Template:Syscon pinout LQFP 128 pins

Pin #	Name		Type	Description	STBY Voltages
	NEC/Renesas	Sony/Custom
1	P142/SCK20/SCL20		←I	Connected to pin27 @Panasonic MN8647091	0
2	P141/PCLBUZ1/INTP7	SB_INT	←I/O→	SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?)	0
3	P140/PCLBUZ0/INTP6	BE_INT	←I/O→	BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V)	3.15
4				To +12V_MAIN through the resistor and divider	0
5	P37/POW_LED			Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563)	0
6	P36/STBY_LED			Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563)	3v @ standby (3.3V)
7				Connected to pinAA18@SB	0
8				Connected to pinAA17@SB	0
9				CELL BE related?	0
10					0
11	P106			Connected to Backlit LEDs on switch board	0
12	P105			Connected to CONTOUR LEDs on switch board	0
13	P104			Absent element between this line and GND. Nothing else.	0
14					0
15	INTP??				0
16	BUZZER				0
17	P45/SO01				0
18	P44/SI01			3v @ standby	3.0
19	P43/SCK01				0
20					0
21	TOOL1			Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode	3.0
22	TOOL0/Debugger Pin?			Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode	0
23	P127/SO21				0
24	P126/THR_I2C_SDA			Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line)	3v @ standby (3.15)
25	P125/THR_I2C_SCL			Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line)	3v @ standby (3.15)
26	RESET?			Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27	P124			Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28	P123			Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29	P137/FLMD0			Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode	3.33
30	P122			Connected to a small external oscilator 2 ?	0.8v @ standby (1.1)
31	P121			Connected to a small external oscilator 2 ?	2.2v @ standby (2.4)
32	REGC
33	GROUND/Vss0				0
34	GROUND/EVss0				0
35	Vdd			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
36	EVdd0			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
37	P60			0.2v @ standby	0
38	P61			0.2v @ standby	0
39					0
40					0
41	P31/AC IN?			3v @ standby (3.3)	3.3
42				Connected (indirectly) to voltage regulator BD9684 0906, pin 4	0
43	P65			Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode	3.0
44					0
45					0
46	INTP??				0
47	P76			3v @ standby (3.15)	3.15
48	P75			3v @ standby (3.15)	3.15
49	INTP??				0
50	P73			Connected to pin 3 @ Service Connector. And to voltage regulator D35653 0S25	0
51					0
52				Connected to voltage regulator BD3525, pin 12	0
53					0
54					0
55					0
56	GROUND/EVss1				0
57	EVdd1			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
58					0
59					0
60					0
61					0
62					0
63					0
64					0
65					0
66	INTP??				0
67					0
68					0
69					0
70					0
71					0
72					0
73					0
74					0
75				Connected to voltage regulator Mitsumi 040 810X, pin 5	0
76	P16			3v @ standby (3.15)	3.15
77	P15			3v @ standby (3.3)	3.3
78	SC_RxD(RxD3/RxD2/P14)			SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector	0
79	SC_TxD(TxD3/TxD2/P13)			SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector	3.3
80	P12/EX26/SO00/TxD0			SO from Cell Slave to Syscon Master	0
81	P11 P11/EX25/SI00/RxD0			SI from Syscon Master to Cell Slave	1.2
82	P10/EX24/SCK00			Serial Clock	0
83	P90			Chip Select	2.0
84	P91			3v @ standby	3.0
85					0
86					0
87					0
88	P95/SCK11/SCL11				0
89	/SI11/SDA11				0
90	P97/SO11				0
91					0
92				Connected to voltage regulator BD3527 (near FLASH), pin 12	0
93					0
94					0
95				Connected to voltage regulator BD3527 (near USB), pin 12	0
96					0
97	P101			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
98					0
99					0
100	P146			Connected to voltage regulator 463A, pin 2 (3.3_EVER_B)	3v @ standby (3.3)
101	GROUND				0
102					0
103					0
104					0
105					0
106					0
107					0
108					0
109	P150			3v @ standby	3.0
110	P27/POW_SW_DET			Power switch detect. Connected to switch board	3v @ standby (3.3) 3.3
111	P26/EJECT_SW_DET			Eject switch detect. Connected to switch board	3v @ standby (3.3) 3.3
112					0
113					0
114					0
115					0
116					0
117	P20			(0V?)	0
118	P130/ACDC_STBY			Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ?	3v @ standby (3.3)
119	P102				3v @ standby (3.3)
120					0
121	P04/SCK10/SCL10				0
122	SI10/RxD1/SDA10				0
123	P02/SO10/TxD1				0
124				Connected to pin93 @Panasonic MN8647091	0
125					0
126	P145/FAN_PWM			PWM Control for the Fan.	0
127	P144/SO20/TxD2				0
128	/SI20/RxD2/SDA20			Connected to pin29 @Panasonic MN8647091	0