Internal
Jump to navigation
Jump to search
Internal Pads
At this moment it is not yet documented what use the pads have (e.g. Service Connectors, SPI, I2C, JTAG, PCIe etc.)
pads 1 (GbLAN)
GbLAN MDIO
| Pin | Name | Description |
|---|---|---|
| 1 | Vcc | Internal +5V |
| 2 | Vcc | Internal +5V |
| 3 | Vcc | Internal +5V |
| 4 | Vcc | Internal +5V |
| 5 | ||
| 6 | ||
| 7 | Gnd | Internal ground |
| 8 | ||
| 9 | Gnd | Internal ground |
| 10 | ||
| 11 | Gnd | Internal ground |
| 12 | ||
| 13 | Gnd | Internal ground |
| 14 | Gnd | Internal ground |
pads 2 (MediaCon)
MediaCon debug (No activity was detected so far. It looks to be disabled / turned off)
| Pin | Name | Description |
|---|---|---|
| 1 | ||
| 2 | Gnd | Internal ground |
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 7 | ||
| 8 | Gnd | Internal ground |
| 9 | ||
| 10 | Gnd | Internal ground |
| 11 | 3.3V when console is started | |
| 12 | ||
| 13 | ||
| 14 | ||
| 15 | ||
| 16 | ||
| 17 | Gnd | Internal ground |
| 18 | ||
| 19 | Gnd | Internal ground |
| 20 | Vcc | +3.3V_STBY power (always on, including the deep standby) |
pads 3 (A01-C0L)
| Pin | Name | Description |
|---|---|---|
| 1 | ||
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | Gnd | Internal ground |
| 7 | I2C | I2C bus (100 kHz clock) |
| 8 | Gnd | Internal ground |
| 9 | ||
| 10 | ||
| 11 | ||
| 12 | ||
| 13 | Gnd | Internal ground |
| 14 | ||
| 15 | ||
| 16 | ||
| 17 | Gnd | Internal ground |
| 18 | ||
| 19 | ||
| 20 | ||
| 21 | ||
| 22 | Gnd | Internal ground |
| 23 | ||
| 24 | ||
| 25 | Gnd | Internal ground |
| 26 | ||
| 27 | ||
| 28 | ||
| 29 | ||
| 30 |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
