USB: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
m (Text replacement - "!important!important" to "!important")
 
(11 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<div style="float:right">[[File:CECHC GL852- IC3305.JPG|200px|thumb|left|GL852 USB-Hub as seen on [[CECHCxx]]]]</div>
= USB 2.0 =
= USB 2.0 =
<div style="float:right">[[File:CECHC GL852- IC3305.JPG|200px|thumb|left|[[GL852]] USB-Hub 64-pin as seen on [[CECHCxx]]]]</div>
Depending on the [[SKU Models]] the PS3 is equiped with 6x (Tool/DECR), 4 or 2 [http://en.wikipedia.org/wiki/USB USB (Universal Serial Bus)] 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.
Depending on the [[SKU Models]] the PS3 is equiped with 6x (Tool/DECR), 4 or 2 [http://en.wikipedia.org/wiki/USB USB (Universal Serial Bus)] 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.


'''Note:''' On PS3 Slim [[CECH-20xx]]/[[DYN-00x|DYN-001]] and later, the USB port datalines are directly connected to [[South Bridge]] without a USB-Hub chip (port is initialised via DC switch IC connected to [[South Bridge]] and TH3301 thermistor protect 5V input).
'''Note:''' On PS3 Slim [[CECH-20xx]]/[[DYN-00x|DYN-001]] and later, the USB port datalines are directly connected to [[South Bridge]] without a USB-Hub chip (port is initialised via DC switch IC connected to [[South Bridge]] and TH3301 thermistor protect 5V input).
For more detailed info about the USB hub pinout see: [[GL852]]
<gallery>
<gallery>
File:DYN-001 USB lines (top view).jpg|USB lines top view (common traces for all slim models)
File:DYN-001 USB lines (top view).jpg|USB lines top view (common traces for all slim models)
Line 18: Line 19:
|+ USB 1.x/2.0 standard pinout
|+ USB 1.x/2.0 standard pinout
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin !! Color !! Signal !! Description
|-
| Shell || {{NA}} || Shield || Metal housing
|-
|-
| 1 || style="color:white; background-color:#CC3333;" | V<sub>BUS</sub> || style="color:white; background-color:#CC3333;" | +5 volt DC (max.500mA)
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power / +5 volt DC (max.500mA)
|-
|-
| 2 || D- || Data-
| 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair
|-
|-
| 3 || D+ || Data+
| 3 || style="color:white; background-color:#33CC33;" | Green || D+
|-
|-
| 4 || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | Ground
| 4 || style="color:white; background-color:#333333;" | Black || GND || Ground
|-
|-
|}
|}
Line 33: Line 36:
|+ USB 1.x/2.0 mini/micro pinout
|+ USB 1.x/2.0 mini/micro pinout
|- bgcolor="#cccccc"
|- bgcolor="#cccccc"
! Pin !! Signal !! Description
! Pin !! Color !! Signal !! Description
|-
| 1 || style="color:white; background-color:#CC3333;" | V<sub>BUS</sub> || style="color:white; background-color:#CC3333;" | +5 volt DC (max.500mA)
|-
| 2 || D- || Data-
|-
| 3 || D+ || Data+
|-
| 4 || ID || Permits detection of which end of a cable is plugged in:<br/>• "A" connector (host): connected to the signal ground<br>• "B" connector (device): not connected
|-
| 5 || style="color:white; background-color:#333333;" | GND || style="color:white; background-color:#333333;" | Ground
|-
|}
 
== Internal USB-Hub IC's ==
<div style="float:right">[[File:Genesys-GL852-MSG-LQFP64.png|200px|thumb|left|64pin LQFP<br />Genesys GL852-MSG02-MT]]<br />[[File:Genesys-GL852-MSG-QFN48.png|200px|thumb|left|48pin QFN<br />Genesys GL852]]</div>
 
=== GL852-MSG02-MT (USB-Hub 64pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
6-806-862-01 / IC3305 <br />
Used in PS3 FAT CECHA/COK-001 and CECHB/COK-001
 
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable sortable" style="border:1px solid #999; border-collapse: collapse;"
|- bgcolor="#cccccc"
! Pin Name !! 64 Pin# !! 48Pin# !! I/O Type !! Description  
|-
| DM0,DP0 || 3,4 || 3,4 || B || USB signals for USPORT
|-
| DM1,DP1 || 8,9 || 5,6 || B || USB signals for DSPORT1
|-
| DM2,DP2 || 14,15 || 9,10 || B || USB signals for DSPORT2
|-
| DM3,DP3 || 25,26 || 17,18 || B || USB signals for DSPORT3
|-
| DM4,DP4 || 31,32 || 21,22 || B || USB signals for DSPORT4
|-
| RREF || 17 || 11 || B || A 680Ω resister must be connected between RREF and analog ground (AGND).
|-
| OVCUR1#~4 || 56,54,42,40 || 42,40,30,28 || I<br />(pu) || Active low. Over current indicator for DSPORT1~4 OVCUR1# is the only over current flag for GANG mode.
|-
| PWREN1#~4 || 57,55,43,41 || 43,41,31,29 || O || Active low. Power enable output for DSPORT1~4 <br />PWREN1# is the only power-enable output for GANG mode.
|-
| GREEN1~4 || 60,48,44,34 || 45,35,32,23 || 1,3,4: O<br />2: B<br />(pd) || Green LED indicator for DSPORT1~4<br />*GREEN[1~2] are also used to access the external EEPROM. For detailed information, please refer to Chapter 5.
|-
| AMBER1~4 || 61,49,45,35 || 46,36,33,24 || O<br />(pd) || Amber LED indicator for DSPORT1~4<br />*Amber [1~2] are also used to access the external EEPROM
|-
| PSELF || 50 || 37 || I || 0: GL852 is bus-powered.<br /> 1: GL852 is self-powered.
|-
| PGANG/<br />SUSPND || 53 || 39 || B || This pin is default put in input mode after power-on reset. Individual/gang mode is strapped during this period. After the strapping period, this pin will be set to output mode, and then output high for normal mode. When GL852 is suspended, this pin will output low. *For detailed explanation, please see Chapter 5<br />
Gang      input:1, output: 0@normal, 1@suspend <br />
Individual  input:0, output: 1@normal, 0@suspend
|-
| X1 || 20 || 14 || I || 12MHz crystal clock input.
|-
| X2 || 21 || 15 || O || 12MHz crystal clock output.
|-
| RESET# || 38 || 26 || I || Active low. External reset input, default pull high 10KΩ. When RESET# = low, whole chip is reset to the initial state.
|-
|-
| TEST || 39 || 27 || I<br />(pd) || 0: Normal operation.<br />1: Chip will be put in test mode.
| Shell || {{NA}} || Shield || Metal housing
|-
|-
| AVDD || 11,18,22,28,64 || 1,7,12,16,19 || P || 3.3V analog power input for analog circuits.
| 1 || style="color:white; background-color:#CC3333;" | Red || V<sub>BUS</sub> || Power
|-
|-
| AGND || 1,12,19,23,29 || 2,8,13,20 || P || Analog ground input for analog circuits.  
| 2 || style="color:black!important; background-color:white;" | White || D- || rowspan="2" | USB 2.0 differential pair
|-
|-
| DVDD || 37,47,52,59 || 25,34,38,44,48 || P || 3.3V digital power input for digital circuits
| 3 || style="color:white; background-color:#33CC33;" | Green || D+
|-
|-
| DGND || 36,46,51,58,62 || 47 || P || Digital ground input for digital circuits.
| 4 || {{NA}} || ID || Permits detection of which end of a cable is plugged in:<br/>• "A" connector (host): connected to the signal ground<br>• "B" connector (device): not connected
|-
|-
| NC || 2,5~7,10,13,16,24,27,30,33 || - || - || No connection
| 5 || style="color:white; background-color:#333333;" | Black || GND || Ground
|-
|-
|}
|}'''Note:''' used on many [[Peripherals]] for charging/sync
<pre> Type
O    Output
I    Input
B    Bi-directional
B/I  Bi-directional, default input
B/O  Bi-directional, default output
P    Power / Ground
A    Analog
SO    Automatic output low when suspend
pu    Internal pull up
pd    Internal pull down
odpu  Open drain with internal pull up</pre>
 
 
=== GL852 (USB-Hub 64pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHC/COK-002
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHG/SEM-001
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
[[Wifi#UWB-001]] <br />
Used in PS3 FAT CECHH/DIA-001
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
[[Wifi#UWB-001]] <br />
Used in PS3 FAT CECHJ/DIA-002 and CECHK/DIA-002
 
=== GL852 (USB-Hub 48pin) ===
Datasheet: http://www.ps3devwiki.com/files/documents/-Datasheets/USB/Genesys_Logic_GL852.pdf <br />
Used in PS3 FAT CECHL/VER-001 up and including CECHQ/VER-001
 
 


{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 05:16, 1 July 2023

USB 2.0[edit | edit source]

GL852 USB-Hub 64-pin as seen on CECHCxx

Depending on the SKU Models the PS3 is equiped with 6x (Tool/DECR), 4 or 2 USB (Universal Serial Bus) 2.0 ports with maximum bandwidth of 480 Mbit/s (~57 MB/s), connected internally to a USB-Hub chip.

Note: On PS3 Slim CECH-20xx/DYN-001 and later, the USB port datalines are directly connected to South Bridge without a USB-Hub chip (port is initialised via DC switch IC connected to South Bridge and TH3301 thermistor protect 5V input).

For more detailed info about the USB hub pinout see: GL852

Generic USB Pinout[edit | edit source]

USB-pinout
USB 1.x/2.0 standard pinout
Pin Color Signal Description
Shell N / A Shield Metal housing
1 Red VBUS Power / +5 volt DC (max.500mA)
2 White D- USB 2.0 differential pair
3 Green D+
4 Black GND Ground
USB 1.x/2.0 mini/micro pinout
Pin Color Signal Description
Shell N / A Shield Metal housing
1 Red VBUS Power
2 White D- USB 2.0 differential pair
3 Green D+
4 N / A ID Permits detection of which end of a cable is plugged in:
• "A" connector (host): connected to the signal ground
• "B" connector (device): not connected
5 Black GND Ground

Note: used on many Peripherals for charging/sync

Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=USB&oldid=72671"