SW2-303: Difference between revisions
Jump to navigation
Jump to search
(the big black external oscillator is connected to pins 27 and 28... there is another tiny one at pins 30 and 31 btw) |
No edit summary |
||
Line 58: | Line 58: | ||
| 25 || THR_I2C_SCL || || Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) || 3v @ standby (3.15) | | 25 || THR_I2C_SCL || || Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) || 3v @ standby (3.15) | ||
|- | |- | ||
| 26 || || || || | | 26 || || || || Connected with standby voltage regulator, pin 3 | ||
|- | |- | ||
| 27 || || || CLK -> 1-2V Amplitude (32.768Khz?) || | | 27 || || || CLK -> 1-2V Amplitude (32.768Khz?) || | ||
Line 66: | Line 66: | ||
| 29 || || || 1v @ standby (Connected to pin 8 at Service Connector) || 2.7 | | 29 || || || 1v @ standby (Connected to pin 8 at Service Connector) || 2.7 | ||
|- | |- | ||
| 30 || || || 0.8v @ standby || 1.1 | | 30 || || || 0.8v @ standby <!-- oscillator --> || 1.1 | ||
|- | |- | ||
| 31 || || || 2.2v @ standby || 0.15 | | 31 || || || 2.2v @ standby <!-- oscillator --> || 0.15 | ||
|- | |- | ||
| 32 || || || || 2.5 | | 32 || || || || 2.5 |
Revision as of 20:09, 18 June 2015
SW2-303 (SysCon)
First to be seen on PS3 Slim CECH-25xx with motherboards: JSD-00x/JTP-00x
Pinout
Pin # | Name | Port | Description | STBY Voltages |
---|---|---|---|---|
1 | 0 | |||
2 | ~1V @ standby (0 V?) | 0 | ||
3 | 3V @ standby (3.15V) | 3.15 | ||
4 | 0 | |||
5 | POW_LED | 0 | ||
6 | STBY_LED | 3v @ standby (3.3V) | 3.3 | |
7 | 0 | |||
8 | 0 | |||
9 | 0 | |||
10 | 0 | |||
11 | Connected to Backlit LEDs @SWITCH Board | 0 | ||
12 | Connected to CONTOUR LEDs @SWITCH Board | 0 | ||
13 | Connected to Pogo pin @SWITCH Board, seems its a service pin. | 0 | ||
14 | 0 | |||
15 | 0 | |||
16 | BUZZER | 0 | ||
17 | 0 | |||
18 | 3v @ standby | 3.0 | ||
19 | 0 | |||
20 | 0 | |||
21 | BACKUP_MODE? | 3v @ standby | 3.0 | |
22 | (Connected to Pin 7 @ Service Connector) (0V?) | 0 | ||
23 | 0 | |||
24 | THR_I2C_SDA | Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) | 3v @ standby (3.15) | |
25 | THR_I2C_SCL | Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) | 3v @ standby (3.15) | |
26 | Connected with standby voltage regulator, pin 3 | |||
27 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
28 | CLK -> 1-2V Amplitude (32.768Khz?) | |||
29 | 1v @ standby (Connected to pin 8 at Service Connector) | 2.7 | ||
30 | 0.8v @ standby | 1.1 | ||
31 | 2.2v @ standby | 0.15 | ||
32 | 2.5 | |||
33 | GROUND | 0 | ||
34 | GROUND | 0 | ||
35 | 3v @ standby (3.3) | 3.3 | ||
36 | 3v @ standby (3.3) | 3.3 | ||
37 | 0.2v @ standby | 0 | ||
38 | 0.2v @ standby | 0 | ||
39 | 0 | |||
40 | 0 | |||
41 | AC IN? | 3v @ standby (3.3) | 3.3 | |
42 | 0 | |||
43 | DIAG_MODE? | 3v @ standby | 3.0 | |
44 | 0 | |||
45 | 0 | |||
46 | 0 | |||
47 | 3v @ standby (3.15) | 3.15 | ||
48 | 3v @ standby (3.15) | 3.15 | ||
49 | 0 | |||
50 | (Connected to pin 3 @ Service Connector) | 0 | ||
51 | 0 | |||
52 | 0 | |||
53 | 0 | |||
54 | 0 | |||
55 | 0 | |||
56 | GROUND | 0 | ||
57 | 3v @ standby (3.3) | 3.3 | ||
58 | 0 | |||
59 | 0 | |||
60 | 0 | |||
61 | 0 | |||
62 | 0 | |||
63 | 0 | |||
64 | 0 | |||
65 | 0 | |||
66 | 0 | |||
67 | 0 | |||
68 | 0 | |||
69 | 0 | |||
70 | 0 | |||
71 | 0 | |||
72 | 0 | |||
73 | 0 | |||
74 | 0 | |||
75 | 0 | |||
76 | 3v @ standby (3.15) | 3.15 | ||
77 | 3v @ standby (3.3) | 3.3 | ||
78 | SC_RxD | 0 | ||
79 | SC_TxD | 3v @ standby (3.3) | 3.3 | |
80 | 0 | |||
81 | 1v @ standby | 0 | ||
82 | 0 | |||
83 | 2v @ standby | 0 | ||
84 | 3v @ standby | 3.0 | ||
85 | 0 | |||
86 | 0 | |||
87 | 0 | |||
88 | 0 | |||
89 | 0 | |||
90 | 0 | |||
91 | 0 | |||
92 | 0 | |||
93 | 0 | |||
94 | 0 | |||
95 | 0 | |||
96 | 0 | |||
97 | 3v @ standby (3.3) | 3.3 | ||
98 | 0 | |||
99 | 0 | |||
100 | 3v @ standby (3.3) | 3.3 | ||
101 | GROUND | 0 | ||
102 | 0 | |||
103 | 0 | |||
104 | 0 | |||
105 | 0 | |||
106 | 0 | |||
107 | 0 | |||
108 | 0 | |||
109 | 3v @ standby | 3.0 | ||
110 | /POW_SW | 3v @ standby (3.3) | 3.3 | |
111 | /EJECT_SW | 3v @ standby (3.3) | 3.3 | |
112 | 0 | |||
113 | 0 | |||
114 | 0 | |||
115 | 0 | |||
116 | 0 | |||
117 | (0V?) | 0 | ||
118 | ACDC_STBY | 0 | ||
119 | 0 | |||
120 | 0 | |||
121 | 0 | |||
122 | 0 | |||
123 | 0 | |||
124 | 0 | |||
125 | 0 | |||
126 | FAN_PWM | PWM Control for the Fan. | 0 | |
127 | 0 | |||
128 | 0 |
This article is marked for rewrite/restructuring in proper wiki format. You can help PS3 Developer wiki by editing it. |
|