-
| 35 || VDD_PLL || -
|-
| 36 || VDD_CORE || -
|-
| 37 || P7_TXP || rowspan="5" | Port 7<br />(unused) || -
|-
| 38 || P7_TXN || -
|-
| 39 || P7_VDDAH || Ground
|-
| 40 || P7_RXP || -
|-
| 41 || P7_RXN || -
|-
| 42 || VSS || || Ground
|-
| 43 || P6_RXP || rowspan="5" | Port 6<br />(unused) || -
|-
| 44 || P6_RXN || -
|-
| 45 || P6_VDDAH || Ground
|-
| 46 || P6_TXN || -
|-
| 47 || P6_TXP || -
|-
| 48 || VDD_CORE || || -
|-
| 49 || P5_TXP || rowspan="5" | Port 5<br />(unused) || -
|-
| 50 || P5_TXN || -
|-
| 51 || P5_VDDAH || Ground
|-
| 52 || P5_RXP || -
|-
| 53 || P5_RXN || -
|-
| 54 || VSS || || Ground
|-
| 55 || P4_RXN || rowspan="5" | Port 4 (100FX) || -
|-
| 56 || P4_RXP || -
|-
| 57 || P4_VDDAH || -
|-
| 58 || P4_TXN || -
|-
| 59 || P4_TXP || -
|-
| 60 || VDD_CORE || || -
|-
| 61 || VDD_P3 || rowspan="46" | Port 3 (GMII) || -
|-
| 62 || P3_CLK125N || -
|-
| 63 || P3_TXEN/HALFDPX || -
|-
| 64 || P3_TXD7/MODE2 || -
|-
| 65 || P3_TXD6/MODE1 || -
|-
| 66 || VDD_CORE || -
|-
| 67 || P3_TXD5/MODE0 || -
|-
| 68 || P3_TXD4/ADDR4 || -
|-
| 69 || VDD0_P3 || -
|-
| 70 || P3_TXD3/ADDR3 || -
|-
| 71 || P3_TXD2/ADDR2 || -
|-
| 72 || P3_TXD1/ADDR1 || -
|-
| 73 || P3_TXD0/ADDR0 || -
|-
| 74 || P3_TXCLK || -
|-
| 75 || P3_GTXCLK || -
|-
| 76 || VDD0_P3 || -
|-
| 77 || P3_RXDV || -
|-
| 78 || VDD_CORE || -
|-
| 79 || P3_RXXEA || -
|-
| 80 || P3_RXD7 || -
|-
| 81 || P3_RXD6 || -
|-
| 82 || P3_RXD5 || -
|-
| 83 || P3_RXD4 || -
|-
| 84 || VDD_CORE || -
|-
| 85 || P3_RXD3 || -
|-
| 86 || VDDO_P3 || -
|-
| 87 || P3_RXD2 || -
|-
| 88 || P3_RXD1 || -
|-
| 89 || P3_RXD0 || -
|-
| 90 || P3_RXCLK || -
|-
| 91 || VDD_CORE || -
|-
| 92 || P3_CRS || -
|-
| 93 || P3_COL || -
|-
| 94 || P3_ENABLE_PD || -
|-
| 95 || INTn || -
|-
| 96 || MDIO_CPU || -
|-
| 97 || MDC_CPU || -
|-
| 98 || VDD_CORE || -
|-
| 99 || EE_DOUT || -
|-
| 100 || VDDO_SMI_CPU || -
|-
| 101 || EE_DIN/HD_FLOW_DIS || -
|-
| 102 || EE_CLK/FD_FLOW_DIS || -
|-
| 103 || EE_CS/EE_1K || -
|-
| 104 || VDD_CORE || -
|-
| 105 || SW_MODE0 PU || -
|-
| 106 || SW_MODE1 PU || -
|-
| 107 || VSS ||  || Ground
|-
| 108 || RESETn ||  || -
|-
| 109 || VSS || rowspan="12" | Port 2 (MDI) || Ground
|-
| 110 || P2_MDIN3 || -
|-
| 111 || P2_MDIP3 || -
|-
| 112 || P2_AVDD || -
|-
| 113 || P2_MDIN2 || -
|-
| 114 || P2_MDIP2 || -
|-
| 115 || P2_MDIN1 || -
|-
| 116 || P2_MDIP1 || -
|-
| 117 || P2_AVDD || -
|-
| 118 || P2_AVDD || -
|-
| 119 || P2_MDIN0 || -
|-
| 120 || P2_MDIP0 || -
|-
| 121 || VSS || rowspan="12" | Port 1 (MDI) || Ground
|-
| 122 || P1_MDIN3 || -
|-
| 123 || P1_MDIP3 || -
|-
| 124 || P1_AVDD || -
|-
| 125 || P1_MDIN2 || -
|-
| 126 || P1_MDIP2 || -
|-
| 127 || P1_MDIN1 || -
|-
| 128 || P1_MDIP1 || -
|-
| 129 || P1_AVDD || -
|-
|-
| 130 || P1_AVDD || -
| ? || ? || ? || ? || ? || ? || ? || VER-001 (CECHLxx, CECHMxx, CECHPxx, CECHQxx)
|-
|-
| 131 || P1_MDIN0 || -
| - || - || 125MHz || 3.3V, 2.5V or 1.8V || 64-pin QFN || Marvell Alaska || [[88E1118R-NNC2]] || Used in Slim models ([[CECH-20xx]]/[[DYN-00x]] and [[CECH-21xx]]/[[SUR-00x|SUR-001]])
|-
|-
| 132 || P1_MDIP0 || -
| - || 6,5x6,5mm || - || - || 48-pin || Marvell Alaska || [[88E1310-NNB2]] || Used in Slim models ([[CECH-25xx]]/[[JTP-00x|JTP-001]]/[[JSD-00x|JSD-001]], [[CECH-30xx]]/[[KTE-00x|KTE-001]])
|-
|-
| 133 || VSS || rowspan="12" | Port 0 (MDI) || Ground
| ? || ? || ? || ? || ? || ? || ? || superslims ?
|-
| 134 || P0_MDIN3 || -
|-
| 135 || P0_MDIP3 || -
|-
| 136 || P0_AVDD || -
|-
| 137 || P0_MDIN2 || -
|-
| 138 || P0_MDIP2 || -
|-
| 139 || P0_MDIN1 || -
|-
| 140 || P0_MDIP1 || -
|-
| 141 || P0_AVDD || -
|-
| 142 || P0_AVDD || -
|-
| 143 || P0_MDIN0 || -
|-
| 144 || P1_MDIP0 || -
|-
|-
|}
|}
</div>
:
 
== Jumbo frames ==
From Linux perspective (under OtherOS &lt;=3.15), the old drivers set the [http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=drivers/net/ps3_gelic_net.h;h=5e1c28654e16146918a70e2efbbd3da4619a939f;hb=02c1889166b47b9ade309a8f4b7c4ddf0489d869#l44 MTU to 2308], while newer versions set the [http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=drivers/net/ps3_gelic_net.h;h=d9a55b93898b24f2b67a6f54accc5ee064d79bbb;hb=HEAD#l35 MTU of 1518]. This could be a hypervisor restriction (needs research).


MTU is set with vsh using syscall net_ioctl (libnet)


==== Pinout CN3501 ====
On 3.41 firmware, with a [https://gist.github.com/jevinskie/945199a90858319642ded49df632554e modified ps3_gelic driver], frames of 1624 bytes can be sent and frames of 1628 bytes can be received.
Connectortype: RJ45 modular jack with LED | PartNo.: 1-820-763-12
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"  
=== Efficiency ===
|- bgcolor="#cccccc"
{| class="wikitable" style="text-align:center;"
! Pin # !! Name !! Description
! Frame type !! colspan=2 | Layer 1 overhead !! colspan=2 | Layer 2 overhead !! MTU !! Layer 3 overhead !! Layer 4 overhead !! Payload size !! Total transmitted !! Efficiency
|-
|-
| 1 || VCC || -
| Standard || rowspan="4" | preamble<br />8 byte || rowspan="4" | IPG<br />12 byte || rowspan="4" | frame header<br />14 byte || rowspan="4" | FCS<br />4 byte || 1500 || rowspan="4" | IPv4 header<br />20 byte || rowspan="4" | TCP header<br />20 byte || 1460 byte || 1538 byte || {{round|94.928478544}}%
|-
|-
| 2 || TP1+ || -
| old gelic || 2308 || 2268 byte || 2346 byte || {{round|96.675191816}}%
|-
|-
| 3 || TP1- || -
| new gelic || 1518 || 1478 byte || 1556 byte || {{round|94.98714653}}%
|-
|-
| 4 || TP2+ || -
| mod gelic || 1624 || 1584 byte || 1662 byte || {{round|95.306859206}}%
|-
| 5 || TP2- || -
|-
| 6 || GND || -
|-
| 7 || TP3+ || -
|-
| 8 || TP3- || -
|-
| 9 || TP4+ || -
|-
| 10 || TP4- || -
|-
| 11 || VCC || -
|-
|-
|}
|}


=== Marvell Alaska 88E111R ===


[http://www.marvell.com/products/transceivers/alaska_gigabit_ethernet_transceivers/Alaska_88E1112_r4.pdf Productsheet]
<pre>productcode meaning:
88E111R
Type: Ethernet
Speed : 1Gbps
Package : 64-pin QFN
(sorry, no explaination yet)</pre>
==== pinout ====
(nothing here, please help fill this in)
<div style="height:400px; overflow:auto">
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin # !! Name !! Port !! Description
|-
| 1 || - || || -
|-
| 2 || - || || -
|-
| 3 || - || || -
|-
| 4 || - || || -
|-
| 5 || - || || -
|-
| 6 || - || || -
|-
| 7 || - || || -
|-
| 8 || - || || -
|-
| 9 || - || || -
|-
| 10 || - || || -
|-
| 11 || - || || -
|-
| 12 || - || || -
|-
| 13 || - || || -
|-
| 14 || - || || -
|-
| 15 || - || || -
|-
| 16 || - || || -
|-
| 17 || - || || -
|-
| 18 || - || || -
|-
| 19 || - || || -
|-
| 20 || - || || -
|-
| 21 || - || || -
|-
| 22 || - || || -
|-
| 23 || - || || -
|-
| 24 || - || || -
|-
| 25 || - || || -
|-
| 26 || - || || -
|-
| 27 || - || || -
|-
| 28 || - || || -
|-
| 29 || - || || -
|-
| 30 || - || || -
|-
| 31 || - || || -
|-
| 32 || - || || -
|-
| 33 || - || || -
|-
| 34 || - || || -
|-
| 35 || - || || -
|-
| 36 || - || || -
|-
| 37 || - || || -
|-
| 38 || - || || -
|-
| 39 || - || || -
|-
| 40 || - || || -
|-
| 41 || - || || -
|-
| 42 || - || || -
|-
| 43 || - || || -
|-
| 44 || - || || -
|-
| 45 || - || || -
|-
| 46 || - || || -
|-
| 47 || - || || -
|-
| 48 || - || || -
|-
| 49 || - || || -
|-
| 50 || - || || -
|-
| 51 || - || || -
|-
| 52 || - || || -
|-
| 53 || - || || -
|-
| 54 || - || || -
|-
| 55 || - || || -
|-
| 56 || - || || -
|-
| 57 || - || || -
|-
| 58 || - || || -
|-
| 59 || - || || -
|-
| 60 || - || || -
|-
| 61 || - || || -
|-
| 62 || - || || -
|-
| 63 || - || || -
|-
| 64 || - || || -
|-
|}
</div>


== Jumbo frames ==
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
From Linux perspective (under OtherOS &lt;=3.15), the old drivers set the [http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=drivers/net/ps3_gelic_net.h;h=5e1c28654e16146918a70e2efbbd3da4619a939f;hb=02c1889166b47b9ade309a8f4b7c4ddf0489d869#l44 MTU to 2308], while newer versions set the [http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=drivers/net/ps3_gelic_net.h;h=d9a55b93898b24f2b67a6f54accc5ee064d79bbb;hb=HEAD#l35 MTU of 1518]. This could be a hypervisor restriction (needs research).

Latest revision as of 07:56, 31 August 2018

Gigabit LAN[edit | edit source]

The PS3 has 1 Gigabit Ethernet port. The port accepts Auto-MDIX (automatic medium-dependent interface crossover), so no need for special crosscables when hooking up the PS3 direct to the PC.

Gigabit LAN chips used[edit | edit source]

A sample of the GbLAN chips in different PS3 models:

Ports Size Speed Voltage Packaging Manufacturer Serial Number Description
8 (3 used) 20x20mm Xtal X3501: 25MHz 3.3V/1.9V/1.2V 144-pin TQFP Marvell Alaska 88E6108-LAR1 Used in earlier models (up to CECHGxx/SEM-001)
? ? ? ? ? Marvell Alaska 88E6106-LKJ1 Used in later models (CECHHxx/DIA-001)
? ? ? ? ? ? ? DIA-002 (CECHJxx, CECHKxx)
? ? ? ? ? ? ? VER-001 (CECHLxx, CECHMxx, CECHPxx, CECHQxx)
- - 125MHz 3.3V, 2.5V or 1.8V 64-pin QFN Marvell Alaska 88E1118R-NNC2 Used in Slim models (CECH-20xx/DYN-00x and CECH-21xx/SUR-001)
- 6,5x6,5mm - - 48-pin Marvell Alaska 88E1310-NNB2 Used in Slim models (CECH-25xx/JTP-001/JSD-001, CECH-30xx/KTE-001)
? ? ? ? ? ? ? superslims ?

Jumbo frames[edit | edit source]

From Linux perspective (under OtherOS <=3.15), the old drivers set the MTU to 2308, while newer versions set the MTU of 1518. This could be a hypervisor restriction (needs research). 

MTU is set with vsh using syscall net_ioctl (libnet)

On 3.41 firmware, with a modified ps3_gelic driver, frames of 1624 bytes can be sent and frames of 1628 bytes can be received.

Efficiency[edit | edit source]

Frame type Layer 1 overhead Layer 2 overhead MTU Layer 3 overhead Layer 4 overhead Payload size Total transmitted Efficiency
Standard preamble
8 byte		 IPG
12 byte		 frame header
14 byte		 FCS
4 byte		 1500 IPv4 header
20 byte		 TCP header
20 byte		 1460 byte 1538 byte 94.93%
old gelic 2308 2268 byte 2346 byte 96.68%
new gelic 1518 1478 byte 1556 byte 94.99%
mod gelic 1624 1584 byte 1662 byte 95.31%


Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=GbLAN&oldid=50182"