This page is intended to document the actions taken by Sony when they perform official repairs to PS3 consoles.
- OEM stickers are replaced; for regions that have dates/datecodes on them, they are updated accordingly.
- For slim (and potentially super slim) models, an official "PlayStation refurbished" sticker is also applied.
- The CELL BE run time counter is reset to zero.
- CECHA/CECHB/CECHE: ZSSR539IA replaced with APS-226 (if it doesn't have one already)
- BD-400 replaced with BD-410
- Felt added to Blu-ray drive entry on top-most part of shell
- Grey felt strip added under Blu-ray drive, replacing smaller grey fabric
- CELL BE brace added
- RSX replaced with a newer one
- If the RSX is 65nm or 40nm, a sticker is added under the USB ports (40 for 40nm, 65 for 65nm) to indicate. Also the Syscon chip is replaced (with different programming) so that the PS3 can accept the smaller RSX
Felt added to Blu-ray entrance
Felt strip added beneath Blu-ray drive
"40" sticker indicating a 40nm RSX
see DECR Series
CECHA00 Sony servicing report
COK-001 (CECHA00) board that had a Sony Refurbishment. Servicing dated 2010-04. The RSX has been replaced with a newer 90nm one with a 09 datecode.
COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.
COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.
|
---|
| Generic | | |
---|
| Cooling | |
---|
| Peripheral | |
---|
| Storage | |
---|
| Repair | |
---|
| Visual | |
---|
|