REX-00x: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
= REX-001 = | = REX-001 = | ||
Has a 40-pin connector for the laser flat flex cable, just like [[RTX-001]] and [[PPX-001]]. | Has a 40-pin connector for the laser flat flex cable, just like [[RTX-001]] and [[PPX-001]]. | ||
REX-001 (as well as [[RTX-001]]) require heatsinking for Cell's VRM MOSFETs. For this purpose, the metal shields are shaped differently and thermal pads are applied on both, top and bottom, of the PCB at the mosfets. This is needed because these boards use less PCB layers and thus don't have a large enough copper plane in the PCB to sink the heat into. | |||
== Specifications == | == Specifications == | ||
{|class="wikitable" | {|class="wikitable" | ||
Revision as of 07:22, 10 February 2023
REX-001
Has a 40-pin connector for the laser flat flex cable, just like RTX-001 and PPX-001.
REX-001 (as well as RTX-001) require heatsinking for Cell's VRM MOSFETs. For this purpose, the metal shields are shaped differently and thermal pads are applied on both, top and bottom, of the PCB at the mosfets. This is needed because these boards use less PCB layers and thus don't have a large enough copper plane in the PCB to sink the heat into.
Specifications
| Models | CECH-43xxA / CECH-43xxB / CECH-43xxC |
|---|---|
| Part no. / revisions | 1-893-507-11 / -31 |
| Regions | |
| Backwards Compatibility | PS1 Only. No PS2 |
| Flash Storage | |
| Cell/RSX | 45nm/28nm |
| Watts/Max | 80/210 |
| Release |
Pictures
REX-001 eMMC top side
REX-001 NOR top side
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
