Loaders

Explaination

Loaders are used for loading other modules.

Commonly found in CoreOS and Flash.

Known loaders

Loader	Location	Type	Remarks
bootldr	Flash	Boot Loader	primary loader from chain of trust
metldr	Flash	Meta Loader	aka asecure_loader. Loads other loaders
appldr	CoreOS	Application Loader	loads userspace [f]selfs e.g. vsh.self, videoplayer_plugin.sprx, disc EBOOT.BINs, NPDRM EBOOT.BINs
isoldr	CoreOS	Isolation Loader	loading isolated SPU modules
lv1ldr	CoreOS	Hypervisor Loader	loads lv1.self (Hypervisor)
lv2ldr	CoreOS	Supervisor Loader	loads lv2_kernel.self (Supervisor kernel)

Loader encapsulation in lv0

version	decrypted SHA1 hash	isoldr	appldr	lv1ldr	lv2ldr	Remarks
3.60	7A051A4A228C5C7256B9DD3ECC0CFABB605490E3					D/L ; contains weird 2nd loaders that could not be decrypted (named [loader name]_2)
3.61	832CE19B420895B7C89D0DD3D346B9B4254F0902
3.65	C9F7F42BFB30A9FB9FF1394D18F8C490FA20E51D
3.66	110CEA044B059AC8E89C52121DD94EB062605180
3.70	B0CE989CEA9994A7424BC64C49B477ACB9759C45
3.72	E6ABA3DBBAB9CCCFA8B9D4C75AF9BC2CD2A470CC
3.73	17E363EC32AE2C35410250FD147500EAB27C7229
3.74	048C7F30C6FEC76029DE7107C6EA825D778464D3
4.00	B1BD5C738EA8B4C5882DF3816802042015E57765
4.01	DB42B9FC98E927536F9BDE68517DC7EF6A3E7630
4.10	ED6B89DE996DA92B670A515342E5BA44C506CCB8
4.11	5A80C633C7679FB24FEC9E603058A65010F1CC59
4.20	69F14D7512177EAE3DB6A00764CB242D1683511C
4.21	DB4E4CF6A795D8AB93200B4ACDA7978028601EDC
4.23	AC7BDA2E7E093D4FDDE801FAFAB42F55B92506C4
4.25	A6DE36E9178C75B3C557E3056C8BAE5A13C83038
4.26	042ACDE3A986B50F8C58450798DD866130EB85EA
4.30	44A048CC7F990A9EE5400695BC0D9EE283BAB02F

Stop Codes

Stop Code	Module	Remark
0x30	isoldr/appldr	Version mismatch (isoldr version differs from version returned by SPU channel 73).
0x16	isoldr	Revoke List Error
0x17	isoldr	Adresses needs to be aligned
0x21	lv1ldr	???
0x27	appldr	SPU arg at 0x3E840
0x20	metldr	header error
0x23	metldr	ECDSA signature failure

0x27

When booting, lv1ldr store its version in this region writing to ch_72.
isoldr asks for the version in two chuncks, if you want to pass version 3.41 (0x0003004100000000)

Note: this version check was recently added, maybe in fw 3.41

//for ch_73_round_0
data0 = 0x00030041;
//for ch_73_round_1
data1 = 0x00000000;

lv1ldr

Used for loading the hypervisor (lv1.self). It also handles some initialization of the ATA and ENCDEC subsystems.

LS Parameters Layout

Address	Usage	Comments
0x34CB0	Unknown	DMA read from ch74 20 times.
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E800	Arguments

lv2ldr

Used to verify and decrypt lv2 selfs (lv2_kernel.self, ps2_emu.self, ps2_gxemu.self, ps2_softemu.self, ps2_netemu.self)

And to install RVK-list.

LS Parameters layout

Address	Usage	Comments
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E800	Arguments
0x3F000	Program revoke list

Arguments

Size	Name	Value
u64	lpar_auth_id	0x1070000002000001
u8	*lv2_in	lv2 self - address in ram
u8	*lv2_out	where to decrypt lv2 - address in ram
u64	field18	-1
u8[40]	res1	Unknown / Not used
u64	field48	1
u8[16]	res2	Unknown / Not used

appldr

Used to verify and decrypt userland program/data segments (system libraries, vsh and its modules, games, edat and sdat files)

LS Parameters layout

Address	Usage	Comments
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E400	EID0
0x3E800	Arguments
0x3EC00	QA-Flag Info	u64 qaflag_exist_flag //If existed, set to 0, otherwise -1 u64 unk0 //always 0 u8[0x50] qa_token u8[0x2A] qa_token_signature u8[0x6] padding
0x3EE00	LV2 Protection Info	u64 hashed memory effective addr u64 hashed memory size u8[0x14] expected_hmac_hash u8[0xC] padding
0x3F000	Program revoke list

Arguments

For authenticate_program_segment, firmware 0.8x

Size	Name	Value
u64	program_auth_id	subject program authority id
u64	lpar_auth_id	subject logical partition authority id
u64	self_header_addr
u64	program_segment_addr
u64	program_segment_index
u64	destination_addr	where to decrypt
u64	capability_addr	capability flags will be placed to this addr
u64	flag
u64	field40	unknown/pad
u64	field48	2 (on modern fws it could be 2 or 3 or 5)

For authenticate_program_segment, firmware 4.7x

Size	Name	Value
u64	subarguments_addr	subarguments effective address
u64	lpar_auth_id	subject logical partition authority id
u64	field48	5 (checked by appldr, if doesnot match -> appldr will be stoped with err code 0x27)

subarguments

Size	Name	Value
u64	program_auth_id?
u64	self_header_addr
?	?	?

isoldr

Used for loading isolated SPU modules.

LS Parameters layout

Address	Usage	Comments
0x3E000	Wait flag	If (flag==0){wait;} // use 0xFF00000000ULL
0x3E400	EID0
0x3E800	Arguments
0x3EC00	QA-Token	If not used set to -1
0x3F000	Program revoke list

Stop Codes

Stop Code	Remark
0x0D	Revocation check failed.
0x0E	Signature check failed.
0x0F	Revoke list verification failed.
0x11	Revoke list verification failed (header).
0x12	SELF segment verification internal error.
0x13	SELF verification failed.
0x16	Revoke list verification failed.
0x17	Isolated module EA is not aligned.
0x1D	SELF segment verification internal error (ELF32 header).
0x25	Auth-ID error?

Arguments

Depending which isolated module you want to load, you would need to pass it different arguments.

Size	Name	spp_verifier
u64	prog_auth_id	0x1050000003000001
u64	lpar_auth_id	0x1070000002000001
u64	*spu_module	SPU - address in ram
u64	*spu_module_arg1	Profile - address in ram
u64	spu_module_arg1_size	sizeof(profile)
u64	*spu_module_arg2	Not used
u64	spu_module_arg2_size	Not used
u8	res1[16]	Unknown
u64	field48	3
u8 res2[16]	Unknown

Size	Name	aim_spu_module
u64	prog_auth_id	0x1050000003000001
u64	lpar_auth_id	0x1070000002000001
u64	*spu_module	SPU - address in ram
u64	*spu_module_arg1	aim_spu_args - address in ram
u64	spu_module_arg1_size	0x80
u64	*spu_module_arg2	eid0 - address in ram
u64	spu_module_arg2_size	sizeof(eid0)
u64	field48	3

union aim_spu_args {
	struct {
		void *buf;           // debug_info buffer address
		u64 buf_size;        // debug_info buffer size
		u32 param;           // 0x01 device type, 0x02 device id, 0x03 pscode, 0x04 psid
	} in;

	struct {
		u8 result[0x10];     // no need to explain...
	} out;
};