Factory Service Mode: Difference between revisions
| Line 17: | Line 17: | ||
SubNetwork Mask 255.255.255.0 | SubNetwork Mask 255.255.255.0 | ||
</pre> | </pre> | ||
* Port for the Auth is 10110 | |||
= What Selfs does it use? = | = What Selfs does it use? = | ||
Latest revision as of 23:14, 28 March 2024
What is it[edit | edit source]
The PlayStation 4 can enter a special "Service Mode". When it does so, the bottom right corner of the screen has a red translucent rectangle with the words "F a c t o r y /Service Mode" inside of the rectangle. This mode is used by Sony for repairing assistance.
Setting up the pendrive[edit | edit source]
The drive label must be named ORBISMANU, the type must be FAT32 and the allocation size must be 32768 bytes (32K)
Setting up the network[edit | edit source]
Ethernet cable with these settings.
PC IP Address 192.168.0.100
SubNetwork Mask 255.255.255.0
PS4 IP Address 192.168.0.1
SubNetwork Mask 255.255.255.0
- Port for the Auth is 10110
What Selfs does it use?[edit | edit source]
See Factory Service Mode Selfs
See also launcher.cfg
What PUPs does it use?[edit | edit source]
How to enter it[edit | edit source]
In a similar fashion to the PlayStation 3, one can enter FSM by patching the Syscon EEPROM (unknown values). There also may be a way to enter FSM using USB. There are documented cases of Sony repairing services accidentally leaving PS4 consoles in FSM.
Features[edit | edit source]
Unknown, supposedly more restricted than the PS3 FSM.
