Sony Refurbishment

Description

This page is intended to document the actions taken by Sony when they perform official repairs to PS3 consoles.

General

• OEM stickers are replaced; for regions that have dates/datecodes on them, they are updated accordingly.
  • For slim (and potentially super slim) models, an official "PlayStation refurbished" sticker is also applied.
• The CELL BE run time counter is reset to zero.

SKU Models

Fat/Phat

COK-00x

• CECHA/CECHB/CECHE: ZSSR539IA replaced with APS-226 (if it doesn't have one already)
• BD-400 replaced with BD-410
• Felt added to Blu-ray drive entry on top-most part of shell
• Grey felt strip added under Blu-ray drive, replacing smaller grey fabric
• CELL BE brace added
• RSX replaced with a newer one
  • If the RSX is 65nm or 40nm, a sticker is added under the USB ports (40 for 40nm, F for 65nm) to indicate. Also the Syscon chip is replaced (with different programming) so that the PS3 can accept the smaller RSX

• 

  Felt added to Blu-ray entrance

• 

  Felt strip added beneath Blu-ray drive

• 

  Brace added underneath CELL BE

• 

  "40" sticker indicating a 40nm RSX

Non-Retail

see DECR Series

Gallery

• 

  CECHA00 Sony servicing report

• 

  COK-001 (CECHA00) board that had a Sony Refurbishment. Servicing dated 2010-04. The RSX has been replaced with a newer 90nm one with a 09 datecode.

• 

  COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.

• 

  COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.