Template:DSW-001 pinout: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 1: Line 1:
{| class="wikitable sortable"
{| class="wikitable"
|+[[DSW-001]] Pinout {{ed right|DSW-001 pinout}}
|+[[DSW-001]] Pinout {{ed right|DSW-001 pinout}}
! rowspan="2" | Pin !! rowspan="2" | Name !! colspan="2" | Connected to !! rowspan="2" | Description
! rowspan="2" | Pin !! rowspan="2" | Name !! colspan="2" | Connected to !! rowspan="2" | Description
Line 9: Line 9:
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
|-
|-
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x WHITE LEDs, ground pins || Inner LEDs for EJECT button backlight
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds, ground pins || Inner LEDs for EJECT button backlight
|-
|-
| 2x WHITE LEDs, ground pins || Inner LEDs for POWER button backlight
| 2x White leds, ground pins || Inner LEDs for POWER button backlight
|-
|-
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || POWER switch {{buttonpower}} || Sink to ground to activate.
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate.
|-
|-
| 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || EJECT switch {{buttoneject}} || Sink to ground to activate.
| 5 || EJECT_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 111 || Eject switch {{buttoneject}} || Sink to ground to activate.
|-
|-
| 6 || POW_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 5 || GREEN led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
| 6 || POW_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 5 || Green led || Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
|-
|-
| 7 || STBY_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 6 || RED led || Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
| 7 || STBY_LED || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 6 || Red led || Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
|-
|-
| 8 || BD_LED || BluRay Connector, pin 13 || BLUE led || Connects to blue LED over eject switch.
| 8 || BD_LED || BluRay Connector, pin 13 || Blue led || Connects to blue LED over eject switch.
|-
|-
| 9 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground
| 9 || GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} GND || {{cellcolors|#333333|white}} Ground
|-
|-
| 10 || +5V_EVER || {{cellcolors|#CC3333|white}} CN101 [[Power Supply]], pin1 ? || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} | +5V DC VCC
| 10 || +5V_EVER || {{cellcolors|#CC3333|white}} [[Power Supply]] Connector (CN101), pin 1 || {{cellcolors|#CC3333|white}} VCC || {{cellcolors|#CC3333|white}} 5V Standby
|}
|}
* above top panel view port behind pcb. resistors was not tested.
* above top panel view port behind pcb. resistors was not tested.
<noinclude>[[Category:Templates]]</noinclude>
<noinclude>[[Category:Templates]]</noinclude>

Revision as of 14:37, 5 December 2021

DSW-001 Pinout
[edit]
Pin Name Connected to Description
On Motherboard On Switch board
1 RMC_IN ? Syscon SW2-30x, pin 13 Testpad Only This line have a Testpad @ switchboard, seems that it is a service pin.
Also connected to a pin of a Service Connectors ?
2 SW_PWM ? Syscon SW2-30x, pin 12 4x CONTOUR LEDs Permanently inactive by default.
On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED.
3 ? Syscon SW2-30x, pin 11 2x White leds, ground pins Inner LEDs for EJECT button backlight
2x White leds, ground pins Inner LEDs for POWER button backlight
4 POW_SW Syscon SW2-30x, pin 110 Power switch PS3 power button Sink to ground to activate.
5 EJECT_SW Syscon SW2-30x, pin 111 Eject switch PS3 eject button Sink to ground to activate.
6 POW_LED Syscon SW2-30x, pin 5 Green led Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch.
7 STBY_LED Syscon SW2-30x, pin 6 Red led Connects to top-left corner pin (red gnd) of dual red/green LED over power switch.
8 BD_LED BluRay Connector, pin 13 Blue led Connects to blue LED over eject switch.
9 GND GND GND Ground
10 +5V_EVER Power Supply Connector (CN101), pin 1 VCC 5V Standby
  • above top panel view port behind pcb. resistors was not tested.
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:DSW-001_pinout&oldid=63678"