MX25L1006E: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 8: | Line 8: | ||
Current photos are a but too grainy, but there are 2 of these on the board. One near the SATA on the back of the board (colored blue @ ifixit) and one near the front USB. | Current photos are a but too grainy, but there are 2 of these on the board. One near the SATA on the back of the board (colored blue @ ifixit) and one near the front USB. | ||
=== Pinout === | |||
<div style="float:right">[[File:MX25L1006E Pinout.png|200px|thumb|left|MX25L1006E Pinout]]</div> | |||
{| border="1" cellspacing="0" cellpadding="5" border="#999" class="wikitable" style="border:1px solid #999; border-collapse: collapse;" | |||
|- bgcolor="#cccccc" | |||
! Pin !! 1x I/O !! 2x I/O !! Description | |||
|- | |||
| 1 || CS# || CS# || Chip Select | |||
|- | |||
| 2 || SO || SIO1 || Serial Data Output (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) | |||
|- | |||
| 3 || WP# || WP# || Write Protection: connect to GND | |||
|- | |||
| 4 || GND || GND || Ground | |||
|- | |||
| 5 || SI || SIO0 || Serial Data Input (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) | |||
|- | |||
| 6 || SCLK || SCLK || Clock Input | |||
|- | |||
| 7 || HOLD# || HOLD# || Hold, to pause the device without deselecting the device | |||
|- | |||
| 8 || VCC || VCCS || +3V DC Power Supply | |||
|- | |||
|} | |||
{{Motherboard Components}} | {{Motherboard Components}} | ||
<noinclude>[[Category:Main]]</noinclude> | <noinclude>[[Category:Main]]</noinclude> | ||
Revision as of 14:38, 19 November 2013
Macronix MX25L1006E
3V 1M-BIT [x 1/x 2] CMOS SERIAL FLASH
http://postar.sino-star.com/public/uploads/20120412174638_676.pdf
Current photos are a but too grainy, but there are 2 of these on the board. One near the SATA on the back of the board (colored blue @ ifixit) and one near the front USB.
Pinout
| Pin | 1x I/O | 2x I/O | Description |
|---|---|---|---|
| 1 | CS# | CS# | Chip Select |
| 2 | SO | SIO1 | Serial Data Output (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) |
| 3 | WP# | WP# | Write Protection: connect to GND |
| 4 | GND | GND | Ground |
| 5 | SI | SIO0 | Serial Data Input (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) |
| 6 | SCLK | SCLK | Clock Input |
| 7 | HOLD# | HOLD# | Hold, to pause the device without deselecting the device |
| 8 | VCC | VCCS | +3V DC Power Supply |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
