25X10CLYA1
(Redirected from W25X10CL)
Jump to navigation
Jump to search
Winbond 25X10CLYA1[edit | edit source]
sometimes used as alternative for the Macronix MX25L1006E
3V 1M-BIT [x 1/x 2] CMOS SERIAL FLASH
http://www.winbond.com/NR/rdonlyres/96FEFC44-0598-4395-AA0C-B1CA855121BB/0/W25X10CL.pdf
Current photos are a but too grainy, but there are 2 of these on the board. One near the SATA on the back of the board (colored blue @ ifixit) and one near the front USB.
Dumps[edit | edit source]
Pinout[edit | edit source]
| Pin | 1x I/O | 2x I/O | Description |
|---|---|---|---|
| 1 | CS# | CS# | Chip Select |
| 2 | SO | SIO1 | Serial Data Output (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) |
| 3 | WP# | WP# | Write Protection: connect to GND |
| 4 | GND | GND | Ground |
| 5 | SI | SIO0 | Serial Data Input (for 1 x I/O) or Serial Data Input & Output (for 2x I/O) |
| 6 | SCLK | SCLK | Clock Input |
| 7 | HOLD# | HOLD# | Hold, to pause the device without deselecting the device |
| 8 | VCC | VCCS | +3V DC Power Supply |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
