KSW-001

Part number: 1-884-751-31

• Notes:
  • Compatibility with other ps3 models - Can rewire a DSW-001 by matching pins to make it work with out back white, hidden, eject led, and 10th gnd pin on a 300X model full power eject and red and green led functions, A KSW-001 Will not work on a 200X model (dsw-001 slot) not tested on other models.

• 

  Switch board KSW-001 (top view)

• 

  Switch board KSW-001 (PCB top view)

• 

  Switch board KSW-001 (PCB with ribbon cable, bottom view)

• 

  Switch board KSW-001 (PCB bottom view)

• 

  KSW-001 pin out diagram

KSW-001 Pinout

Pin	Name	Connected to		Description
		On Motherboard	On Switch board
1	EJECT_SW	Syscon SW3-30x, pin 83 ?	Eject switch	Sink to ground to activate
2	+5V_EVER	VCC	VCC	5V Standby
3	POW_SW	Syscon SW3-30x, pin 81 ?	Power switch	Sink to ground to activate
4	STBY_LED	Syscon SW3-30x, pin ?	Red led	Connects to right-top corner pin (red gnd) of dual red/green LED over power switch,
5	POW_LED	Syscon SW3-30x, pin ?	Green led	Connects to top right corner pin (green gnd) of dual red/green LED over power switch,
6	GND	GND	GND	Ground

• above top panel view port behind pcb. resistors was not tested.