CSW-001

Description

• Part number: 1-871-871-21
• CSW-001 is a switch board compatible with PS3 models:
  • CECHAxx, CECHBxx with motherboard COK-001
  • CECHCxx, CECHExx with motherboard COK-002
  • DECR-1400 with motherboard DEB-001

• 

  Switch board CSW-001 (PCB top view)

• 

  Switch board CSW-001 (PCB bottom view)

• 

  CSW-001 1-871-871-11

• 

  Flat Flex Ribbon Cable 10pins (fixed by the ghetto way)

Pinout

CSW-001 Pinout

Pin	Name	Connected to		Description
		On Motherboard	On Switch board
1	GND	GND	GND	Ground
2	SW_PWM	Syscon pad N9	Testpad ?	FREQ. Intended to send a PWM signal to the switch board ?
3	RMC_IN	Syscon pad R10 Service Connector (CN4009) pin 17	Testpad ?. NC	ReMote Control INput The IR receiver component is missing in the Switch board but existed in some PS3 prototypes that was using SIRC protocol and SERV_SIRCS
4	POW_SW	Syscon pad B12	Power Switch
5	EJECT_SW	Syscon pad A12	Eject Switch
6	POW_LED	Syscon pad M7	Green led
7	STBY_LED	Syscon pad N7	Red led
8	BD_LED	BluRay connector (CN3221) pin 50	Blue led
9	GND	GND	GND	Ground
10	+5V_EVER	Power Supply connector (CN6005) pins 4 and 5	VCC	5V Standby

• Eject LED should be connected to BD controller CXD5063AGG-1
• Other signal pins should be connected to Syscon CXR713 Series