SW2-303: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
Line 10: Line 10:
| 1 || || || || 0
| 1 || || || || 0
|-
|-
| 2 || PCLBUZ1? || || ~1V @ standby (0 V?) || 0
| 2 || P141 || || ~1V @ standby (0 V?) || 0
|-
|-
| 3 || PCLBUZ0? || || 3V @ standby (3.15V) || 3.15
| 3 || P140 || || 3V @ standby (3.15V) || 3.15
|-
|-
| 4 || || ||  || 0
| 4 || || ||  || 0
Line 28: Line 28:
| 10 || || || || 0
| 10 || || || || 0
|-
|-
| 11 || || || Connected to Backlit LEDs @SWITCH Board || 0
| 11 || P106 || || Connected to Backlit LEDs @SWITCH Board || 0
|-
|-
| 12 || || || Connected to CONTOUR LEDs @SWITCH Board || 0
| 12 || P105 || || Connected to CONTOUR LEDs @SWITCH Board || 0
|-
|-
| 13 || || || <!--Connected to Pogo pin @SWITCH Board, seems its a service pin.--> || 0
| 13 || P104 || || <!--Connected to Pogo pin @SWITCH Board, seems its a service pin.--> || 0
|-
|-
| 14 || || || || 0
| 14 || || || || 0
Line 42: Line 42:
| 17 || || || || 0
| 17 || || || || 0
|-
|-
| 18 || || || 3v @ standby || 3.0
| 18 || P44 || || 3v @ standby || 3.0
|-
|-
| 19 || || || || 0
| 19 || || || || 0
Line 60: Line 60:
| 26 || || || Connected to standby voltage regulator 463A, pin 3 ||  
| 26 || || || Connected to standby voltage regulator 463A, pin 3 ||  
|-
|-
| 27 || EXCLKS? || || CLK -> 1-2V Amplitude (32.768Khz?) ||  
| 27 || P124 || || CLK -> 1-2V Amplitude (32.768Khz?) ||  
|-
|-
| 28 || XT1? || || CLK -> 1-2V Amplitude (32.768Khz?)  ||  
| 28 || P123 || || CLK -> 1-2V Amplitude (32.768Khz?)  ||  
|-
|-
| 29 || P137 || || 1v @ standby (Connected to pin 8 at Service Connector)  || 2.7
| 29 || P137 || || 1v @ standby (Connected to pin 8 at Service Connector)  || 2.7
|-
|-
| 30 || || || 0.8v @ standby  <!-- oscillator --> || 1.1
| 30 || P122 || || 0.8v @ standby  <!-- oscillator --> || 1.1
|-
|-
| 31 || || || 2.2v @ standby  <!-- oscillator -->  || 0.15
| 31 || P121 || || 2.2v @ standby  <!-- oscillator -->  || 0.15
|-
|-
| 32 || || || || 2.5
| 32 || REGC || || || 2.5
|-
|-
| 33 || GROUND/Vss0 || || || 0
| 33 || GROUND/Vss0 || || || 0
Line 80: Line 80:
| 36 || EVdd0 || || 3v @ standby (3.3) || 3.3
| 36 || EVdd0 || || 3v @ standby (3.3) || 3.3
|-
|-
| 37 || || || 0.2v @ standby || 0
| 37 || P60 || || 0.2v @ standby || 0
|-
|-
| 38 || || || 0.2v @ standby || 0
| 38 || P61 || || 0.2v @ standby || 0
|-
|-
| 39 || || ||  || 0
| 39 || || ||  || 0
Line 88: Line 88:
| 40 || || || || 0
| 40 || || || || 0
|-
|-
| 41 || AC IN? || || 3v @ standby (3.3) || 3.3
| 41 || P31/AC IN? || || 3v @ standby (3.3) || 3.3
|-
|-
| 42 || || || || 0
| 42 || || || || 0
|-
|-
| 43 || DIAG_MODE? || || 3v @ standby  || 3.0
| 43 || P65 || || 3v @ standby  || 3.0
|-
|-
| 44 || || || || 0
| 44 || || || || 0
Line 100: Line 100:
| 46 || || || || 0
| 46 || || || || 0
|-
|-
| 47 || || || 3v @ standby (3.15) || 3.15
| 47 || P76 || || 3v @ standby (3.15) || 3.15
|-
|-
| 48 || || || 3v @ standby (3.15) || 3.15
| 48 || P75 || || 3v @ standby (3.15) || 3.15
|-
|-
| 49 || || || || 0
| 49 || || || || 0
Line 158: Line 158:
| 75 || || || || 0
| 75 || || || || 0
|-
|-
| 76 || || || 3v @ standby (3.15) || 3.15
| 76 || P16 || || 3v @ standby (3.15) || 3.15
|-
|-
| 77 || || || 3v @ standby (3.3) || 3.3
| 77 || P15 || || 3v @ standby (3.3) || 3.3
|-
|-
| 78 || SC_RxD || || || 0
| 78 || SC_RxD || || || 0
Line 168: Line 168:
| 80 || || || || 0
| 80 || || || || 0
|-
|-
| 81 || || || 1v @ standby || 0
| 81 || P11 || || 1v @ standby || 0
|-
|-
| 82 || || || || 0
| 82 || || || || 0
|-
|-
| 83 || || || 2v @ standby || 0
| 83 || P90 || || 2v @ standby || 0
|-
|-
| 84 || || || 3v @ standby || 3.0
| 84 || P91 || || 3v @ standby || 3.0
|-
|-
| 85 || || || || 0
| 85 || || || || 0
Line 200: Line 200:
| 96 || || || || 0
| 96 || || || || 0
|-
|-
| 97 || || || 3v @ standby (3.3) || 3.3
| 97 || P101 || || 3v @ standby (3.3) || 3.3
|-
|-
| 98 || || || || 0
| 98 || || || || 0
Line 206: Line 206:
| 99 || || || || 0
| 99 || || || || 0
|-
|-
| 100 || || || 3v @ standby (3.3) || 3.3
| 100 || P146 || || 3v @ standby (3.3) || 3.3
|-
|-
| 101 || GROUND || || || 0
| 101 || GROUND || || || 0
Line 224: Line 224:
| 108 || || || || 0
| 108 || || || || 0
|-
|-
| 109 || || || 3v @ standby  || 3.0
| 109 || P150 || || 3v @ standby  || 3.0
|-
|-
| 110 || /POW_SW || || 3v @ standby (3.3) || 3.3
| 110 || P27/POW_SW || || 3v @ standby (3.3) || 3.3
|-
|-
| 111 || /EJECT_SW || || 3v @ standby (3.3) || 3.3
| 111 || P26/EJECT_SW || || 3v @ standby (3.3) || 3.3
|-
|-
| 112 || || || || 0
| 112 || || || || 0
Line 240: Line 240:
| 116 || || || || 0
| 116 || || || || 0
|-
|-
| 117 || AVREFP? || || (0V?) || 0
| 117 || P20 || || (0V?) || 0
|-
|-
| 118 || ACDC_STBY || || || 0
| 118 || P130/ACDC_STBY || || || 0
|-
|-
| 119 || || || Connected to standby voltage regulator 348A, pins 2 and 7 ||  
| 119 || P102 || || Connected to standby voltage regulator 348A, pins 2 and 7 ||  
|-
|-
| 120 || || || || 0
| 120 || || || || 0
Line 258: Line 258:
| 125 || || || || 0
| 125 || || || || 0
|-
|-
| 126 || FAN_PWM || || PWM Control for the Fan. || 0
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
|-
|-
| 127 || || || || 0
| 127 || || || || 0

Revision as of 09:51, 8 May 2017

SW2-303 (SysCon)

First to be seen on PS3 Slim CECH-25xx with motherboards: JSD-00x/JTP-00x

Photo of a Syscon 'SW2-303' (QFP Packaging)


QFP Package : 128 pins
pin 1 left bottom at mark, counter clockwise from south (pins 1-38) to east (pins 39-64), north (pins 65-102), west (103-128))


Syscon SW2-303 Unsoldered.JPG

Pinout

Pin # Name Port Description STBY Voltages
1 0
2 P141 ~1V @ standby (0 V?) 0
3 P140 3V @ standby (3.15V) 3.15
4 0
5 POW_LED 0
6 STBY_LED 3v @ standby (3.3V) 3.3
7 0
8 0
9 0
10 0
11 P106 Connected to Backlit LEDs @SWITCH Board 0
12 P105 Connected to CONTOUR LEDs @SWITCH Board 0
13 P104 0
14 0
15 0
16 BUZZER 0
17 0
18 P44 3v @ standby 3.0
19 0
20 0
21 P41 3v @ standby 3.0
22 TOOL0/Debugger Pin? (Connected to Pin 7 @ Service Connector) (0V?) 0
23 0
24 THR_I2C_SDA Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) 3v @ standby (3.15)
25 THR_I2C_SCL Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) 3v @ standby (3.15)
26 Connected to standby voltage regulator 463A, pin 3
27 P124 CLK -> 1-2V Amplitude (32.768Khz?)
28 P123 CLK -> 1-2V Amplitude (32.768Khz?)
29 P137 1v @ standby (Connected to pin 8 at Service Connector) 2.7
30 P122 0.8v @ standby 1.1
31 P121 2.2v @ standby 0.15
32 REGC 2.5
33 GROUND/Vss0 0
34 GROUND/EVss0 0
35 Vdd 3v @ standby (3.3) 3.3
36 EVdd0 3v @ standby (3.3) 3.3
37 P60 0.2v @ standby 0
38 P61 0.2v @ standby 0
39 0
40 0
41 P31/AC IN? 3v @ standby (3.3) 3.3
42 0
43 P65 3v @ standby 3.0
44 0
45 0
46 0
47 P76 3v @ standby (3.15) 3.15
48 P75 3v @ standby (3.15) 3.15
49 0
50 P73 (Connected to pin 3 @ Service Connector) 0
51 0
52 0
53 0
54 0
55 0
56 GROUND/EVss1 0
57 EVdd1 3v @ standby (3.3) 3.3
58 0
59 0
60 0
61 0
62 0
63 0
64 0
65 0
66 0
67 0
68 0
69 0
70 0
71 0
72 0
73 0
74 0
75 0
76 P16 3v @ standby (3.15) 3.15
77 P15 3v @ standby (3.3) 3.3
78 SC_RxD 0
79 SC_TxD 3v @ standby (3.3) 3.3
80 0
81 P11 1v @ standby 0
82 0
83 P90 2v @ standby 0
84 P91 3v @ standby 3.0
85 0
86 0
87 0
88 0
89 0
90 0
91 0
92 0
93 0
94 0
95 0
96 0
97 P101 3v @ standby (3.3) 3.3
98 0
99 0
100 P146 3v @ standby (3.3) 3.3
101 GROUND 0
102 0
103 0
104 0
105 0
106 0
107 0
108 0
109 P150 3v @ standby 3.0
110 P27/POW_SW 3v @ standby (3.3) 3.3
111 P26/EJECT_SW 3v @ standby (3.3) 3.3
112 0
113 0
114 0
115 0
116 0
117 P20 (0V?) 0
118 P130/ACDC_STBY 0
119 P102 Connected to standby voltage regulator 348A, pins 2 and 7
120 0
121 0
122 0
123 0
124 0
125 0
126 P145/FAN_PWM PWM Control for the Fan. 0
127 0
128 0