Template:Syscon pinout LQFP 128 pins
Jump to navigation
Jump to search
| Pin # | Name | Type | Description | STBY Voltages | |
|---|---|---|---|---|---|
| NEC/Renesas | Sony/Custom | ||||
| 1 | P142/SCK20/SCL20 | ←I | Connected to pin27 @Panasonic MN8647091 | 0 | |
| 2 | P141/PCLBUZ1/INTP7 | SB_INT | ←I/O→ | SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) | 0 |
| 3 | P140/PCLBUZ0/INTP6 | BE_INT | ←I/O→ | BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) | 3.15 |
| 4 | P120/INTP0/EXLVI | ←I/O→ | To +12V_MAIN through the resistor and divider | 0 | |
| 5 | P37 | POW_LED | ←I/O→ | Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) | 0 |
| 6 | P36 | STBY_LED | ←I/O→ | Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) | 3v @ standby (3.3V) |
| 7 | P35 | ←I/O→ | Connected to pinAA18@SB | 0 | |
| 8 | P34 | ←I/O→ | Connected to pinAA17@SB | 0 | |
| 9 | P33 | ←I/O→ | CELL BE related? | 0 | |
| 10 | P32 | ←I/O→ | 0 | ||
| 11 | P163/TI13/TO13 | ←I/O→ | Connected to Backlit LEDs on switch board | 0 | |
| 12 | P162/TI12/TO12 | ←I/O→ | Connected to CONTOUR LEDs on switch board | 0 | |
| 13 | P161/TI11/TO11 | ←I/O→ | Absent element between this line and GND. Nothing else. | 0 | |
| 14 | P160/TI10/TO10 | ←I/O→ | 0 | ||
| 15 | P47/INTP2 | ←I/O→ | 0 | ||
| 16 | P46/INTP1/TI05/TO05 | BUZZER | ←I/O→ | 0 | |
| 17 | P45/SO01 | ←I/O→ | 0 | ||
| 18 | P44/SI01 | ←I/O→ | 3v @ standby | 3.0 | |
| 19 | P43/SCK01 | ←I/O→ | 0 | ||
| 20 | P42/TI04/TO04 | ←I/O→ | 0 | ||
| 21 | P41/TOOL1 | ←I/O→ | Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode | 3.0 | |
| 22 | P40/TOOL0 | Debugger Pin? | ←I/O→ | Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode | 0 |
| 23 | P127/SO21 | ←I/O→ | 0 | ||
| 24 | P126/SI21/SDA21 | THR_I2C_SDA | ←I/O→ | Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) | 3v @ standby (3.15) |
| 25 | P125/SCK21/SCL21 | THR_I2C_SCL | ←I/O→ | Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) | 3v @ standby (3.15) |
| 26 | RESET | ←I | Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3 | ||
| 27 | P124/XT2 | ←I | Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) | ||
| 28 | P123/XT1 | ←I | Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) | ||
| 29 | FLMD0 | - | Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode | 3.33 | |
| 30 | P122/X2/EXCLK | ←I | Connected to a small external oscilator 2 ? | 0.8v @ standby (1.1) | |
| 31 | P121/X1 | ←I | Connected to a small external oscilator 2 ? | 2.2v @ standby (2.4) | |
| 32 | REGC | ←I/O→ | |||
| 33 | VSS0 | GROUND | - | 0 | |
| 34 | EVSS0 | GROUND | - | 0 | |
| 35 | VDD | - | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
| 36 | EVDD0 | - | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
| 37 | P60/SCL0 | ←I/O→ | 0.2v @ standby | 0 | |
| 38 | P61/SDA0 | ←I/O→ | 0.2v @ standby | 0 | |
| 39 | P62 | ←I/O→ | 0 | ||
| 40 | P63 | ←I/O→ | 0 | ||
| 41 | P31/TI03/TO03/INTP4 | AC IN? | ←I/O→ | 3v @ standby (3.3) | 3.3 |
| 42 | P64/RD | ←I/O→ | Connected (indirectly) to voltage regulator BD9684 0906, pin 4 | 0 | |
| 43 | P65/WR0 | ←I/O→ | Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode | 3.0 | |
| 44 | P66/WR1 | ←I/O→ | 0 | ||
| 45 | P67/ASTB | ←I/O→ | 0 | ||
| 46 | P77/EX23/KR7/INTP11 | ←I/O→ | 0 | ||
| 47 | P76/EX22/KR6/INTP10 | ←I/O→ | 3v @ standby (3.15) | 3.15 | |
| 48 | P75/EX21/KR5/INTP9 | ←I/O→ | 3v @ standby (3.15) | 3.15 | |
| 49 | P74/EX20/KR4/INTP8 | ←I/O→ | 0 | ||
| 50 | P73/EX19/KR3 | ←I/O→ | Connected to pin 3 @ Service Connector. And to voltage regulator D35653 0S25 | 0 | |
| 51 | P72/EX18/KR2 | ←I/O→ | 0 | ||
| 52 | P71/EX17/KR1 | ←I/O→ | Connected to voltage regulator BD3525, pin 12 | 0 | |
| 53 | P70/EX16/KR0 | ←I/O→ | 0 | ||
| 54 | P06/WAIT | ←I/O→ | 0 | ||
| 55 | P05/CLKOUT | ←I/O→ | 0 | ||
| 56 | EVSS1 | GROUND | - | 0 | |
| 57 | EVDD1 | - | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
| 58 | P80/EX0 | ←I/O→ | 0 | ||
| 59 | P81/EX1 | ←I/O→ | 0 | ||
| 60 | P82/EX2 | ←I/O→ | 0 | ||
| 61 | P83/EX3 | ←I/O→ | 0 | ||
| 62 | P84/EX4 | ←I/O→ | 0 | ||
| 63 | P85/EX5 | ←I/O→ | 0 | ||
| 64 | P86/EX6 | ←I/O→ | 0 | ||
| 65 | P87/EX7 | ←I/O→ | 0 | ||
| 66 | P30/INTP3/RTC1HZ | ←I/O→ | 0 | ||
| 67 | P50/EX8 | ←I/O→ | 0 | ||
| 68 | P51/EX9 | ←I/O→ | 0 | ||
| 69 | P52/EX10 | ←I/O→ | 0 | ||
| 70 | P53/EX11 | ←I/O→ | 0 | ||
| 71 | P54/EX12 | ←I/O→ | 0 | ||
| 72 | P55/EX13 | ←I/O→ | 0 | ||
| 73 | P56/EX14 | ←I/O→ | 0 | ||
| 74 | P57/EX15 | ←I/O→ | 0 | ||
| 75 | P17/EX31/TI02/TO02 | ←I/O→ | Connected to voltage regulator Mitsumi 040 810X, pin 5 | 0 | |
| 76 | P16/EX30/TI01/TO01/INTP5 | ←I/O→ | 3v @ standby (3.15) | 3.15 | |
| 77 | P15/EX29/RTCDIV/RTCCL | ←I/O→ | 3v @ standby (3.3) | 3.3 | |
| 78 | P14/EX28/RxD3 | SC_RxD | ←I/O→ | SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector | 0 |
| 79 | P13/EX27/TxD3 | SC_TxD | ←I/O→ | SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector | 3.3 |
| 80 | P12/EX26/SO00/TxD0 | ←I/O→ | SO from Cell Slave to Syscon Master | 0 | |
| 81 | P11/EX25/SI00/RxD0 | ←I/O→ | SI from Syscon Master to Cell Slave | 1.2 | |
| 82 | P10/EX24/SCK00 | ←I/O→ | Serial Clock | 0 | |
| 83 | P90/EX32 | ←I/O→ | Chip Select | 2.0 | |
| 84 | P91/EX33 | ←I/O→ | 3v @ standby | 3.0 | |
| 85 | P92/EX34 | ←I/O→ | 0 | ||
| 86 | P93/EX35 | ←I/O→ | 0 | ||
| 87 | P94 | ←I/O→ | 0 | ||
| 88 | P95/SCK11/SCL11 | ←I/O→ | 0 | ||
| 89 | P96/SI11/SDA11 | ←I/O→ | 0 | ||
| 90 | P97/SO11 | ←I/O→ | 0 | ||
| 91 | P112 | ←I/O→ | 0 | ||
| 92 | P113 | ←I/O→ | Connected to voltage regulator BD3527 (near FLASH), pin 12 | 0 | |
| 93 | P114 | ←I/O→ | 0 | ||
| 94 | P115 | ←I/O→ | 0 | ||
| 95 | P116 | ←I/O→ | Connected to voltage regulator BD3527 (near USB), pin 12 | 0 | |
| 96 | P117 | ←I/O→ | 0 | ||
| 97 | AVREF1 | - | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
| 98 | P110/ANO0 | ←I/O→ | 0 | ||
| 99 | P111/ANO1 | ←I/O→ | 0 | ||
| 100 | AVREF0 | - | Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) | 3v @ standby (3.3) | |
| 101 | AVSS0 | GROUND | - | 0 | |
| 102 | P157/ANI15 | ←I/O→ | 0 | ||
| 103 | P156/ANI14 | ←I/O→ | 0 | ||
| 104 | P155/ANI13 | ←I/O→ | 0 | ||
| 105 | P154/ANI12 | ←I/O→ | 0 | ||
| 106 | P153/ANI11 | ←I/O→ | 0 | ||
| 107 | P152/ANI10 | ←I/O→ | 0 | ||
| 108 | P151/ANI9 | ←I/O→ | 0 | ||
| 109 | P150/ANI8 | ←I/O→ | 3v @ standby | 3.0 | |
| 110 | P27/ANI7 | POW_SW_DET | ←I/O→ | Power switch detect. Connected to switch board | 3v @ standby (3.3) 3.3 |
| 111 | P26/ANI6 | EJECT_SW_DET | ←I/O→ | Eject switch detect. Connected to switch board | 3v @ standby (3.3) 3.3 |
| 112 | P25/ANI5 | ←I/O→ | 0 | ||
| 113 | P24/ANI4 | ←I/O→ | 0 | ||
| 114 | P23/ANI3 | ←I/O→ | 0 | ||
| 115 | P22/ANI2 | ←I/O→ | 0 | ||
| 116 | P21/ANI1 | 0 | |||
| 117 | P20/ANI0 | ←I/O→ | (0V?) | 0 | |
| 118 | P130 | ACDC_STBY | O→ | Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ? | 3v @ standby (3.3) |
| 119 | P131/TI06/TO06 | ←I/O→ | 3v @ standby (3.3) | ||
| 120 | P07 | ←I/O→ | 0 | ||
| 121 | P04/SCK10/SCL10 | ←I/O→ | 0 | ||
| 122 | P03/SI10/RxD1/SDA10 | ←I/O→ | 0 | ||
| 123 | P02/SO10/TxD1 | ←I/O→ | 0 | ||
| 124 | P01/TO00 | ←I/O→ | Connected to pin93 @Panasonic MN8647091 | 0 | |
| 125 | P00/TI00 | ←I/O→ | 0 | ||
| 126 | P145/TI07/TO07 | FAN_PWM | ←I/O→ | PWM Control for the Fan. | 0 |
| 127 | P144/SO20/TxD2 | ←I/O→ | 0 | ||
| 128 | P143/SI20/RxD2/SDA20 | ←I/O→ | Connected to pin29 @Panasonic MN8647091 | 0 | |