Hardware Flashers:NAND pinout: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
Line 2: Line 2:
== NAND Wiring ==
== NAND Wiring ==
Flashers for NAND based consoles ([[CECHAxx|CECHA]]/[[COK-00x#COK-001|COK-001]], [[CECHBxx|CECHB]]/[[COK-00x#COK-001|COK-001]], [[CECHCxx|CECHC]]/[[COK-00x#COK-002|COK-002]], [[CECHDxx|CECHD]]/unreleased, [[CECHExx|CECHE]]/[[COK-00x#COK-002W|COK-002W]], [[CECHFxx|CECHF]]/unreleased, [[CECHGxx|CECHG]]/[[SEM-00x|SEM-001]]) are generaly wired directly to the pins of the NAND ('''you cannot use the testpoints!'''), plus ground and Vcc. Alternatively, boardtraces can be used that lead to the NAND pins.
Flashers for NAND based consoles ([[CECHAxx|CECHA]]/[[COK-00x#COK-001|COK-001]], [[CECHBxx|CECHB]]/[[COK-00x#COK-001|COK-001]], [[CECHCxx|CECHC]]/[[COK-00x#COK-002|COK-002]], [[CECHDxx|CECHD]]/unreleased, [[CECHExx|CECHE]]/[[COK-00x#COK-002W|COK-002W]], [[CECHFxx|CECHF]]/unreleased, [[CECHGxx|CECHG]]/[[SEM-00x|SEM-001]]) are generaly wired directly to the pins of the NAND ('''you cannot use the testpoints!'''), plus ground and Vcc. Alternatively, boardtraces can be used that lead to the NAND pins.
There are 2 NAND used, interleaved at 512byte/sector level, giving it a 1024 byte "interleaved sector". Pages are 2kb on each NAND.
Generic NAND settings for dumping in RAW:
Big Block
Raw
Pages per block: 64
blocks: 64
This will result in dumps of 132MB (138,412,032 bytes) per NAND


== Which NAND is low/high? ==
== Which NAND is low/high? ==

Revision as of 06:20, 29 November 2012

NAND Wiring

Flashers for NAND based consoles (CECHA/COK-001, CECHB/COK-001, CECHC/COK-002, CECHD/unreleased, CECHE/COK-002W, CECHF/unreleased, CECHG/SEM-001) are generaly wired directly to the pins of the NAND (you cannot use the testpoints!), plus ground and Vcc. Alternatively, boardtraces can be used that lead to the NAND pins.

There are 2 NAND used, interleaved at 512byte/sector level, giving it a 1024 byte "interleaved sector". Pages are 2kb on each NAND.

Generic NAND settings for dumping in RAW: 

Big Block
Raw
Pages per block: 64
blocks: 64

This will result in dumps of 132MB (138,412,032 bytes) per NAND

Which NAND is low/high?

  • COK-001 :
    • IC3802 LOW (main componentside with SATA connector, CELL BE, RSX etc. next to Starship2)
    • IC3803 HIGH (backside next to 60-pin BD ATA connector)
  • SEM-001 :
    • IC3802 LOW (backside)
    • IC3803 HIGH (main componentside with SATA connector, CELL BE, RSX etc.)


NAND Pinout table

Dual NAND connection to Teensy++ 2.0 (NANDway) diagram

Dual NAND connection to Progskeet diagram

Dual NAND connection to Infectus diagram

NAND 360Clip pinout

Progskeet - Single-NAND - 360clip

Progskeet 1.2 - back
Chip/PIN Description NANDway Progskeet 1.0 / 1.1 S-NAND Progskeet 1.0 / 1.1 SL-NAND Progskeet 1.2 / 1.21 Infectus 360clip Description
NAND 0
0/1-6 NC NC NC NC NC NC NC No Connection
0/7 R/B PB6 64 / rdy gp5 P02 U FRB1 Read/Busy Output
0/8 RE PB1 69 / oe gp1 P06 M RE Read Enable
0/9 CE PB0 60 / gp3 gp2 P05(p) CE_A / P03(s) CE_B N FCE1 Chip Enable
1/10+11 NC NC NC NC NC NC NC No Connection
0/12 Vcc +3.3 +3.3 +3.3 NC Vcc Vcc (min 2.7V-max 3.6V / typ 3.3V)
0/13 Vss GND GND GND NC GND VSS - Ground
1/14+15 NC NC NC NC NC NC NC No Connection
0/16 CLE PB2 63 / gp0 we P09 O CLE Command Latch Enable
0/17 ALE PB3 62 / gp1 rdy P08 P ALE Address Latch Enable
0/18 WE PB5 65 / we gp0 P07 Q WE Write Enable
0/19 WP PB4 61 / gp2 gp3 P04 T WP Write Protect
1/20-28 NC NC NC NC NC NC NC No Connection
0/29 I/O-0 PF0 79 / dq0 79 / dq0 P34 D0 I/O0
0/30 I/O-1 PF1 80 / dq1 80 / dq1 P35 D1 I/O1
0/31 I/O-2 PF2 81 / dq2 81 / dq2 P36 D2 I/O2
0/32 I/O-3 PF3 82 / dq3 82 / dq3 P37 D3 I/O3
0/33-35 NC NC NC NC NC NC NC No Connection
0/36 Vss GND GND GND NC GND VSS - Ground
0/37 Vcc +3.3 +3.3 +3.3 NC Vcc Vcc (min 2.7V-max 3.6V / typ 3.3V)
0/38-40 NC NC NC NC NC NC NC No Connection
0/41 I/O-4 PF4 83 / dq4 83 / dq4 P38 D4 I/O4
0/42 I/O-5 PF5 84 / dq5 84 / dq5 P39 D5 I/O5
0/43 I/O-6 PF6 85 / dq6 85 / dq6 P40 D6 I/O6
0/44 I/O-7 PF7 86 / dq7 86 / dq7 P41 D7 I/O7
0/45-48 NC NC NC NC NC NC NC No Connection
0/- NC NC NC NC NC NC PRE Not used
0/10 NC NC NC NC NC NC FCE2 Not used
0/6 NC NC NC NC NC NC FRB2 Not used
0/- NC NC NC NC NC NC RST Not used
NAND 1
1/1-6 NC NC NC NC NC NC NC No Connection
1/7 R/B PD6 3 / gp13 a15 P26 A9 FRB1 Read/Busy Output
1/8 RE PD1 98 / gp15 a19 P30 A15 RE Read Enable
1/9 CE PD0 7 / gp9 a18 P29(p) CE_A / P27(s) CE_B A14 FCE1 Chip Enable
1/10+11 NC NC NC NC NC NC NC No Connection
1/12 Vcc +3.3 +3.3 +3.3 NC Vcc Vcc (min 2.7V-max 3.6V / typ 3.3V)
1/13 Vss GND GND GND NC GND VSS - Ground
1/14+15 NC NC NC NC NC NC NC No Connection
1/16 CLE PD2 4 / gp12 a22 P33 A13 CLE Command Latch Enable
1/17 ALE PD3 5 / gp11 a21 P32 A12 ALE Address Latch Enable
1/18 WE PD5 2 / gp14 a20 P31 A11 WE Write Enable
1/19 WP PD4 6 / gp10 a17 P28 A10 WP Write Protect
1/20-28 NC NC NC NC NC NC NC No Connection
1/- NC NC NC NC NC NC PRE Not used
1/10 NC NC NC NC NC NC FCE2 Not used
1/6 NC NC NC NC NC NC FRB2 Not used
1/- NC NC NC NC NC NC RST Not used
1/29 I/O-0 PC0 90 / dq8 90 / dq8 P42 A0 I/O0
1/30 I/O-1 PC1 91 / dq9 91 / dq9 P43 A1 I/O1
1/31 I/O-2 PC2 92 / dq10 92 / dq10 P44 A2 I/O2
1/32 I/O-3 PC3 93 / dq11 93 / dq11 P45 A3 I/O3
1/33-35 NC NC NC NC NC NC NC No Connection
1/36 Vss GND GND GND NC GND VSS - Ground
1/37 Vcc +3.3 +3.3 +3.3 NC Vcc Vcc (min 2.7V-max 3.6V / typ 3.3V)
1/38-40 NC NC NC NC NC NC NC No Connection
1/41 I/O-4 PC4 94 / dq12 94 / dq12 P46 A4 I/O4
1/42 I/O-5 PC5 95 / dq13 95 / dq13 P47 A5 I/O5
1/43 I/O-6 PC6 96 / dq14 96 / dq14 P48 A6 I/O6
1/44 I/O-7 PC7 97 / dq15 97 / dq15 P49 A7 I/O7
1/45-48 NC NC NC NC NC NC NC No Connection
Board trace / Other
GND Vss NC NC NC NC GND NC VSS - Ground
+5VDC Vcc NC NC NC NC 5V NC Vcc from TH3401 (CECHA+CECHB/COK-001)
Vcc from TH3401 (CECHC+CECHE/COK-002)
Vcc from TH3280 (CECHG/SEM-001)
TRISTATE tri PB7 / PD7 NC NC NC NC NC Tristate pad on EBUS Testpoints
Chip/PIN Description NANDway Progskeet 1.0 / 1.1 S-NAND Progskeet 1.0 / 1.1 SL-NAND Progskeet 1.2 Infectus 360clip Description


Prerequisition
Hardware flashing
Pin/pad layouts
Downgrading
Old reference
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Hardware_Flashers:NAND_pinout&oldid=16640"