KSW-001: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
Part number: 1-884-751-31 | = Description = | ||
*Part number: 1-884-751-31 | |||
*[[KSW-001]] is a [[Switch boards|switch board]] compatible with PS3 models: | |||
**[[CECH-30xx]] with [[KTE-001]] motherboard | |||
*Notes: | *Notes: | ||
| Line 12: | Line 15: | ||
</gallery> | </gallery> | ||
= Pinout = | |||
{{KSW-001 pinout}} | {{KSW-001 pinout}} | ||
= How it works = | |||
= Modding = | |||
{{Console Components}}<noinclude>[[Category:Main]]</noinclude> | {{Console Components}}<noinclude>[[Category:Main]]</noinclude> | ||
Latest revision as of 03:40, 20 July 2017
Description[edit | edit source]
- Part number: 1-884-751-31
- KSW-001 is a switch board compatible with PS3 models:
- Notes:
- Compatibility with other ps3 models - Can rewire a DSW-001 by matching pins to make it work with out back white, hidden, eject led, and 10th gnd pin on a 300X model full power eject and red and green led functions, A KSW-001 Will not work on a 200X model (dsw-001 slot) not tested on other models.
Switch board KSW-001 (top view)
Switch board KSW-001 (PCB top view)
Switch board KSW-001 (PCB with ribbon cable, bottom view)
Switch board KSW-001 (PCB bottom view)
KSW-001 pin out diagram
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Pinout[edit | edit source]
| Pin | Name | Connected to | Description | |
|---|---|---|---|---|
| On Motherboard | On Switch board | |||
| 1 | EJECT_SW | Syscon SW3-30x, pin 83 ? | Eject switch  |
Sink to ground to activate |
| 2 | +5V_EVER | VCC | VCC | 5V Standby |
| 3 | POW_SW | Syscon SW3-30x, pin 81 ? | Power switch  |
Sink to ground to activate |
| 4 | STBY_LED | Syscon SW3-30x, pin ? | Red led | Connects to right-top corner pin (red gnd) of dual red/green LED over power switch, |
| 5 | POW_LED | Syscon SW3-30x, pin ? | Green led | Connects to top right corner pin (green gnd) of dual red/green LED over power switch, |
| 6 | GND | GND | GND | Ground |
- above top panel view port behind pcb. resistors was not tested.
How it works[edit | edit source]
Modding[edit | edit source]
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
