Playstation Update Package (PUP): Difference between revisions
mNo edit summary |
|||
| Line 232: | Line 232: | ||
PROGRESS BAR | PROGRESS BAR | ||
</pre> | </pre> | ||
=== Orientation === | |||
0x8002F21x - (Set Recovery Mode Flag On (cex/dex/decr)) / (Connecting Controller) | |||
0x8002F22x - (Connect Media containing FW equal or higher) | |||
0x8002F23x - (System Partition formating) / (Search Updater) | |||
0x8002F24x - (Formatting) | |||
0x8002F25x - hdd probing | |||
0x8002F26x - region searching | |||
0x8002F27x - preparing partitions | |||
0x8002F28x - Setup Updating Environment | |||
0x8002F29x - | |||
0x8002F2Ax - | |||
0x8002F2Bx - (Turning Off Recovery Mode Flag) | |||
0x8002F2Cx - Search Updater (Formating preparing Update) | |||
0x8002F2Dx - (Formatting - Preparing to Update) | |||
0x8002F2Ex - (Turning On/Off Recovery Mode Flag) | |||
==Firmware .PUP structure== | ==Firmware .PUP structure== | ||
Revision as of 21:31, 6 November 2014
Description
PUP (Playstation Update Package) files are packages which contain the files used to update a PSP or PS3 system. There are 2 different types: patches (PS3PATCH.PUP) and full updates (PS3UPDAT.PUP). Based on the model, there are 4 different release types: Retail/CEX, Shop/SEX, Debug/DEX and Tool/DECR. Within the Retail/CEX there are 2 file versions: 1 is a PUP with a normal file length which also gets released online. The other PUP file version is the same, except it is zero-filled after the normal PUP content to a fixed filelength of 256MB, which gets released on Gamedisks (if gamecreators build their project to a premaster and give it to Sony for signing, they just use a placeholder of a 256MB PS3UPDATE.PUP which contains no firmwaredata at all - it is completely zerofilled. Sony decides the firmware that gets on the disk and for which firmware the 'Gold' code is signed and mastered).
Interactive Display Unit
A plain retail unit, optionally in kiosk enclosure, running Shop/SEX firmware (a Playstation Update Package (PUP) with Promo_flags.txt set accordingly)
Explaination
Demonstration Mode is exclusive to PS3 IDUs. When the console is placed in Demonstration Mode, many of the settings functions on the XMB are locked out, for instance you are unable to delete movies and games, turn off the console in the PS Button menu, and reformatting the hard drive. To perform any firmware update, or install any package files, the PS3 has to be taken out of demo mode. The instructions included with the IDU update disc will walk you through the process of unlocking the console. It is important to always put the console back into Demonstration Mode after any update. If “Playstation 3 Demonstration Mode ver. xxx” is not displayed in the bottom right of the XMB screen, the console is not in Demonstration Mode. To place the console in Demo Mode you can restart the console using the touch sensitive button on the front of the console.
IDU stands for Interactive Display Unit. The Playstation 3 consoles displayed in Walmart stores are different from consumer units; They are unable to play some consumer software and have a built in demonstration mode which requires a password to access the important features. When a Firmware update is being performed, the disk and instructions will read “PS3 IDU v. xxx” along with the date of the update. Note: All interactives must be a IDU console! If it is not: 1) Get with the D5 manager and try to find the store's IDU console, 2) If it can not be found call the Tech Line to order a replacement and report it lost or stolen.
The IDU update disc is used to install the new firmware and package files on the IDU PS3s. Instructions are sent with the IDU disc, providing step by step instructions of how to complete the installation. It is very important to follow the directions as they are written, and to check the date listed on the IDU update disc.
Package files are media files installed onto the Playstation 3 console during a firmware update. The package files include game demos, photos, audio and movie demonstrations, both playable and viewable.As the IDU disks are pressed BDROMs, they comply to Basic Bluray disc authentication procedure, with its content on it as discbound+signed by Sony themselves, it does not error out with 0x80029564 - SCE_NP_DRM_INSTALL_ERROR_CHECK, like those NP retail packages would that are not started from pressed BD or using ODE, even when those are signed by Sony themselves.
Default unlock codes for Shop/SEX
- 1.5x: 5202
8604/ - 1.6x: 7568
- 1.7x: 0506
- 1.8x: 7712
7259/ - 1.9x: 2737
- 2.0x: 0219
- 2.1x: 2464
- 2.2x: 4801
- 2.3x: 6558
- 2.4x: 9015
- 2.5x: 6258
- 2.6x: 8783
- 2.7x: 7164
- 2.8x: 7897
- 3.0x: 2310
- 3.1x: 5081
- 3.2x: 7818
- 3.3x: 3512
- 3.4x: 2998
- 3.5x: 2297
- 3.6x: 1739
- 3.7x: 5138
- 4.1x: 2464
- 4.2x: 4801
- 4.3x: 6558
- 4.4x: 9015
others seen in vsh.self (3.55):
- 1739
- 5138
- 0168
- 8294
Regioning
There is no regioning in the .PUP files, they are the same for all different regions (if you where looking for regioninfo, see here).
The PS3 however gets the ps3-updatelist.txt from different servers, depening on the region of that model (last 2 numbers in the CECHxxXX SKU name).
- Japan, jp (00 > 0x83)
- USA, us (01 > 0x84)
- Europe, eu (04 > 0x85)
- Korea, kr (05 > 0x86)
- United Kingdom, uk (03 > 0x87)
- Mexico, mx (11 > 0x88)
- Australia/New Zealand, au (02 > 0x89)
- South Asia, sa (Asia except China, Japan, Korea and Taiwan) (06 > 0x8A)
- Taiwan, tw (07 > 0x8B)
- Russia, ru (08 > 0x8C)
- China, cn (09 > 0x8D)
- Hong Kong, hk (10 > 0x8D)
- Brasil, br (11 > 0x8F)
for completeness: Reference Tool/DECR : 0x81, Debug/DEX : 0x82 and System Debugger : 0xA0
Retail basic structure of the update URL:
http://d<TLD>01.ps3.update.playstation.net/update/ps3/image/<TLD>/YYYY_MMDD_md5/PS3UPDAT.PUP (TLD=2 letter abbreviation from above region, YYYY_MMDD is release date, MD5 is 32-digits long HASH)
Shop update check URL: http://fshop01.ps3.update.playstation.net/update/ps3/list/shop/ps3-updatelist.txt
Content:
# JP(shop) Dest=83;CompatibleSystemSoftwareVersion=4.5500-; Dest=83;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://djp01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # US(shop) Dest=84;CompatibleSystemSoftwareVersion=4.5500-; Dest=84;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dus01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # EU(shop) Dest=85;CompatibleSystemSoftwareVersion=4.5500-; Dest=85;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://deu01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # KR(shop) Dest=86;CompatibleSystemSoftwareVersion=4.5500-; Dest=86;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dkr01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # UK(shop) Dest=87;CompatibleSystemSoftwareVersion=4.5500-; Dest=87;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://duk01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # MX(shop) Dest=88;CompatibleSystemSoftwareVersion=4.5500-; Dest=88;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dmx01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # AU/NZ(shop) Dest=89;CompatibleSystemSoftwareVersion=4.5500-; Dest=89;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dau01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # SouthAsia(shop) Dest=8A;CompatibleSystemSoftwareVersion=4.5500-; Dest=8A;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dsa01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # TW(shop) Dest=8B;CompatibleSystemSoftwareVersion=4.5500-; Dest=8B;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dtw01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # RU(shop) Dest=8C;CompatibleSystemSoftwareVersion=4.5500-; Dest=8C;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dru01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30; # CN(shop) Dest=8D;ImageVersion=00000000;SystemSoftwareVersion=0.0000;CDN=http://dcn01.ps3.update.playstation.net/update/ps3/image/shop/nodata;CDN_Timeout=30; # BR(shop) Dest=8F;CompatibleSystemSoftwareVersion=4.5500-; Dest=8F;ImageVersion=0000f582;SystemSoftwareVersion=4.5500;CDN=http://dbr01.ps3.update.playstation.net/update/ps3/image/shop/2014_0206_7642ee37fc0562115a544c7b094f8c15/PS3UPDAT.PUP;CDN_Timeout=30;
Shop basic structure of the update URL:
http://d<TLD>01.ps3.update.playstation.net/update/ps3/image/shop/YYYY_MMDD_md5/PS3UPDAT.PUP (TLD=2 letter abbreviation from above region, YYYY_MMDD is release date, MD5 is 22-digits long HASH)
Installation
To install firmware via USB Mass Storage Devices (e.g. USB-stick, Memory Stick, SD-card, Compact Flash with at least 256MB free), place the PS3UPDAT.PUP file in the following folder structure: /PS3/UPDATE/PS3UPDAT.PUP
- The update location for Kiosk is the same as Retail/CEX.
- The update location for disc media (CD, DVD, BD-ROM) is /PS3_UPDATE/PS3UPDAT.PUP
- The update data for Reference Tool (Tool/DECR) is %SCE_PS3_ROOT%\target\updater\ref-tool\PS3UPDAT.PUP.NNN.0xx
- The update data for Debugging Station (Debug/DEX) is %SCE_PS3_ROOT%\target\updater\debugging_station\PS3UPDAT.PUP.NNN.0xx.forDEX.release.yyyymmdd
- For updating with a single firmware PUP, both the Reference Tool (Tool/DECR) and Debugging Station (Debug/DEX) use the same folder structure as Retail/CEX : /PS3/UPDATE/PS3UPDAT.PUP
- For updating with a multiple firmware PUP (2.50 or later), the Reference Tool (Tool/DECR) can use the folder structure : /PS3/UPDATE/SEARCH with a maximum of 2 sublevels deeper (e.g. PS3/UPDATE/SEARCH/ReferenceTool/250/PS3UPDAT.PUP.242.001). A maximum of 20 PUP files (including /PS3/UPDATE/PS3UPDAT.PUP if applicable) will be shown in the firmware list.
- The update location for Arcade is "/dev_hdd0/game/SCEEXE000/ARCDIR/PS3UPDAT.PUP"
- The update location in Factory Service Mode (used for downgrader and remarry) is /PS3UPDAT.PUP
- The update location for QA Debug setting : System Update Debug=ON is /dev_hdd0/updater/ (with subfolders /01/, /02/ ... e.g. /dev_hdd0/updater/01/PS3UPDAT.PUP)
Problem solving / tips
- Don’t use any USB Mass Storage Device with enhanced functions as: encryption, fingerprintreader, U3, pincode etc. (sometimes marketed under names as SCSI Enclosure Services (SES) thus needing drivers and only working under Windows)
- Don’t use USB Mass Storage Devices with a long initialisation time (e.g. some MP3 players)
- Don’t use multipartitioned USB Mass Storage Devices, only use 1 single primary FAT32 partition.
- Make sure they are formatted according to specifications with FAT32 (e.g. HP USB Format Tool – or TOKIWA / Ridgecrop FAT32 formatter)
- If the stick is formatted FAT32 and still not working, consider other stick or use this tool: http://www.pendrivelinux.com/restoring-your-usb-key-partition/
- Most USB Mass Storage Devices that’ll work effortless with PenDrive Linux, will also work with the PS3 (for downgrading, upgrading, storage of your Game dumps and any normal filestorage under the XMB). Those USB Mass Storage Devices are most likely also the ones giving you the least problems under more exotic platforms like PSX/PSone, PS2/PStwo, Xbox/X360, Gamecube/Wii/WiiU etc.
- Make sure no disc is inside the drive otherwise it will try to install that one instead of the one on USB Mass Storage Device!
- Make sure the media is not readonly (e.g. SDcard or USB Stick with readonly tab) if using firmwares when doing one of the following:
- Factory Service Mode reinstallation
- Remarry BDdrive
- RSOD Fix
- or any process that needs to write a log file, in short, write access
- Select via XMB, Settings -> System Update
Update via Internet Update via Storage Media
- Select Update via Storage Media
The following update data was found: Version 3.41-@@SUFFIX@@ Location USB Device
- Select OK
User Agreement <str id="msg_update_eula_1">line 1 </str> ... <str id="msg_update_eula_X">line X </str>
- Select right arrow or left joystick right
Do you accept the user agreement? Do Not Accept Accept
- Select right arrow or left joystick right
Main Features Revised in System Software Version 3.41-@@SUFFIX@@ <str id="msg_updater_10">FEATURE 1 </str> ... <str id="msg_updater_X">FEATURE X </str> For detailed information including limitations of usage, visit the SCE Web site for your region.
- msg_updater_10 - msg_updater_60 tested to work. they appear one after another in the same manner as the EULA.
- Could list each feature as a seperate msg_updater_X
Do not turn off the system during the update. If you do, you may not be able to restart the PS3 system. Once the update is started you cannot go back to the previous version of the system software. CHECKBOX Turn off System Automatically After Update START
- Select start to install
Copying update data to the hard disk... Do not turn off the system.
System Update Installing... Do not turn off the system. After the install operation has completed, the system will automatically restart. PROGRESS BAR
Orientation
0x8002F21x - (Set Recovery Mode Flag On (cex/dex/decr)) / (Connecting Controller) 0x8002F22x - (Connect Media containing FW equal or higher) 0x8002F23x - (System Partition formating) / (Search Updater) 0x8002F24x - (Formatting) 0x8002F25x - hdd probing 0x8002F26x - region searching 0x8002F27x - preparing partitions 0x8002F28x - Setup Updating Environment 0x8002F29x - 0x8002F2Ax - 0x8002F2Bx - (Turning Off Recovery Mode Flag) 0x8002F2Cx - Search Updater (Formating preparing Update) 0x8002F2Dx - (Formatting - Preparing to Update) 0x8002F2Ex - (Turning On/Off Recovery Mode Flag)
Firmware .PUP structure
The HMAC key used to verify the packages has been released. Look around for "pup-hmac"
Header
| Offset | Length | Type | Information |
|---|---|---|---|
| 0x0 | 0x8 | unsigned long | Magic |
| 0x8 | 0x8 | unsigned long | Package Version |
| 0x10 | 0x8 | unsigned long | Image Version |
| 0x18 | 0x8 | unsigned long | File Count |
| 0x20 | 0x8 | unsigned long | Header Length |
| 0x28 | 0x8 | unsigned long | File Length |
| 0x30 | 0x20 * File Count | File Table | File Table |
| 0x30 + (0x20 * File Count) | 0x20 * File Count | Hash Table | Hash Table |
| 0x30 + (0x40 * File Count) | 0x14 | bytes | Header Hash |
| 0x44 + (0x40 * File Count) | 0xC | bytes | Unknown |
File Table
The file table consists of a number of file entries determined by File Count, with the format below:
| Offset | Length | Type | Information |
|---|---|---|---|
| 0x0 | 0x8 | unsigned long | Entry ID |
| 0x8 | 0x8 | unsigned long | Data Offset |
| 0x10 | 0x8 | unsigned long | Data Length |
| 0x18 | 0x8 | unsigned long | Unknown |
Filename IDs
| File Entry ID | Filename |
|---|---|
| 0x100 | version.txt (aka: ps3version.txt) |
| 0x101 | license.xml (aka: resource.txt? ) |
| 0x102 | promo_flags.txt (only on Template:Shop) (aka: shop.txt?) |
| 0x103 | update_flags.txt |
| 0x104 | patch_build.txt |
| 0x200 | ps3swu.self |
| 0x201 | vsh.tar / font_resource.tar |
| 0x202 | dots.txt |
| 0x203 | patch_data.pkg |
| 0x300 | update_files.tar |
| 0x501 | spkg_hdr.tar (added since FW 3.56) |
| 0x601 | ps3swu2.self (added since FW 3.56) |
Hash Table
The hash table contains a hash entry for every file inside the PUP.
The hash entry format is:
| Offset | Length | Type | Information |
|---|---|---|---|
| 0x0 | 0x8 | unsigned long | File Entry ID |
| 0x8 | 0x14 | bytes | HMAC-SHA1 hash |
| 0x1C | 0x4 | unsigned int | Unknown |
Files in tree example
Here are two examples of the files stored in a PUP.
3.55
PSUPDATE.PUP ├── dots.txt ├── license.txt ├── ps3swu.self ├── update_files.tar │ ├── BDIT_FIRMWARE_PACKAGE.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_301R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_302R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_303R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_304R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_306R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BDPT_FIRMWARE_PACKAGE_308R.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── BLUETOOTH_FIRMWARE.pkg │ │ ├── content │ │ │ ├── RC29_firmware_footer.dfu │ │ │ ├── usb8780-5.0.1-A1-A2.dfu │ │ │ └── usb8781-20.0.12.0.dfu │ │ ├── info0 │ │ └── info1 │ ├── CORE_OS_PACKAGE.pkg │ │ ├── aim_spu_module.self │ │ ├── appldr │ │ ├── creserved_0 │ │ ├── default.spp │ │ ├── emer_init.self │ │ ├── eurus_fw.bin │ │ ├── hdd_copy.self │ │ ├── isoldr │ │ ├── lv0 │ │ ├── lv1ldr │ │ ├── lv1.self │ │ ├── lv2_kernel.self │ │ ├── lv2ldr │ │ ├── manu_info_spu_module.self │ │ ├── mc_iso_spu_module.self │ │ ├── me_iso_spu_module.self │ │ ├── sb_iso_spu_module.self │ │ ├── sc_iso.self │ │ ├── sdk_version │ │ ├── spp_verifier.self │ │ ├── spu_pkg_rvk_verifier.self │ │ ├── spu_token_processor.self │ │ ├── spu_utoken_processor.self │ │ └── sv_iso_spu_module.self │ ├── dev_flash_XXX.tar.aa.DATE/TIME │ ├── dev_flash3_XXX.tar.aa.DATE/TIME │ ├── MULTI_CARD_FIRMWARE.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── RL_FOR_PACKAGE.img │ ├── RL_FOR_PROGRAM.img │ ├── SYS_CON_FIRMWARE_01000006.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01010303.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01020302 │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01030302.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01040402.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01050002.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_01050101.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ ├── SYS_CON_FIRMWARE_S1_00010002083E0832.pkg │ │ ├── content │ │ ├── info0 │ │ └── info1 │ └── UPL.xml.pkg │ ├── content │ ├── info0 │ └── info1 ├── update_files.tar ├── update_flags.txt ├── version.txt └── vsh.tar
For a comparison between Retail and Debug firmware : 3.55 firmware
3.60 - 4.00
PSUPDATE.PUP
├── dots.txt
├── license.xml
├── ps3swu2.self
├── ps3swu.self
├── spkg_hdr.tar
│ ├── BDIT_FIRMWARE_PACKAGE.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_301R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_302R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_303R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_304R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_306R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_308R.pkg.spkg_hdr.1
│ ├── BDPT_FIRMWARE_PACKAGE_310R.pkg.spkg_hdr.1
│ ├── BLUETOOTH_FIRMWARE.pkg.spkg_hdr.1
│ ├── CORE_OS_PACKAGE.pkg.spkg_hdr.1
│ ├── dev_flash_XXX.tar.aa.DATE/TIME.spkg_hdr.1
│ ├── dev_flash3_XXX.tar.aa.DATE/TIME.spkg_hdr.1
│ ├── MULTI_CARD_FIRMWARE.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01000006.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01010303.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01020302.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01030302.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01040402.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01050002.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_01050101.pkg.spkg_hdr.1
│ ├── SYS_CON_FIRMWARE_S1_00010002083E0832.pkg.spkg_hdr.1
│ └── UPL.xml.pkg.spkg_hdr.1
├── update_files.tar
│ ├── BDIT_FIRMWARE_PACKAGE.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_301R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_302R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_303R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_304R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_306R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_308R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BDPT_FIRMWARE_PACKAGE_310R.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── BLUETOOTH_FIRMWARE.pkg
│ │ ├── content
│ │ │ ├── RC29_firmware_footer.dfu
│ │ │ ├── usb8780-5.0.1-A1-A2.dfu
│ │ │ └── usb8781-20.0.12.0.dfu
│ │ ├── info0
│ │ └── info1
│ ├── CORE_OS_PACKAGE.pkg
│ │ ├── aim_spu_module.self
│ │ ├── creserved_0
│ │ ├── default.spp
│ │ ├── emer_init.self
│ │ ├── eurus_fw.bin
│ │ ├── hdd_copy.self
│ │ ├── lv0
│ │ │ ├── appldr
│ │ │ ├── isoldr
│ │ │ ├── lv1ldr
│ │ │ └── lv2ldr
│ │ ├── lv0.2
│ │ ├── lv1.self
│ │ ├── lv2_kernel.self
│ │ ├── manu_info_spu_module.self
│ │ ├── mc_iso_spu_module.self
│ │ ├── me_iso_for_ps2emu.self (3.70+)
│ │ ├── me_iso_spu_module.self
│ │ ├── pkg.srvk
│ │ ├── prog.srvk
│ │ ├── sb_iso_spu_module.self
│ │ ├── sc_iso.self
│ │ ├── sdk_version
│ │ ├── spp_verifier.self
│ │ ├── spu_pkg_rvk_verifier.self
│ │ ├── spu_token_processor.self
│ │ ├── spu_utoken_processor.self
│ │ ├── sv_iso_for_ps2emu.self (3.70+)
│ │ └── sv_iso_spu_module.self
│ ├── dev_flash_XXX.tar.aa.DATE/TIME
│ ├── dev_flash3_XXX.tar.aa.DATE/TIME
│ ├── MULTI_CARD_FIRMWARE.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── RL_FOR_PACKAGE.img
│ ├── RL_FOR_PROGRAM.img
│ ├── SYS_CON_FIRMWARE_01000006.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01010303.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01020302
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01030302.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01040402.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01050002.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_01050101.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ ├── SYS_CON_FIRMWARE_S1_00010002083E0832.pkg
│ │ ├── content
│ │ ├── info0
│ │ └── info1
│ └── UPL.xml.pkg
│ ├── content
│ ├── info0
│ └── info1
├── update_flags.txt
├── version.txt
└── vsh.tar
└── a
Content of different versions
The following information is a copy/paste from the output of KaKaRoTo's pup.c tool. This is an old build, which does not support 3.56/3.60 and higher added entryid's x501 & 0x601 (which because of that are named Unknown entry id).
File Structure
HMAC Key
REDACTED
Header
typedef struct {
uint64_t magic;
uint64_t package_version;
uint64_t image_version;
uint64_t file_count;
uint64_t header_length;
uint64_t data_length;
} PUPHeader;
File Entry
typedef struct {
uint64_t entry_id;
uint64_t data_offset;
uint64_t data_length;
uint8_t padding[8];
} PUPFileEntry;
Hash Entry
typedef struct {
uint64_t entry_id;
uint8_t hash[20];
uint8_t padding[4];
} PUPHashEntry;
Footer
typedef struct
{
uint8_t hash[20];
uint8_t padding[12];
} PUPFooter;
Entry Id
typedef struct {
uint64_t id;
const char *filename;
} PUPEntryID;
PUPEntryID entries
static const PUPEntryID entries[] = {
{0x100, "version.txt"},
{0x101, "license.xml"},
{0x102, "promo_flags.txt"},
{0x103, "update_flags.txt"},
{0x104, "patch_build.txt"},
{0x200, "ps3swu.self"},
{0x201, "vsh.tar"},
{0x202, "dots.txt"},
{0x203, "patch_data.pkg"},
{0x300, "update_files.tar"},
{0x501, "spkg_hdr.tar"},
{0x601, "ps3swu2.self"},
{0, NULL}
};
Contents
| Entry Id | Filename |
|---|---|
| 0x100 | version.txt |
| 0x101 | license.xml |
| 0x102 | promo_flags.txt |
| 0x103 | update_flags.txt |
| 0x104 | patch_build.txt |
| 0x200 | ps3swu.self |
| 0x201 | vsh.tar |
| 0x202 | dots.txt |
| 0x203 | patch_data.pkg |
| 0x300 | update_files.tar |
| 0x501 | spkg_hdr.tar |
| 0x601 | ps3swu2.self |
