Flash (Hardware)

From PS3 Developer wiki
Revision as of 20:48, 19 July 2012 by Euss (talk | contribs) (→‎Retail)
Jump to navigation Jump to search

Flash

The PS3 uses a NOR interface from the South Bridge to address the main firmware flash. On NAND based consoles, it uses the Starship2 as an interleaving bridge chip to the two NAND flash, while on NOR based consoles the single NOR flash is connected directly to the South Bridge.

SKU Differentiation

For a difference between models, see SKU Models

Retail

Flash FAT SLIM Notes
CECHA
CECHB
CECHC
CECHE
CECHE CECHG CECHH CECHK CECHL
CECHM
CECHP
CECHQ
CECH-20xx CECH-21xx CECH-25xx CECH-25xx CECH-30xx
COK
001
COK
002
COK
002W
SEM
001
DIA
001
DIA
002
VER
001
DYN
001
SUR
001
JTP
001
JSD
001
KTE
001
NAND 2x Samsung K9F1G08U0A-PIB0 Yes Yes - - No No No No No No No No
2x Samsung K9F1G08U0B-PIB0 - - - Yes No No No No No No No No
NOR 1x Spansion S29GL128N90TFIR2 No No No No Yes Yes Yes Yes - - - -
1x Samsung K8Q2815UQB-PI4B No No No No - - Yes Yes Yes - - -
1x Spansion S29GL128P90TFIR2 No No No No - - Yes Yes Yes Yes Yes Yes
1x Samsung K8P2716UZC-QI4D No No No No Yes - - - - Yes Yes Yes
1x Macronix MX29GL128ELT2I-90G No No No No - - - Yes Yes Yes - Yes

Non Retail

Reference Tool DECR1000A Communication Processor board : 1x Samsung K9F2G08U0M (NAND 1x2Gbit=256MB total)

Other Flash

Renesas HN58X2504TIE (EEPROM)

8-pin TSSOP
Renesas HN58X2504TIE

Note: although edepot&others lists it on the board, I can only find this IC in the sixaxis.
Datasheet

productcode meaning:
H - 
N - 
5 -
8 - Organisation : x8bit
X - 
2 - 
5 - 
0 - 
4 - Density : 4-kbit (512x8bit)
T - Package : 8pin plastic TSSOP (TTP-8DAV)
I - Temp : Industrial (-40 to +85 °C 
E - Environment : Lead Free


Each PS3 has a special EEPROM chip on the motherboard using a SPI Serial Interface Renasas chip.

Type Size Speed Voltage Packaging Manufacturer Serial Number Description
EEPROM 4-kbit (512x8bit) 3MHz 1.8V to 5.5V 8-pin TSSOP Renesas HN58X2504TIE PS3 EEPROM chip


Pin Usage Remarks
1 S Chip Select
2 Q Serial data output
3 W Write Protect
4 VSS Ground
5 D Serial data input
6 C Serial Clock
7 HOLD Hold
8 VCC Vcc (min 1.8V-max 5.5V)


Template:Console