Hardware Flashers:NAND pinout

NAND Wiring

Flashers for NAND based consoles (CECHA/COK-001, CECHB/COK-001, CECHC/COK-002, CECHD/unreleased, CECHE/COK-002W, CECHF/unreleased, CECHG/SEM-001) are generaly wired directly to the pins of the NAND (you cannot use the testpoints!), plus ground and Vcc. Alternatively, boardtraces can be used that lead to the NAND pins.

There are 2 NAND used, interleaved at 512byte/sector level, giving it a 1024 byte "interleaved sector". Pages are 2kb on each NAND.

Generic NAND settings for dumping in RAW

Big Block
Raw
Pages per block: 64
blocks: 64

This will result in dumps of 132MB (138,412,032 bytes) per NAND

Which NAND is low/high?

• COK-001 :
  • IC3802 LOW (main componentside with SATA connector, CELL BE, RSX etc. next to Starship2)
  • IC3803 HIGH (backside next to 60-pin BD ATA connector)

• COK-002 + COK-002W :
  • IC3802 LOW (main componentside with SATA connector, CELL BE, RSX etc. between SATA connector and South Bridge)
  • IC3803 HIGH (main componentside with SATA connector, CELL BE, RSX etc. between SATA connector and AV Multi connector)

• SEM-001 :
  • IC3802 LOW (backside)
  • IC3803 HIGH (main componentside with SATA connector, CELL BE, RSX etc.)

NAND Pinout table

Dual NAND connection to Teensy++ 2.0 (NANDway) diagram

Dual NAND connection to Progskeet diagram

Dual NAND connection to Infectus diagram

NAND 360Clip pinout

Progskeet - Single-NAND - 360clip

Progskeet 1.2 - back

Chip/PIN	Description	NANDway	Progskeet 1.0 / 1.1 S-NAND	Progskeet 1.0 / 1.1 SL-NAND	Progskeet 1.2 / 1.21	Infectus	360clip	Description
NAND 0
0/1-6	NC	NC	NC	NC	NC	NC	NC	No Connection
0/7	R/B	PB6	64 / rdy	gp5	P02	U	FRB1	Read/Busy Output
0/8	RE	PB1	69 / oe	gp1	P06	M	RE	Read Enable
0/9	CE	PB0	60 / gp3	gp2	P05(p) CE_A / P03(s) CE_B	N	FCE1	Chip Enable
1/10+11	NC	NC	NC	NC	NC	NC	NC	No Connection
0/12	Vcc	+3.3	+3.3	+3.3		NC	Vcc	Vcc (min 2.7V-max 3.6V / typ 3.3V)
0/13	Vss	GND	GND	GND		NC	GND	VSS - Ground
1/14+15	NC	NC	NC	NC	NC	NC	NC	No Connection
0/16	CLE	PB2	63 / gp0	we	P09	O	CLE	Command Latch Enable
0/17	ALE	PB3	62 / gp1	rdy	P08	P	ALE	Address Latch Enable
0/18	WE	PB5	65 / we	gp0	P07	Q	WE	Write Enable
0/19	WP	PB4	61 / gp2	gp3	P04	T	WP	Write Protect
1/20-28	NC	NC	NC	NC	NC	NC	NC	No Connection
0/29	I/O-0	PF0	79 / dq0	79 / dq0	P34	D0	I/O0
0/30	I/O-1	PF1	80 / dq1	80 / dq1	P35	D1	I/O1
0/31	I/O-2	PF2	81 / dq2	81 / dq2	P36	D2	I/O2
0/32	I/O-3	PF3	82 / dq3	82 / dq3	P37	D3	I/O3
0/33-35	NC	NC	NC	NC	NC	NC	NC	No Connection
0/36	Vss	GND	GND	GND		NC	GND	VSS - Ground
0/37	Vcc	+3.3	+3.3	+3.3		NC	Vcc	Vcc (min 2.7V-max 3.6V / typ 3.3V)
0/38-40	NC	NC	NC	NC	NC	NC	NC	No Connection
0/41	I/O-4	PF4	83 / dq4	83 / dq4	P38	D4	I/O4
0/42	I/O-5	PF5	84 / dq5	84 / dq5	P39	D5	I/O5
0/43	I/O-6	PF6	85 / dq6	85 / dq6	P40	D6	I/O6
0/44	I/O-7	PF7	86 / dq7	86 / dq7	P41	D7	I/O7
0/45-48	NC	NC	NC	NC	NC	NC	NC	No Connection
0/-	NC	NC	NC	NC	NC	NC	PRE	Not used
0/10	NC	NC	NC	NC	NC	NC	FCE2	Not used
0/6	NC	NC	NC	NC	NC	NC	FRB2	Not used
0/-	NC	NC	NC	NC	NC	NC	RST	Not used
NAND 1
1/1-6	NC	NC	NC	NC	NC	NC	NC	No Connection
1/7	R/B	PD6	3 / gp13	a15	P26	A9	FRB1	Read/Busy Output
1/8	RE	PD1	98 / gp15	a19	P30	A15	RE	Read Enable
1/9	CE	PD0	7 / gp9	a18	P29(p) CE_A / P27(s) CE_B	A14	FCE1	Chip Enable
1/10+11	NC	NC	NC	NC	NC	NC	NC	No Connection
1/12	Vcc	+3.3	+3.3	+3.3		NC	Vcc	Vcc (min 2.7V-max 3.6V / typ 3.3V)
1/13	Vss	GND	GND	GND		NC	GND	VSS - Ground
1/14+15	NC	NC	NC	NC	NC	NC	NC	No Connection
1/16	CLE	PD2	4 / gp12	a22	P33	A13	CLE	Command Latch Enable
1/17	ALE	PD3	5 / gp11	a21	P32	A12	ALE	Address Latch Enable
1/18	WE	PD5	2 / gp14	a20	P31	A11	WE	Write Enable
1/19	WP	PD4	6 / gp10	a17	P28	A10	WP	Write Protect
1/20-28	NC	NC	NC	NC	NC	NC	NC	No Connection
1/-	NC	NC	NC	NC	NC	NC	PRE	Not used
1/10	NC	NC	NC	NC	NC	NC	FCE2	Not used
1/6	NC	NC	NC	NC	NC	NC	FRB2	Not used
1/-	NC	NC	NC	NC	NC	NC	RST	Not used
1/29	I/O-0	PC0	90 / dq8	90 / dq8	P42	A0	I/O0
1/30	I/O-1	PC1	91 / dq9	91 / dq9	P43	A1	I/O1
1/31	I/O-2	PC2	92 / dq10	92 / dq10	P44	A2	I/O2
1/32	I/O-3	PC3	93 / dq11	93 / dq11	P45	A3	I/O3
1/33-35	NC	NC	NC	NC	NC	NC	NC	No Connection
1/36	Vss	GND	GND	GND		NC	GND	VSS - Ground
1/37	Vcc	+3.3	+3.3	+3.3		NC	Vcc	Vcc (min 2.7V-max 3.6V / typ 3.3V)
1/38-40	NC	NC	NC	NC	NC	NC	NC	No Connection
1/41	I/O-4	PC4	94 / dq12	94 / dq12	P46	A4	I/O4
1/42	I/O-5	PC5	95 / dq13	95 / dq13	P47	A5	I/O5
1/43	I/O-6	PC6	96 / dq14	96 / dq14	P48	A6	I/O6
1/44	I/O-7	PC7	97 / dq15	97 / dq15	P49	A7	I/O7
1/45-48	NC	NC	NC	NC	NC	NC	NC	No Connection
Board trace / Other
GND	Vss	NC	NC	NC	NC	GND	NC	VSS - Ground
+5VDC	Vcc	NC	NC	NC	NC	5V	NC	Vcc from TH3401 (CECHA+CECHB/COK-001) Vcc from TH3401 (CECHC+CECHE/COK-002) Vcc from TH3280 (CECHG/SEM-001)
TRISTATE	tri	PB7 / PD7	NC	NC	NC	NC	NC	Tristate pad on EBUS Testpoints
Chip/PIN	Description	NANDway	Progskeet 1.0 / 1.1 S-NAND	Progskeet 1.0 / 1.1 SL-NAND	Progskeet 1.2	Infectus	360clip	Description