Factory Service Mode

From PS4 Developer wiki
Revision as of 00:14, 29 March 2024 by Zecoxao (talk | contribs) (→‎Setting up the network)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

What is it[edit | edit source]

The PlayStation 4 can enter a special "Service Mode". When it does so, the bottom right corner of the screen has a red translucent rectangle with the words "F a c t o r y /Service Mode" inside of the rectangle. This mode is used by Sony for repairing assistance.

Setting up the pendrive[edit | edit source]

The drive label must be named ORBISMANU, the type must be FAT32 and the allocation size must be 32768 bytes (32K)

Setting up the network[edit | edit source]

Ethernet cable with these settings.

PC IP Address       192.168.0.100 
   SubNetwork Mask  255.255.255.0  

PS4 IP Address      192.168.0.1  
    SubNetwork Mask 255.255.255.0
  • Port for the Auth is 10110

What Selfs does it use?[edit | edit source]

See Factory Service Mode Selfs

See also launcher.cfg

What PUPs does it use?[edit | edit source]

See Factory Service Mode PUPs

How to enter it[edit | edit source]

In a similar fashion to the PlayStation 3, one can enter FSM by patching the Syscon EEPROM (unknown values). There also may be a way to enter FSM using USB. There are documented cases of Sony repairing services accidentally leaving PS4 consoles in FSM.

Features[edit | edit source]

Unknown, supposedly more restricted than the PS3 FSM.