Strings:bootldr dump: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 245: | Line 245: | ||
{{ | |||
{{File Formats}}<noinclude>[[Category:Main]]</noinclude> |
Latest revision as of 20:35, 5 February 2014
Boot Loader SE Version 2.7.0 (Build ID: 3517,38879, Build Date: 2009-03-24_23:51:55) Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved. updater bank_indicator lv0_bank0 lv0_bank1 ros0 ros1 [ERROR]: config_ring cmp fail bit %d, actual 0x%02x, expect 0x%02x fX[ERROR]: 0x%08x lv0 not found [ERROR]: 0x%08x lv0 authentication fail [ERROR]: 0x%08x get_eeprom_os_bank_indicator %d [ERROR]: 0x%08x get_eeprom_bootrom_diag fail %d [ERROR]: 0x%08x get_eeprom_boot_fir_config %d [ERROR]: 0x%08x get_eeprom_update_flag %d [ERROR]: 0x%08x get_eeprom_select_net_device %d CP ch4 SB UART [DEBUG]: get livelock version fail %d [DEBUG]: get livelock version %04x is lower than %04x [DEBUG]: set livelock detection mode fail %d [INFO] %s type %d [INFO]: flash format 2 [ERROR]: 0x%08x invalid flash format version %04x, format_version %04x [INFO]: flash format 1_1 [INFO]: flash format 1 [ERROR]: 0x%08x %s: ERROR src < config::sb_rom_base [ERROR]: 0x%08x %s: ERROR SS2_WORK FULL offset(%016llx) [ERROR]: 0x%08x %s: read_sectors_dma fail %d [INFO]: Connecting to Debug Device (%s) [ERROR]: CBE version unknown. [ERROR]: >>> XDR Init: Not Configured <<< [ERROR]: Designated target FB_ADJ is invalid. [ERROR]: Designated XDR DRAM Prog.Width is invalid. [ERROR]: 0x%08x (FATAL) unable to set up memory configuration parameter. [ERROR]: 0x%08x (FATAL) XDR Init not performed due to invalid parameter. [ERROR]: 0x%08x (FATAL) XDR Link not initilized. [INFO]: XDR Link successfully initilized. [INFO]: memory diag (mode %d, %d) [ERROR]: 0x%08x (FATAL) memory diag fail [ERROR]: 0x%08x (FATAL) memory_diag fail. [ERROR]: 0x%08x get_eeprom_bootrom_trace_leve fail %d [ERROR]: 0x%08x get_reference_clock fail [ERROR]: 0x%08x Invalid be_ref_clk %08x or ref_div %08llx [ERROR]: 0x%08x sc_protocol_version %d get_boot_memory_type copy_to_main_memory [INFO]: query_system_power_up_cause failed. [INFO]: query_system_power_up_cause returns successfully. [INFO]: requested_os_context: 0x%02x [INFO]: current_os_context : 0x%02x [INFO]: requested_gr_context: 0x%02x [INFO]: current_gr_context : 0x%02x [INFO]: last_shutdown_cause : 0x%02x [INFO]: wake_source : 0x%08x [INFO]: (0x%08x) sc_config_info::xdr::query_config failed. [INFO]: (0x%08x) is_waking_from_suspend_to_ram_mode() failed [INFO]: b_str: bool(%d) [INFO]: (0x%08x) identify_cbe_version_from_spu_vr() failed [INFO]: CBE process technology id: 0x%08x [INFO]: CBE design level: 0x%08x [ERROR]: 0x%08x available spu not found [ERROR]: 0x%08x invalid spu_memtest areaAddress 0x%08llx, areaSize 0x%08x, dmaSize 0x%08x, isInfinite %d, loopTimes %d, runOnError %d, readRetry %d, spuID %d, flag 0x%08x (%lld) %s (%lld) stop. error=%d 0123456789ABCDEF 0123456789 IOW_DUMP ITC_DUMP %04x PTC is not enabled. PTC_DUMP DUMP_PREFIX UNKNOWN [INFO]: XIO CH0 Summary: [INFO]: Worst TX UI: 0. (DQ: PIN: [INFO]: Worst RX UI: 0. [ERROR]: => dynamically disabled due to poor UI value. [INFO]: XIO CH1 Summary: [INFO]: m_mcp->basic_config.device_capacity: validated [ERROR]: m_mcp->basic_config.device_capacity: illegal value [INFO]: m_mcp->basic_config.min_window: validated [ERROR]: m_mcp->basic_config.min_window: out of range [INFO]: exercise wake-from-str appendant steps [INFO]: SCK to 0.3V and CMD to 1.2V [INFO]: ask syscon to disable SCK_FET [INFO]: SCK to 1.2V [INFO]: complete wake-from-str appendant steps [INFO]: XIO Calibration start [INFO]: Rx Calibration being processed... [INFO]: Tx Calibration being processed... [INFO]: Do post process... [INFO]: Enable PTCal... [INFO]: Enable Scrubbing... [INFO]: Wake from STR [INFO]: >>> XDR Init: OK <<< [ERROR]: >>> XDR Init: NG <<< [ERROR]: Abort XDR Init due to incorrect YRAC PLL Config setting. [INFO]: Store 128 Bytes to each channel [INFO]: ECC OFF for XIO Ch0 [INFO]: ECC ON for XIO Ch0 [INFO]: ECC OFF for XIO Ch1 [INFO]: ECC ON for XIO Ch1 [INFO]: SRAM Parity ON for XIO Ch0 [INFO]: SRAM Parity ON for XIO Ch1 [INFO]: MIC Data Flow is now configured. [INFO]: XIO Ch0 is available. [INFO]: XIO Ch1 is available. MIC_DUMP %016llx XIG314 XIO_DUMP XDR_DUMP %02x invalidate4_iopt_cache fail %d iost_addr is not aligned 4KB %08llx iopt_addr is not aligned 4KB %08llx %s: allocate_iost_entry fail %d %s: invalid page_size %s: ea_addr is not aligned by page_size in byte %s: invalid ea_size < page size in byte %s: iopt_entry_num > %d %s: allocate_iopt_entry fail %d allocate_io_address [ERROR] 0x%08x %s(%d) intr %08x idle [ERROR] 0x%08x %s(%d) start_read_sector %d, stataus %08x [ERROR] 0x%08x %s(%d) kick_dma %d [ERROR] 0x%08x %s(%d) get_dma_status %08x [ERROR] 0x%08x %s(%d) interrupt %08x [ERROR] 0x%08x %s(%d) start_idle %d, stataus %08x [ERROR] 0x%08x %s(%d) idle %d, stataus %08x [ERROR] 0x%08x %s(%d) read_sector %d, stataus %08x read_sectors_dma [ERROR] %s(%d) pio is not contifured is_ss2_interrupt_asserted [ERROR]: 0x%08x %s fail %08x get_dma_status [ERROR]: 0x%08x %s not configured [ERROR]: 0x%08x %s err status %08x is_ebus_interrupt_asserted get_dma_status PX::EBCADMATCH%d %08x PX::EBCACCTRL%d %08x PX::EBCADBS%d %08x %s: sc_tc(0x%04x) == sc_rc(0x%04x) %s: too small payload_size %d, body_len %d %s: too large payload_len %d %s: body_len(%04x) != body_len2(%04x) %s: header checksum %d != %d %s: payload checksum %d != %d %s: too large payload_size %d %s: be_tc(0x%04x) != be_rc(0x%04x) %s: write_init_msg fail %d %s: wait_swbint(0) returns unknown value %d %s: read_cmpl_msg fail %d %s: read_cmpl_msg unknown id %d %s: read_cmpl_msg unknown transaction_id %d %s: read_cmpl_msg unknown communication_tag %d %s: read_stat_msg fail %d %s: write_stat_msg fail %d %s: skip cmpl err %d, receive_id %d, transaction_id %d, communication_tag %d read_cmpl_msg_ver1 write_init_msg_ver1 send_and_receive [WARN]: sc_version nvs fail %d [ERROR]: nv_storage::write block %d, offset %d, size %d fail %d [ERROR]: nv_storage::read block %d, offset %d, size %d fail %d sc_nv_storage error status %d 0123456789abcdef TTTTTTTT !miscompare: addr=%016lx data=%016lx %016lx expect=%016lx %016lx xor=%016lx %016lx match mismatch retry #%d: %s addr=%016lx data=%016lx %016lx expect=%016lx %016lx xor=%016lx %016lx no available LS memory test area will be truncated: [%lp-%lp], required area [%lp-%lp] %d Error(s) 0123456789abcdef 0123456789ABCDEF SPUNAME /home/tetsu/release/2009_03_24_2 .symtab .strtab .shstrtab .text .rodata .ctors .dtors .data .bss .comment .note.spu_name p.1574 __DTOR_LIST__ _Z12verify_equal6v128_tS_ _Z11bufcheck128PvS_jy _sys_vsnprintf snprintf_char sError __divdi3 _Z10tbMemalignjjPv sys_vsnprintf _Z6tbExiti _Z19test_buf_sequencialyyj9eDataTypej __DTOR_END__ _ZN9TestBench3SPU3MFC10dmaCommandEPVKvyjjjjj __umoddi3 _Exit __udivdi3 _ZN9TestBench3SPU3MFC6dmaGetIP6v128_tEEvT_yjjjjj _Z14do_memtest_spuP12MemtestParam __CTOR_LIST__ _start __TT800 sReadRetry __bss_start main _Z10init_TT800j __CTOR_END__ sRunOnError __stack _edata _end exit _Z8tbPrintfPKcz __moddi3 _exit _Z16rand_int32_TT800v
|