Protection: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
<div style="float:right">[[File:CECHC FUSE-TH3401.JPG|200px|thumb|left|Fuse (TH3401) as seen on [[CECHCxx]]]]</div>
= Protection devices (IC Link / Thermistors / Fuses) =
= Protection devices (IC Link / Thermistors / Fuses) =


Line 212: Line 214:
== Picture Gallery ==
== Picture Gallery ==
<Gallery>
<Gallery>
File:Cok-002 - fuses.jpg|COK-002 fuses + thermisters - front+back
File:JSD-001-fuses-thermisters.front.jpg|JSD-001 fuses + thermisters - front
File:JSD-001-fuses-thermisters.front.jpg|JSD-001 fuses + thermisters - front
File:JSD-001-fuses-thermisters.back.jpg|JSD-001 fuses + thermisters - back
File:JSD-001-fuses-thermisters.back.jpg|JSD-001 fuses + thermisters - back
File:DYN-001-fuses-thermisters.front.jpg|DYN-001 fuses + thermisters - front
 
File:DYN-001-fuses-thermisters.back.jpg|DYN-001 fuses + thermisters - back
File:DYN-001-fuses-thermistors.front.jpg|DYN-001 fuses + thermistors - front
File:DYN-001-fuses-thermistors.back.jpg|DYN-001 fuses + thermistors - back
 
File:VER-001-fuses-thermisters.front.jpg|VER-001 fuses + thermisters - front
File:VER-001-fuses-thermisters.front.jpg|VER-001 fuses + thermisters - front
File:VER-001-fuses-thermisters.back.jpg|VER-001 fuses + thermisters - back
File:VER-001-fuses-thermisters.back.jpg|VER-001 fuses + thermisters - back
File:MPX-001 12GB bottom-ne.jpg|MPX-001 12GB bottom - ne
File:MPX-001 12GB bottom-nw.jpg|MPX-001 12GB bottom - nw
File:MPX-001 12GB bottom-sw.jpg|MPX-001 12GB bottom - sw
File:MPX-001 12GB bottom-se.jpg|MPX-001 12GB bottom - se
File:MPX-001 12GB top-ne.jpg|MPX-001 12GB top - ne
File:MPX-001 12GB top-nw.jpg|MPX-001 12GB top - nw
File:MPX-001 12GB top-sw.jpg|MPX-001 12GB top - sw
File:MPX-001 12GB top-se.jpg|MPX-001 12GB top - se
</Gallery>
</Gallery>


{{Models}}


[[Category:Protection]]
{{Motherboard Components}}<noinclude>[[Category:Main]]</noinclude>

Latest revision as of 17:42, 5 February 2014

Fuse (TH3401) as seen on CECHCxx

Protection devices (IC Link / Thermistors / Fuses)[edit | edit source]

IC Link[edit | edit source]

Link IC PS3501 (1.2A/72V)[edit | edit source]

PS3501 1-576-282-21 LINK, SQUARE CHIP TYPE IC (1.2A/72V)
used to protect IC3502 (MM1761KHBE) pin 8 (VIN), comes from +3.3V_MISC

Link IC PS6001 (2A/72V)[edit | edit source]

PS6001 1-533-282-21 LINK, IC (2A/72V)
used to protect Q6001 FDQ7238AS (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds), comes from CN6004 pin 1 (+12V_MAIN)


Thermistors[edit | edit source]

Thermistor, Positive[edit | edit source]

COK-001[edit | edit source]

1-802-276-11 TH2401, TH2501

  • TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).
  • TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

COK-002[edit | edit source]

1-802-276-11 TH2401, TH2501

  • TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) OnSemi MC78M05CDTRK (500 mA Positive Voltage Regulators).
  • TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

SEM-001[edit | edit source]

1-805-726-11 TH2401, TH2501

  • TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).
  • TH2501 : is used for CN2501 20P (HDMI) - pin18 +5V of the HDMI output connector and is feeded by +5V_ANA via R2553 0 Ohm.

VER-001[edit | edit source]

1-878-196-21 TH2401

  • TH2401 : is used for CN2401 12P (MultiAV) - pin3 DCout of the MultiAV output connector and is feeded by IC2403 (12V to 5V step down converter) TK73350RTL-G (500 mA Positive Voltage Regulators).

Thermistor, Positive[edit | edit source]

COK-001[edit | edit source]

1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001

  • TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.
  • TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
  • TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB
  • TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
  • TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
  • TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

COK-002[edit | edit source]

1-802-243-11 TH3202, TH3301, TH3302, TH3401, TH3702, TH6001

  • TH3202 : is used for CN3219 15P (Multi_Card_Board) - pin9 +5V_USB, pin10 +5V_USB, pin11 +5V_USB, pin12 +5V_USB.
  • TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
  • TH3302 : is used to protect IC3304 (USB Power) BD6517F pin7 VDD via R3350 0 Ohm. Is feeded by +5V_USB
  • TH3401 : is used for CN3401 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
  • TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
  • TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

SEM-001[edit | edit source]

1-802-243-11 TH3280, TH3301, TH3702, TH6001

  • TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
  • TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
  • TH3702 : is used for CN3701 33P (Wifi Board) - pin 3 +5V_MISC, pin 4 +5V_MISC, pin 5 +5V_MISC
  • TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

VER-001[edit | edit source]

1-878-196-21 TH3280, TH3301, TH6001

  • TH3280 : is used for CN3280 22P (SATA Harddrive power) - pin 14 +5V, pin 15 +5V, pin 16 +5V. Is feeded by +5V_HDD
  • TH3301 : is used to protect IC3303 (USB Power) BD6517F pin7 VDD via R3351 0 Ohm. Is feeded by +5V_USB
  • TH6001 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 3 which outputs for +5V_BD

Thermistor, Positive[edit | edit source]

COK-001[edit | edit source]

1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002

  • TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
  • TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
  • TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
  • TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER
  • TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.

COK-002[edit | edit source]

1-802-277-11 TH3203, TH3204, TH3701, TH4001, TH4002

  • TH3203 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
  • TH3204 : is used for CN3221 60P (BD ATA0) - pin pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
  • TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
  • TH4001 : is used for CN4010 10P (Power/Reset Board) - pin 1 +5V_EVER
  • TH4002 : is used for CN4010 10P (Power/Reset Board) - pin 6 (/eject_sw) via R4073 10K Ohm and CN4010 10P - pin 7 (/power_sw) via R4074 10K Ohm.

SEM-001[edit | edit source]

1-805-762-11 TH3401, TH3402, TH3701, TH4001, TH4002

  • TH3401 : is used for CN3221 60P (BD ATA0) - pin 22 (XIRDY / /SB_ATA0_IORDY) via R3248 4700 Ohm, gets feeded from +3.3V_SB_VDDIO
  • TH3402 : is used for CN3221 60P (BD ATA0) - pin 60 +3.3V_EVER
  • TH3701 : is used for CN3701 33P (Wifi Board) - pin 1 +5V_EVER
  • TH4001 : is used for Power/Reset circuit, feeded by +5V_EVER
  • TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER

VER-001[edit | edit source]

  • TH4002 : is used for Power/Reset circuit, going to IC4002 CXR713120-203GB-TL port E:pad A12 EJECT_SW via R4073 4700 Ohm and going to IC4002 CXR713120-203GB-TL port E:pad B12 /POW_SW via R4074 4700 Ohm, is feeded by +3.3V_EVER
  • TH3201 : Undocumented

Thermistor, Positive[edit | edit source]

COK-001[edit | edit source]

1-802-283-11 TH6002

  • TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

COK-002[edit | edit source]

1-802-283-11 TH6002

  • TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

SEM-001[edit | edit source]

1-802-246-11 TH6002

  • TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

VER-001[edit | edit source]

  • TH6002 : is used to protect Q6010 (BD drive power) SI4943BDY-T1-E3 - pin 1 which outputs for +12V_BD

Fuses[edit | edit source]

Fuse, Chip (3216) (5A/32V)[edit | edit source]

COK-001[edit | edit source]

1-576-679-11 F6001, F6301, F6302, F6303, F6304

  • F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
  • F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
  • F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_EEGS_VDD/DIG_+1.2V1 and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
  • F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC
  • F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER

COK-002[edit | edit source]

1-576-679-11 F6001, F6301, F6302, F6303, F6304

  • F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
  • F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
  • F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO, +1.2V_GX_VDDC and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
  • F6303 : Used to protect Q6308 SI4866DY-T1-E3 (if this fuse fails input regulators of +1.5V_YC_RC_VDDA wont get power). Gets feeded by +1.7V_MISC
  • F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER

SEM-001[edit | edit source]

  • F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
  • F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN
  • F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
  • F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
  • F6304 : Used to protect Q6311 SI4391DY-T1-E3 (if this fuse fails input regulators of +1.2V_BE_VCS wont get power). Gets feeded by +12V_MAIN
  • F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN

VER-001[edit | edit source]

  • F6001 : Used to protect Q6002 FDQ7238AS (if this fuse fails input regulators of +3.3V_BRIDGE, +5V_HDD, +5V_USB and TH6001 wont get power). Gets feeded by CN6004 2P pin1 +12V_MAIN
  • F6002 : Used to protect Q6005 SI489ADY-T1 (if this fuse fails input regulators of +3.3V_MISC wont get power and console shuts down in 2 seconds). Gets feeded by +12V_MAIN
  • F6003 : Undocumented
  • F6301 : Used to protect Q6304 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.8V_RSX_FBVDDQ wont get power).. Gets feeded by +12V_MAIN
  • F6302 : Used to protect Q6305 SI4392DY-T1-E3 (if this fuse fails input regulators of +1.2V_SB_VDDC, +1.5V_YC_RC_VDDA, +1.2V_YC_RC_VDDIO and F6303, +1.7V_MISC wont get power). Gets feeded by +12V_MAIN
  • F6304 : Used to protect Q6301 FDQ7238AS (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +5V_EVER
  • F6305 : Used to protect Q6601 SI4830ADY-T1 (if this fuse fails input regulators of +1.8V_VDD_MEM wont get power). Gets feeded by +12V_MAIN


Picture Gallery[edit | edit source]

  • COK-002 fuses + thermisters - front+back

    COK-002 fuses + thermisters - front+back

  • JSD-001 fuses + thermisters - front

    JSD-001 fuses + thermisters - front

  • JSD-001 fuses + thermisters - back

    JSD-001 fuses + thermisters - back

  • DYN-001 fuses + thermistors - front

    DYN-001 fuses + thermistors - front

  • DYN-001 fuses + thermistors - back

    DYN-001 fuses + thermistors - back

  • VER-001 fuses + thermisters - front

    VER-001 fuses + thermisters - front

  • VER-001 fuses + thermisters - back

    VER-001 fuses + thermisters - back

  • MPX-001 12GB bottom - ne

    MPX-001 12GB bottom - ne

  • MPX-001 12GB bottom - nw

    MPX-001 12GB bottom - nw

  • MPX-001 12GB bottom - sw

    MPX-001 12GB bottom - sw

  • MPX-001 12GB bottom - se

    MPX-001 12GB bottom - se

  • MPX-001 12GB top - ne

    MPX-001 12GB top - ne

  • MPX-001 12GB top - nw

    MPX-001 12GB top - nw

  • MPX-001 12GB top - sw

    MPX-001 12GB top - sw

  • MPX-001 12GB top - se

    MPX-001 12GB top - se


Syscon
CXR713F Series
CELL
90 nm
65 nm
45 nm
RSX
90 nm
65 nm
40 nm
28 nm
CELL RAM
(XDR)
Elpida
Qimonda
Samsung
RSX RAM
(GDDR3 or 5)
Elpida
Infineon & Qimonda
Samsung
Hynix
PS2
Compatibility
EEGS
RDRAM
Bridge
South Bridge
Starship2
Flash
NAND
Samsung
NOR
Macronix
Samsung
Spansion
eMMC
Samsung
Panasonic
BD SATA/PATA
BD Controllers
On BD board
Sony
Renesas SCEI
Integrated
Sony
Renesas SCEI
Others
IDT SCEI
Wireless
Connectors
Other
Diverse Comp.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Protection&oldid=25850"