Qt Resource Container (QRC)

General format

QRC files (Qt Resources Container) are part of the firmware, located inside a QGL folder (Qt Graphics Library) in path: dev_flash/vsh/resource/qgl using names: canyon.qrc, earth.qrc, icons.qrc, icontex.qrc, lines.qrc, raf.qrc, rhm.qrc, and store.qrc

• All them uses zlib compression and the same container, but the zlib compression method and the structure of the container has 2 variations:
  • All .qrc files except icontex.qrc (magic QRCC) - zlib compression is applyed over the whole .qrc file (except his first 8 bytes that are info for the decompression), after decompression the file generated is a QRCF and the internal container structure can be readed (QRCC always contains a QRCF that is the real container)
  • icontex.qrc - (magic QRCF) zlib compression is applyed per-file over each contained file (the container structure can be readed directlly and every one of the files inside the container structure is compressed individually)

In the practise and from the point of view of the system, the QRCC has no interest and is needed to decompress the whole QRCC to be able to read the internal structure of the container and to acess individual files, when a QRCC is decompressed it generates an QRCF file (the real container) but this QRCF has a different internal structure than the QRCF used by icontex.qrc (are variations of the same container with some small differences... althougth both uses the same identifyer QRCF)

• For this reason is not posible to identify them by reading his magic (both are QRCF) but his structure is different, so is needed to use unnofficial names to identify them and to be able to explain his variations here in wiki, the proposed names used in this page are:
  • QRCF_1 (the most common and older... used by all .qrc's except icontext.qrc)
  • QRCF_2 (the less common and newer... used only by icontex.qrc)

• Notes
  • Actually, the correct way to identity the QRCF container is by reading the texts in the "strings table" that are related with the building process and defines his internal structure, but his names are too long to use when talking about them
  • The container used by .QRC files (the 2 variations of QRCF) is the same used by .P3T themes (P3TF) and .RAF animations (RAFO). All them are variations of the same generic container for a total of 4 known/found
  • The contents of QRC files are compatible/generated with/by: Qt framework and OpenGL

QRCC

QRCC (Qt Resources Container Compressed)

QRC file ZLIB Compressed level 9.

• Example from 3.55 rhm.qrc:

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00000000  51 52 43 43 00 00 28 00 78 DA                       QRCC..(.xÚ

Name	Offset	Size	Example	Remark
Magic	0x00	0x04	51 52 43 43	'QRCC'
QRCF decompressed size	0x04	0x04	00 00 28 00	The size of the QRCF file generated when a QRCC is decompressed
compressed QRCF	0x08	varies, up to the end of the QRCC file	78 DA...	QRCF file start offset, compressed with ZLIB

• Notes
  • The first 2 bytes of the compressed QRCF is the ZLIB header, in this example: 0x78DA
  • default/max level 9

QRCF

QRCF (Qt Resources Container Flat?)

Main Header

The header contains an identifyer of the container (magic), his version, and allows to store the "absolute start offset" and "size" of 7 tables (or areas)

When a "not used table" is placed before a "used table"... the start offset of the "not used table" and his size (as zero) are stored in the main header to preserve his position in the structure. The "used table" that comes later starts in the same offset than the previouslly "not used table" (an intuitive way to think in this is imagining are overlapped because starts in the same position but only the one at the top is used)

• The container format is generic (used also by .RAF and .P3T with some variations) so the usage of this tables can vary, in this example there are 3 "not used tables":
  • two of the "not used tables" (both at offset 0x460 with a size of 0) are placed before an used table (also at offset 0x460 but with a size of 0x23A0)
  • the other "not used table" is placed at the end, so there is no need to store his offset

• Example from fw 3.55 rhm.qrc:

Offset(h) 00 01 02 03  04 05 06 07  08 09 0A 0B  0C 0D 0E 0F
00000000  51 52 43 46  00 00 01 10  00 00 00 40  00 00 02 CC  QRCF.......@..%|
00000010  00 00 03 10  00 00 01 2B  00 00 04 40  00 00 00 1B  ..%À......9Ð....
00000020  00 00 04 60  00 00 00 00  00 00 04 60  00 00 00 00  ..9ð......9ð....
00000030  00 00 04 60  00 00 23 A0  00 00 00 00  00 00 00 00  ..9ð..@p........

Name	Offset	Size	Example	Remark
Magic	0x00	0x04	51 52 43 46	'QRCF'
Version	0x04	0x04	00 00 01 10
Tree Table Offset	0x08	0x04	00 00 00 40
Tree Table Size	0x0C	0x04	00 00 02 CC
ID Table Offset	0x10	0x04	00 00 03 10
ID Table Size	0x14	0x04	00 00 01 2B
String Table Offset	0x18	0x04	00 00 04 40
String Table Size	0x1C	0x04	00 00 00 1B
Integer Array Offset	0x20	0x04	00 00 04 60	Overlapped
Integer Array size	0x24	0x04	00 00 00 00	Not used
Float Array Offset	0x28	0x04	00 00 04 60	Overlapped
Float Array Size	0x2C	0x04	00 00 00 00	Not used
File Table Offset	0x30	0x04	00 00 04 60	Overlaps the previous 2 tables
File Table Size	0x34	0x04	00 00 23 A0
Unknown Table Offset	0x38	0x04	00 00 00 00	Not present
Unknown Table Size	0x3C	0x04	00 00 00 00	Not Used

• Notes
  • The sizes doesnt includes the (posible) padding at the end of all tables

Tree Table

Offset (without the 0x40 header in all qrc files) http://666kb.com/i/cib5c7q4y7rpcx9x1.gif

Same on all QRC's till offset 0x70

Offset	Size	Example	Remark
0x00	0x08	00 00 00 00 00 00 00 00	similar all qrc files
0x08	0x08	FF FF FF FF FF FF FF FF	similar all qrc files
0x10	0x04	FF FF FF FF	similar all qrc files
0x14	0x04	00 00 00 1C	similar all qrc files
0x18	0x04	00 00 00 1C	similar all qrc files
0x1C	0x04	00 00 00 04	similar all qrc files
0x20	0x08	00 00 00 00 00 00 00 00	similar all qrc files
0x28	0x08	FF FF FF FF FF FF FF FF	similar all qrc files
0x30	0x04	00 00 00 38	similar all qrc files: start offset Tree Table
0x34	0x04	xx xx xx xx	size body Tree Table
0x38	0x04	00 00 00 0F	similar all qrc files
0x3C	0x04	00 00 00 02	00 00 00 03 on icontex.qrc
0x40	0x04	00 00 00 1C	similar all qrc files
0x44	0x04	FF FF FF FF	similar all qrc files
0x48	0x04	00 00 00 74	00 00 00 84 on icontex.qrc : start offset of the Filename pointer entry inside ID Table
0x4C	0x08	FF FF FF FF FF FF FF FF	similar all qrc files
0x54	0x04	00 00 00 14	similar all qrc files
0x58	0x04	00 00 00 06	similar all qrc files
0x5C	0x04	00 00 00 00	offset of first File Data
0x60	0x04	00 00 01 50	size of first File Data
0x64	0x04	00 00 00 18	similar all qrc files
0x68	0x04	00 00 00 07	similar all qrc files
0x6C	0x04	00 00 00 00	offset of first filename within the ID Table
0x70	0x04	00 00 00 00	on icontex here are additional 16 bytes
0x74	0x04	00 00 00 0F	similar all qrc files
0x78	0x04	00 00 00 02	similar all qrc files
0x7C	0x04	00 00 00 1C	similar all qrc files
0x80	0x04	00 00 00 38	Filename pointer of the first file for the ID Table
0x84	0x04	00 00 00 B0	start offset of the next entry for the Filename pointer within the ID Table

On icontex.qrc there are additional 16 bytes added on offset 0x70 within the Tree Table

Offset	Size	Example	Remark
0x70	0x04	00 00 00 00	on icontex.qrc
0x74	0x04	00 00 00 1B	on icontex.qrc
0x78	0x04	00 00 00 01	on icontex.qrc
0x7C	0x04	00 01 55 D4	on icontex.qrc (size of .dds uncompressed)
0x80	0x04	00 00 00 00	similar all qrc files
0x84	0x04	00 00 00 0F	similar all qrc files
0x88	0x04	00 00 00 02	similar all qrc files
0x8C	0x04	00 00 00 1C	similar all qrc files
0x90	0x04	00 00 00 38	Filename pointer of the first file for the ID Table
0x94	0x04	00 00 00 B0	start offset of the next entry for the Filename pointer within the Tree Table

Filenames List

This area is composed by a consecutive list of string entries that defines the names of the <file>'s inside <file-table> from the .xml file used to create the container

Every <file> inside <file-table> has assigned 2 attributes in the xml used to create the container: "src" (includes full path + file name + file extension), and "id" (only file name), plus the attribute "size" in QRCF_2 that is added by the program that creates the container ("size" is not present in the original .xml but added automatically when the container is created, this only happens in QRCF_2 and themes and is related with the per-file compression)

• For QRCF_1 containers only is stored the "src" (the file "id" is missing althougth can be deduced from the "src")
• For QRCF_2 and P3T themes only is stored the "id" (the file "src" is missing so there is no way to read the original path or file extension from the container)

Code Sample

For QRCF_1 each entry is composed by:

Offset	Length	Example	Name	Notes
0x0	0x4	00000038	Filename Table pointer	Same value than in the Tree Table
0x4	variable	lib/rhm/Clear.fpo	File name	stored in the .xml as "src"
variable	0x1	00	NULL byte

• Notes
  • For QRCF_2 and themes the structure of an entry is the same, but instead of storing: lib/rhm/Clear.fpo (the file "src"), it should store: Clear (the file "id")
  • The end of the table has a padding to align to 0x10 bytes
  • About the name of this area... for QRCF_1 what is stored is the "src" of the file so we can name it "File SRC table" or "File SRC List", but QRCF_2 and themes stores the "id" of the file so we could name it "File ID table" or "File ID List", but later will be needed to move all this explanations of the structure to a new page and include RAF that is a bit unknown by now if it uses some specific names for storage types inside specific tables. By now we can use a generic name for this area that includes all them like "Filenames List" and decide later if is needed to use specific names

XML Descriptors List

This area is composed by a consecutive list of all the tags (elements or attributes) from the xml that was used to create the container. Are stored "from-top-to-bottom" in the exact same order that they was ordered in the xml (althougth it looks in some cases the theme compiler reorders them to his convenience). This list doesnt makes differences of the "directory hierarchy" of the tags neither is specifyed if the tag is an element or an attribute (this parent-child hierarchy is defined in other place of the container by making references to this area by using "byte counters" to locate a tag)

In all the .qrc files (QRCF_1) except icontex.qrc (QRCF_2). The only difference is QRCF_2 adds the "size" to all the <file> elements (added by the container creator, related with the "per-file" compression)

Offset(h) 00 01 02 03  04 05 06 07  08 09 0A 0B  0C 0D 0E 0F
00000440  71 72 63 00  66 69 6C 65  2D 74 61 62  6C 65 00 66  qrc file-table f
00000450  69 6C 65 00  73 72 63 00  69 64 00 00  00 00 00 00  ile src id......

In icontex.qrc only (QRCF_2). This is similar than themes with the difference that QRC uses a <file-table> containing 1 or more <file>, and themes uses a <icontable> containing 1 or more <icon>

Offset(h) 00 01 02 03  04 05 06 07  08 09 0A 0B  0C 0D 0E 0F
00000440  71 72 63 00  66 69 6C 65  2D 74 61 62  6C 65 00 66  qrc file-table f
00000450  69 6C 65 00  73 72 63 00  69 64 00 73  69 7A 65 00  ile src id size.

• Notes:
  • yellow: used bytes
  • red: padding to align to 0x10 bytes
  • The integer values and text strings of some attributes tags from the xml (e.g: "themename=mytheme", or "fontcolor=2") are stored in this area too at the right of his tag, the presence of an integer value displaces the next tag (this only happens in themes and rafs, not in QRC files so is added here as a note but is very important for the structure of the other containers when using "byte counters" to locate the tags)

File Table

The files are concatenated in the same order than in the Tree Table & ID Table

Summary

Table Description

First Element (in root of xml) Points to a Offset within Tree Table which represents a string

Last Element (in root of xml) Points to a Offset within Tree Table which represents a string

Element Pointer Points to a Offset within String Table which represents a string

Previous Element Points to a Offset within Tree Table which represents a string

Next Element Points to a Offset within Tree Table which represents a string

First Element

Last Element

Element Pointer

Attribute Counter Integer value which describe the amount of Attributes for the current processing Element

Parent Points to a Offset within Tree Table which represents a string and describe the Parent Element

Previous Element (also used as a 4 byte long value which points to a Filename within ID Table)

Next Element (also used as a 4 byte long value which points to a Filename within ID Table)

First Entry Points to a Offsset within Tree Table which describe the first file of current processing Element

Last Entry Points to a Offsset within Tree Table which describe the last file of current processing Element

Element Pointer

Typ Descriptor A Integer value which describe the Typ of the Attribute

Offset of Filedata A Integer value, points to a Offset within File Table which describe the Start of a File to read from

Size of Filedata A Integer value which describe the Length of the File to read from File Table

Element Pointer

Typ Descriptor

ID Offset A Integer value which describe the Offset of a Filename within ID Table

                    Tree Table of rhm.qrc                                                                             ID Table of rhm.qrc

 Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F                                         Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
 00000000  00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF  ........ÿÿÿÿÿÿÿÿ                       00000000  00 00 00 38 6C 69 62 2F 72 68 6D 2F 43 6C 65 61  ...8lib/rhm/Clea
 00000010  FF FF FF FF 00 00 00 1C 00 00 00 1C 00 00 00 04  ÿÿÿÿ............                       00000010  72 2E 66 70 6F 00 00 00 00 74 6C 69 62 2F 72 68  r.fpo....tlib/rh
 00000020  00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF  ........ÿÿÿÿÿÿÿÿ                       00000020  6D 2F 43 6C 65 61 72 2E 76 70 6F 00 00 00 00 B0  m/Clear.vpo....°
 00000030  00 00 00 38 00 00 02 90 00 00 00 0F 00 00 00 02  ...8............                       00000030  6C 69 62 2F 72 68 6D 2F 43 6F 70 79 2E 66 70 6F  lib/rhm/Copy.fpo
 00000040  00 00 00 1C FF FF FF FF 00 00 00 74 FF FF FF FF  ....ÿÿÿÿ...tÿÿÿÿ                       00000040  00 00 00 00 EC 6C 69 62 2F 72 68 6D 2F 64 65 66  ....ìlib/rhm/def
 00000050  FF FF FF FF 00 00 00 14 00 00 00 06 00 00 00 00  ÿÿÿÿ............                       00000050  61 75 6C 74 2E 66 70 6F 00 00 00 01 28 6C 69 62  ault.fpo....(lib
 00000060  00 00 01 50 00 00 00 18 00 00 00 07 00 00 00 00  ...P............                       00000060  2F 72 68 6D 2F 64 65 66 61 75 6C 74 2E 76 70 6F  /rhm/default.vpo
 00000070  00 00 00 00 00 00 00 0F 00 00 00 02 00 00 00 1C  ................                       00000070  00 00 00 01 64 6C 69 62 2F 67 6C 75 74 69 6C 73  ....dlib/glutils
 00000080  00 00 00 38 00 00 00 B0 FF FF FF FF FF FF FF FF  ...8...°ÿÿÿÿÿÿÿÿ                       00000080  2F 43 6F 6E 65 46 69 6C 74 65 72 2E 66 70 6F 00  /ConeFilter.fpo.
 00000090  00 00 00 14 00 00 00 06 00 00 01 50 00 00 00 E0  ...........P...à                       00000090  00 00 01 A0 6C 69 62 2F 67 6C 75 74 69 6C 73 2F  ....lib/glutils/
 000000A0  00 00 00 18 00 00 00 07 00 00 00 16 00 00 00 00  ................                       000000A0  43 6F 6E 65 46 69 6C 74 65 72 2E 76 70 6F 00 00  ConeFilter.vpo..
 000000B0  00 00 00 0F 00 00 00 02 00 00 00 1C 00 00 00 74  ...............t                       000000B0  00 01 DC 6C 69 62 2F 67 6C 75 74 69 6C 73 2F 43  ..Ülib/glutils/C
 000000C0  00 00 00 EC FF FF FF FF FF FF FF FF 00 00 00 14  ...ìÿÿÿÿÿÿÿÿ....                       000000C0  6F 6E 65 46 69 6C 74 65 72 53 69 6D 70 6C 65 2E  oneFilterSimple.
 000000D0  00 00 00 06 00 00 02 30 00 00 01 20 00 00 00 18  .......0........                       000000D0  66 70 6F 00 00 00 02 18 6C 69 62 2F 67 6C 75 74  fpo.....lib/glut
 000000E0  00 00 00 07 00 00 00 2C 00 00 00 00 00 00 00 0F  .......,........                       000000E0  69 6C 73 2F 53 63 72 65 65 6E 43 6F 70 79 2E 66  ils/ScreenCopy.f
 000000F0  00 00 00 02 00 00 00 1C 00 00 00 B0 00 00 01 28  ...........°...(                       000000F0  70 6F 00 00 00 02 54 6C 69 62 2F 67 6C 75 74 69  po....Tlib/gluti
 00000100  FF FF FF FF FF FF FF FF 00 00 00 14 00 00 00 06  ÿÿÿÿÿÿÿÿ........                       00000100  6C 73 2F 42 6C 75 72 32 2E 66 70 6F 00 00 00 02  ls/Blur2.fpo....
 00000110  00 00 03 50 00 00 01 F0 00 00 00 18 00 00 00 07  ...P...ð........                       00000110  90 6C 69 62 2F 67 6C 75 74 69 6C 73 2F 42 6C 75  .lib/glutils/Blu
 00000120  00 00 00 41 00 00 00 00 00 00 00 0F 00 00 00 02  ...A............                       00000120  72 32 4D 61 73 6B 2E 66 70 6F                    r2Mask.fpo
 00000130  00 00 00 1C 00 00 00 EC 00 00 01 64 FF FF FF FF  .......ì...dÿÿÿÿ
 00000140  FF FF FF FF 00 00 00 14 00 00 00 06 00 00 05 40  ÿÿÿÿ...........@
 00000150  00 00 08 10 00 00 00 18 00 00 00 07 00 00 00 59  ...............Y
 00000160  00 00 00 00 00 00 00 0F 00 00 00 02 00 00 00 1C  ................
 00000170  00 00 01 28 00 00 01 A0 FF FF FF FF FF FF FF FF  ...(....ÿÿÿÿÿÿÿÿ                                          String Table of rhm.qrc
 00000180  00 00 00 14 00 00 00 06 00 00 0D 50 00 00 05 50  ...........P...P                       Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
 00000190  00 00 00 18 00 00 00 07 00 00 00 71 00 00 00 00  ...........q....                       00000000  71 72 63 00 66 69 6C 65 2D 74 61 62 6C 65 00 66  qrc file-table f
 000001A0  00 00 00 0F 00 00 00 02 00 00 00 1C 00 00 01 64  ...............d                       00000010  69 6C 65 00 73 72 63 00 69 64 00 73 69 7A 65 00  ile src id size.
 000001B0  00 00 01 DC FF FF FF FF FF FF FF FF 00 00 00 14  ...Üÿÿÿÿÿÿÿÿ....
 000001C0  00 00 00 06 00 00 12 A0 00 00 03 D0 00 00 00 18  ...........Ð....
 000001D0  00 00 00 07 00 00 00 90 00 00 00 00 00 00 00 0F  ................
 000001E0  00 00 00 02 00 00 00 1C 00 00 01 A0 00 00 02 18  ................
 000001F0  FF FF FF FF FF FF FF FF 00 00 00 14 00 00 00 06  ÿÿÿÿÿÿÿÿ........
 00000200  00 00 16 70 00 00 01 C0 00 00 00 18 00 00 00 07  ...p...À........
 00000210  00 00 00 AF 00 00 00 00 00 00 00 0F 00 00 00 02  ...¯............
 00000220  00 00 00 1C 00 00 01 DC 00 00 02 54 FF FF FF FF  .......Ü...Tÿÿÿÿ
 00000230  FF FF FF FF 00 00 00 14 00 00 00 06 00 00 18 30  ...............0
 00000240  00 00 03 10 00 00 00 18 00 00 00 07 00 00 00 D4  ...............Ô
 00000250  00 00 00 00 00 00 00 0F 00 00 00 02 00 00 00 1C  ................
 00000260  00 00 02 18 00 00 02 90 FF FF FF FF FF FF FF FF  ........ÿÿÿÿÿÿÿÿ
 00000270  00 00 00 14 00 00 00 06 00 00 1B 40 00 00 04 20  ...........@....
 00000280  00 00 00 18 00 00 00 07 00 00 00 F3 00 00 00 00  ...........ó....
 00000290  00 00 00 0F 00 00 00 02 00 00 00 1C 00 00 02 54  ...............T
 000002A0  FF FF FF FF FF FF FF FF FF FF FF FF 00 00 00 14  ÿÿÿÿÿÿÿÿÿÿÿÿ....
 000002B0  00 00 00 06 00 00 1F 60 00 00 04 40 00 00 00 18  .......`...@....
 000002C0  00 00 00 07 00 00 01 0D 00 00 00 00              ............

Typ Description

Value	Typ	Notes
0x00000006	File	Composed of Offset and Size each 4 bytes long
0x00000007	ID	Composed of Offset 4 bytes long

The Typ File is used to descripe two integer values, the Offset and Size for a File which will be readed from File Table. The Typ ID is used to descripe the Offset of a Filename within the ID Table.

Tools

ZLIB archivers

QRC files are compressed in ZLIB, and has 8 bytes added at the start of the file. To be able to use a generic zlib archiver is needed to remove this 8 bytes (and is needed to add them in the last step when rebuilding the QRC file)

SimplyZip

Windows archiver able to extract and create zlib files. http://www.paehl.de/cms/simplyzip

• Usage:
  • Open the program and click in the tab at top: [External progs] ---> [ZLIB (pack/unpack)]
  • A window opens where you can select the file
  • Choose [Decompress] or [Compress], then click in [Start]

QGL converter

This tool can decompress a QRCC to QRCF and compress a QRCF to QRCC (it crops/generates the first 8 bytes and manages the zlib decompression/compression)

https://raw.github.com/wargio/ps3tools/master/QGL.c (just run make to compile it)

QRC Extractors

After the ZLIB decompression (needed for all .qrc files except icontex.qrc) the contents can be extracted individually using different tools

• Notes
  • Some of the images are inverted vertically (only .dds?)

P3Textractor

Is posible to use a theme extractor to extract the contents from .qrc files, but first is needed to replace the characters / by _ of the text strings inside the Name table with a hexeditor (e.g: the string override/black/ICONS.mnu needs to be replaced by override_black_ICONS.mnu) This patching of the text strings can be automated by selecting the whole Name table in hexeditor and the function "replace string" (replacing the text string / by _ automatically only in the selected area)

P3Textractor manual: http://www.psdevwiki.com/ps3/Themes_(.p3t)#P3Textractor

• Notes
  • P3Textractor renames .dds file extensions to .gim in the extraction process... so is needed to change back the file extensions manually to .dds for further edits in other programs
  • This same trick with P3Textractor can be used with .raf files

Raw extractors

Generic Tiny little extractor

Theses generic tiny little tools extract blindly (they just don t want to stop) & embedded (and so, output bigger files when it s not) files and are means to be tiny and independent. Extremely Heavily based on an MPO splitter by Christian Steinruecken. Formats supported DDS/MNU/JPG/MPO/PNG (and virtually any other by modifying the source code)

http://rghost.net/49340892 (include Code-Compile-Credit. Drag and drop your file into them) & mirror links: http://mir.cr/0R78ED3U

QRC Compilers

There are no compilers for .qrc files, the commonly used method consist in patching settings values in text strings (or to inject the modded files) with a hexeditor over the original .qrc file

This limits the mods to patches than never exceeeds the size of the original data... in the case of patching an area with an smaller patch is recommended to fill the original "trash" data with zeroes

Patching strings in hexeditor

Mostly used with the settings inside .mnu files

First extract the files with some of the extractor tool, open the .mnu files in notepad++ to be able to read the settings in a easy way

Select the string you want to modify and "copy" his name

Open the .qrc file in hexeditor (after ZLIB decompression if needed) and use the search funtion to locate the string you copyed previously

• Notes
  • Most of the settings inside .mnu files are repeated several times inside the .qrc file because are used in several .mnu files... be sure to patch the correct .mnu file by comparing the rest of the data at his side

Injecting files in hexeditor

Similar than patching a text string, but with a bigger chunk of data

Files inside QRC containers

• File formats inside QRC containers: (See Multimedia Formats and Tools page for a general description of DDS, GTF, BMP, TGA, and JPEG image formats)
  • ELF (Executable and Linkable Format) See Specifications here: ELF Header and ELF-64 Object File Format
  • BIN (Binary)
  • MNU ?
  • FPO (Fragment program objects)
  • VPO (Vertex program objects)
  • PATH (Camera path)
  • DUMP ?
  • TXT ?
  • INI ?
  • DDS (Direct Draw Surface)
  • GTF (Graphics Texture Format)
  • BMP (Bitmap)
  • TGA (Targa)
  • JPEG (Joint Photographic Experts Group)

• ps3 standalone visualizer app released by "Q games" (responsibles of XMB design): http://blog.us.playstation.com/2013/08/08/new-ps3-visualizer-app-from-q-games-out-tuesday/ and http://www.ps3hax.net/2013/08/q-games-releases-new-visualizer-music-app-for-ps3-high/

• QRC related modules in dev_flashvsh/modules/:
  • qglbase.sprx <--- generic
  • qgl_gaia_app.sprx <--- earth animation inside music player
  • qgl_canyon_app.sprx <--- abstract animation inside music player
  • Indirectly related: raf.sprx <--- generic animations

lines.qrc

lines.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents						Feature (added, removed or changed)
			ELF	FPO	VPO	MNU	DDS	TGA
1.00~1.02	110.923	FCC5B919D343533737E33C2ED566EF03
1.10~1.32	111.371	36A05C991491A281147B241A1338C833
1.50~1.54	111.177	EFBAF47613D96E620329404AA890A2B9
1.60~1.70	111.108	EB6258CEC5A1448138EC02D6444C4C3D
1.80~1.82	109.685	720DB784E69BF03C26AC38B3F161C49A
1.90	131.246	D7D34772AAE942017993A56AD086E623							Wallpapers ?
1.92~1.94	131.227	15E9DFB14DA89B1887C4C96564545B48
2.00~2.01	131.433	665981A0A66C01A6C96269A24F4765E6							[Colour], [Background] and [Brightness] have been added as options under [Theme Settings].
2.10~2.17	131.602	1BD253021A2B4E3864B026670BF96E89
2.20~2.36	115.785	98DA94D76B0E125A85DF2BBF7423F4E8
2.40~2.43	99.050	80E15C5B1E70799B2B0F0D93B8180B34
2.50~2.60	98.972	9AE4A67090D078055787D195E2E1043E
2.70~2.76	98.633	64966A9E622BCB06B1F0E86D3B32FB01
2.80	98.633	5AEF33A9A6E787CE3126D0CA780DD2DA
3.00~3.01	183.383	94D935914BD2F48519799803897ABED5							XMB icons change colour with the theme depending on the time of day. Default theme changed to an updated version of Original waves theme. (original theme renamed to Classic).
3.10~3.21	183.798	A757DCE0C90559AAFAB296DE6D5A8AE5
3.30	183.980	3CDBDD7ADC3BB39D3C17B90A81EF7015
3.40~3.42	183.874	7981D59C7EF731DD0C23EB2681A79FBA
3.50	183.980	E102D35341DC27F6EE2DC975C0118C1A
3.55~3.56	183.981	A50F1DC98A9EDACBDB7C0B010B369736
3.60~3.66	183.980	D519ECFAC71AB7437AAA6E1C70BDDE4E
3.70~3.74	183.984	961BCCD9CE30D5E579F3ADB157A89EA6
4.00~4.01	185.047	93687AF9491974446D62F40A0E61BA3F
4.10~4.11	185.115	FEED5630296382AE8B7C9F811A12AB80
4.20~4.31	185.115	405F4E3F76CBD7FD2E99AACD7431DB09
4.40~4.55	185.116	D34D7E2A7DE4502E0454FD787A00A35C	2	47	11	69	24	6
4.60~4.89	185.105	261CD31A2516EF85A6D3B584C9BD02C5	2	47	11	69	24	6

icons.qrc & icontex.qrc

icons.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents					Feature (added, removed or changed)
			FPO	VPO	MNU	DDS	BMP
1.00~1.02	1.288.734	451016CFB126C6D050EC5B19ABB93548
1.10	1.307.885	1B265A359BB59CBE8E3348A2F9B288A1
1.11~1.32	1.317.777	D434CE9BC9AA04C0CDF834DAF82D5A3D
1.50~1.54	1.317.505	C0A0FE2D84FB7A68C96A4FB07401286C
1.60~1.70	697.758	44B0B9B26FBF5FC1EB9045E5349EC58A
1.80~1.82	736.754	9877952A1CCB9A032B8706E21DF084E9
1.90	752.563	835647C1B7C921109912DA92EC557E15
1.92~1.94	752.564	7B056E396B5ECBF2B969A71D31C6EB6E
2.00~2.01	30.170	4C5F6FEAC323C9DF834C91171DB617AD						XMB Icons moved to the new container: icontex.qrc to allow Static PlayStation 3 Theme (P3T) support
2.10~2.36	30.318	BAD026CDEA08D3922A2758FC57BC04ED
2.40~2.43	29.711	6F035289BD16E3243C9049F87BF08336
2.50~2.60	29.705	848AEF795AE0A22B95398DC89D294654
2.70~2.80	29.495	8B91CD5744D56A64D26D077CF3DCED3E
3.00~3.21	32.820	EECFD7C3B62ECB2169AEC89F9ABEC3C6
3.30	32.912	3B4BD372A29B2FF36A15A0F6D0CB1482
3.40~3.42	32.229	D33497D781EAAA32A4B98B684C073E7D
3.50~3.74	32.171	97342FFE4E3B427E9C2133C1BB6A3BB4	33	3	22	1	1
4.00~4.01	32.313	653256BA53207780962A33D1E64A7758						Bug ?
4.10~4.89	32.171	97342FFE4E3B427E9C2133C1BB6A3BB4	33	3	22	1	1	Back to 3.50 version

icontex.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents			Feature (added, removed or changed)
			DDS (m)	DDS (n)	DDS (dif)
2.00~2.01	707.152	020BA022EBBC7FA96C77FA01CE351F26	54	54	1	Static PlayStation 3 Theme (P3T) Support
2.10~2.36	740.224	29E7BBBB83E36A7F8E413ABA274BBC33	54	54	1
2.40~2.43	795.968	7F17470EC7ED46AB5582EB76D86F800F	56	56	1
2.50~2.60	908.448	A4F84C8427AA79F9A9CC9664E8D9FABB	62	62	1
2.70~2.76	901.408	9D0D0DB2DB104C661D98E2EF5E1C024E	62	62	1
2.80	903.328	7A48902A0B565931ABB1B01B39BCEE9C	62	62	1
3.00~3.01	1.361.200	3986EF9DBDFA8F134FFFA57D59C45052	No	66	1	Removed the "m" versions, added 4 new icons
3.10~3.30	1.386.352	60EC9CD4B06808C36413D66D0D389035	No	67	1
3.40~3.61	1.426.032	9FBD278929692A82D5102C12922D9B3D	No	69	1	New icon for [Video Editor & Uploader] application
3.65~3.74	1.413.264	A23FF4BA6E2E8C3E7FA1C9F10E3484CB	No	69	1
4.00~4.89	1.431.936	90146D3F374EC92EBED34535E90CD298	No	70	1

rhm.qrc & raf.qrc

rhm.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents		Feature (added, removed or changed)
			FPO	VPO
1.00~1.32	1.205	D1E7281246EC8A46EB6D368BD4B332BD	3	2
1.50~1.94	1.142	80951055E3973ECCC8BF7E41D6E4BFDD	3	2
2.00~2.01	1.139	98305A00173927E5D947027BFE1CA0DE	3	2	Bug ?
2.10~2.60	1.142	80951055E3973ECCC8BF7E41D6E4BFDD	3	2	Back to 1.50 version
2.70~2.80	1.141	3118E99D109DE85724C54E3C15C17129	3	2
3.00~3.74	2.489	12B8D3A7CDFB3CAF66848704027A44E7	8	3	Added glutils library
4.00~4.89	2.487	99F008FE3C2BACB937BFC925004E6E99	8	3

raf.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents			Feature (added, removed or changed)
			BIN	FPO	VPO
2.70~2.80	5.532	79B5E301CB12BB0AC53B39634FD918A8	1	20	2	coldboot.raf Support
3.00~3.01	5.565	833C5E1D22303EA35AADCC17F25F61AC	1	20	2	Dynamic PlayStation 3 Theme (P3T) Support
3.10~3.21	5.572	07BA8A61785C471242740F915056F0F5	1	20	2
3.30	5.542	FA2388076A217DAFD9A1FD123AF4C847	1	20	2
3.40~3.42	5.550	9566444DFE340CAA9B9B58AD026E9775	1	20	2	Bug ??
3.50~3.74	5.542	FA2388076A217DAFD9A1FD123AF4C847	1	20	2	Back to 3.30 version
4.00~4.01	5.479	B7490AB764B7BC0F9B71A4782C0BAAE7	1	20	2
4.10~4.89	5.457	1FCC497E937FDC6CDAD6A1707C9CD187	1	20	2

canyon.qrc & earth.qrc

Music player visualizers

• note1: the other music player visualizer available is a modification of the XMB wave/sparks animation, and is stored inside lines.qrc using specific .MNU settings in path: override/music_1/)

canyon.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents				Feature (added, removed or changed)
			FPO	VPO	MNU	DDS
1.00~1.02	72.726	0F1B5E3CD6057B71BAF18F3154CD5B8C					Music Player Visualizer (abstract)
1.10~1.32	72.912	E2C2A3374AED0964EB33FBB2CD987798
1.50~1.54	72.777	5F68DBE12F25178C3777898CCF442945
1.60~1.70	73.030	084513247EC6C3B6853C8A8DE669FF8C
1.80~1.82	73.464	3F936EDB8865DE2F8895F176496600FB
1.90	73.467	3717F76B98A3EE4C5BFDDC79E746AC53
1.92~1.94	73.459	FEB1A93499BABB48F215580B932E604C
2.00~2.01	73.438	1EAA9921CA2EC20B2B15400F585150E7
2.10~2.36	73.614	7BAAC386D22BEAF59E8818DE8B5D41BF
2.40~2.43	73.897	3F4EC983D33875CCCD3B5A21AD6AB8C2
2.50~2.60	73.884	83FDE07A293C487844306395C3258C82
2.70~2.80	73.847	8A8123CD7FC907C537EFFB346C353F5F
3.00~3.30	73.836	134EEB4B4027256C4F7C5271ED5F1BBA
3.40~3.42	73.794	D346902DC44A5E9B65C28B10D9C98C86
3.50~3.74	73.828	053DA0D0ED6B336E12665D41F0A18387	49	14	348	1
4.00~4.01	73.950	B252D14574F1B72019A1444E68C11639					Bug ?
4.10~4.31	73.840	81335553D8C52C39B84A623FAAC20416					Bugfix fail ?
4.40~4.89	73.828	053DA0D0ED6B336E12665D41F0A18387	49	14	348	1	Back to 3.50 version

earth.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents											Feature (added, removed or changed)
			ELF	BIN	FPO	VPO	MNU	DUMP	PATH	INI	TXT	DDS	JPG
2.00	400.569	0CF5F811709875C7513EB7EF3D6A4093												Music Player Visualizer (earth) beta/disabled ?
2.01	400.582	F12DBB64403808908A0682CF0CEFEF15												beta/disabled ?
2.10~2.17	2.155.425	F652752780B5C3567872A2540C7E9471												A new visualisation in music playback (Earth Visualization) has been added.
2.20~2.36	2.156.458	CE3FE6DDEE6126CA6EE07E65DA82ADA0
2.40~2.43	2.152.811	CA48FE2B62473602808154B132684922
2.50~2.60	2.152.637	3C289F94B5601135DE9A1E288EB0F30D
2.70~2.76	2.144.961	7953F2CF91EDD2BB6409F6DE7B48B704
2.80	2.145.029	EAFDAC5D044796B22606E06B86E85638
3.00~3.01	2.148.260	C6E70369FA95B0CA107989524C30BF6E
3.10~3.21	2.148.378	6CDF7D52C5ADAC9B048E9D0C45A19AA7
3.30	2.148.553	7B09A088BF169AB486FEDB6C569BACFB
3.40~3.42	2.148.711	43475D5E4B7E8FB223061A3BAFFC8213
3.50	2.148.512	0DB0C5118B06F7D3C8B4C73AD7B0E443
3.55~3.56	2.148.509	136A3DFDE7C60A34CFF3D4A7BBDCCDE4
3.60~3.66	2.148.514	AA7A02DFCA99E167DA347933B95B7DF4
3.70~3.74	2.148.514	5CF1F3694ECDBB75A6461FD6C85A5971
4.00~4.01	2.147.749	0A7C4A327CCD63614E55686FBE6FCCBA
4.10~4.11	2.147.272	A05BCDD9504D7111FBD9810D25217D3F
4.20~4.31	2.147.272	30002327D89E49CE2760881444A522C1
4.40~4.89	2.147.218	BEDFE56680ED40807C53E61603C76E1D	1	11	49	16	381	3	33	60	3	2	72

store.qrc

store.qrc

Version (firmware)	Size (bytes)	Hash (MD5)	Contents					Feature (added, removed or changed)
			DDS	FPO	GTF	MNU	VPO
2.50~2.53	195.383	5E7AF90288C53BEBF729FF8182471C7F	3	16	No	6	8	The PlayStation Network Sign-Up and Account Management utilities have been redesigned. ?
2.60	291.798	0E2298E39927AE2C632B7544E99262FD	5	41	1	20	13
2.70~2.80	291.369	301B589E1D330FC6148A9C50F1763A39
3.00~3.21	291.386	B105F15C8C7A4337F80C3AA52469581C
3.30	291.393	20E92F5465AD6FC2AADF7D04BDBA668F
3.40~3.42	291.254	929D93182B08E41ED01AC45E59513DEC						Bug ?
3.50~3.56	291.393	20E92F5465AD6FC2AADF7D04BDBA668F						Back to 3.30 version
3.60~3.74	291.241	63D551B86EC752837E9824A2E4E4FECF
4.00~4.01	291.317	F7322AEC80109A0B79F2691B0049E561
4.10~4.26	291.210	F89887A9CEF9B8ED942DF6D8C5AC313D
4.30~4.31	291.238	BD559BD848D4116EF073B49FF0C2DF4F
4.40~4.89	291.224	5E551FE46DCA11258A29031128E8D998	5	41	1	20	13