DSW-001
Jump to navigation
Jump to search
Description
- Part number: 1-880-056-11
- DSW-001 is a switch board compatible with PS3 models:
- Notes:
- Contour leds - the leds are hidden close to the usb port under the main touch panel. none of the hidden Leds are grounded out but, always receives V+ even when in standby ( red light standby ) reason is unknown and has been found even back on first gen models.
- Compatibility with other ps3 models - this board will work with out back white, hidden, eject led, and 10th gnd pin on a 300X model full power eject and red and green led, A KSW-001 Will not work on a 200X model (dsw-001 slot).
Switch board DSW-001 (top view)
Switch board DSW-001 (bottom view)
Switch board DSW-001 (PCB top view)
Switch board DSW-001 (PCB bottom view)
DSW-001 image diagram (reverse numbering)
.jpg)
.jpg)
.jpg)
.jpg)
Pinout
| Pin | Name | Connected to | Description | |
|---|---|---|---|---|
| On Motherboard | On Switch board | |||
| 1 | RMC_IN ? | Syscon SW2-30x, pin 13 | Testpad | Only This line have a Testpad @ switchboard, seems that it is a service pin. Also connected to a pin of a Service Connectors ? |
| 2 | SW_PWM ? | Syscon SW2-30x, pin 12 | 4x CONTOUR LEDs | Permanently inactive by default. On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED. |
| 3 | ? | Syscon SW2-30x, pin 11 | 2x White leds - | Inner LEDs for EJECT button backlight |
| 2x White leds - | Inner LEDs for POWER button backlight | |||
| 4 | POW_SW | Syscon SW2-30x, pin 110 | Power switch  |
Sink to ground to activate. |
| 5 | EJECT_SW | Syscon SW2-30x, pin 111 | Eject switch  |
Sink to ground to activate. |
| 6 | POW_LED | Syscon SW2-30x, pin 5 | Green led | Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch. |
| 7 | STBY_LED | Syscon SW2-30x, pin 6 | Red led | Connects to top-left corner pin (red gnd) of dual red/green LED over power switch. |
| 8 | BD_LED | BluRay Connector, pin 13 | Blue led | Connects to blue LED over eject switch. |
| 9 | GND | GND | GND | Ground |
| 10 | +5V_EVER | Power Supply Connector (CN101), pin 1 | VCC | 5V Standby |
- above top panel view port behind pcb. resistors was not tested.
How it works
Modding
Enabling contour LEDs in DSW-001 Switch board: Original (french) Google translated (english)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
