Internal

From PS4 Developer wiki
Jump to navigation Jump to search

Internal Pads[edit | edit source]

It is not documented yet what use the pads have (e.g. Service Connectors, SPI, I2C, JTAG, PCIe etc.)

pads 1 (GbLAN)[edit | edit source]

CUH-10xxA SAA-001 pads1/14 pins - img1

CUH-10xxA SAA-001 pads1/14 pins - img1

GbLAN MDIO

Pin Name Description
1 Vcc Internal +5V
2 Vcc Internal +5V
3 Vcc Internal +5V
4 Vcc Internal +5V
5
6
7 Gnd Internal ground
8
9 Gnd Internal ground
10
11 Gnd Internal ground
12
13 Gnd Internal ground
14 Gnd Internal ground

pads 2 (Southbridge)[edit | edit source]

CUH-10xxA SAA-001 pads2/20 pins - img1

CUH-10xxA SAA-001 pads2/20 pins - img2

Southbridge debug (No activity was detected so far. It looks to be disabled / turned off)

Pin Name Description
1
2 Gnd Internal ground
3
4
5
6
7
8 Gnd Internal ground
9
10 Gnd Internal ground
11 3.3V when console is started
12
13
14
15
16
17 Gnd Internal ground
18
19 Gnd Internal ground
20 Vcc +3.3V_STBY power (always on, including the deep standby)

pads 3 (A01-COL)[edit | edit source]

CUH-10xxA SAA-001 pads3/30 pins - img1

CUH-10xxA SAA-001 pads3/30 pins - img2

A01-COL

Pin Name Description
1
2
3
4
5
6 Gnd Internal ground
7 I2C I2C bus (100 kHz clock)
8 Gnd Internal ground
9
10
11
12
13 Gnd Internal ground
14
15
16
17 Gnd Internal ground
18
19
20
21
22 Gnd Internal ground
23
24
25 Gnd Internal ground
26
27
28
29
30

UART[edit | edit source]

UART0 Console - Southbridge UART, as seen on SAA-001 (same layout on SAA-K23, SAB-K02 and SAB-001)

Same layout is used for SAA-K23, SAB-K02 / SAA-001, SAB-001 (pads are present on SAC-001 too, but layout slightly differs)

3.3V CMOS TTL - 115200, n, 8.1

UART0 Console[edit | edit source]

Pin Name Description
GND Ground
U0C_TX UART0 Console Transmit
U0C_RX UART0 Console Receive

Note: You have to enable debug logs as by default the output is zeroed out by "spaces" on CEX consoles. You can enable UART0 logs by patching Serial Flash Non Volatile Storage. You can also use UART Enabler kernel plugin by SiSTRo.

Southbridge UART[edit | edit source]

Pin Name Description
GND Ground
TX Southbridge UART Transmit
RX Southbridge UART Receive

Note: quite similar to PS3 Syscon UART