Sony Refurbishment: Difference between revisions

Revision as of 12:25, 7 October 2024

This page is intended to document the actions taken by Sony when they perform official repairs to PS3 consoles.

CECHA/CECHB/CECHE: ZSSR539IA replaced with APS-226 (if it doesn't have one already)
BD-400 replaced with BD-410
Felt added to Blu-ray drive entry on top-most part of shell
Grey felt strip added under Blu-ray drive, replacing smaller grey fabric
CELL BE brace added
RSX replaced with a newer one
- If the RSX is 65nm or 40nm, a sticker is added under the USB ports (40 for 40nm, 65 for 65nm) to indicate. Also the Syscon chip is replaced (with different programming) so that the PS3 can accept the smaller RSX

@@ Line 4: / Line 4: @@
 ==Fat/Phat==
 ===COK-00x===
+* [[CECHAxx|CECHA]]/[[CECHBxx|CECHB]]/[[CECHExx|CECHE]]: [[ZSSR539IA]] replaced with [[APS-226]] (if it doesn't have one already)
+* [[BD-400]] replaced with [[BD-410]]
 * Felt added to Blu-ray drive entry on top-most part of shell
-* [[BD-400]] replaced with [[BD-410]]
 * Grey felt strip added under Blu-ray drive, replacing smaller grey fabric
 * [[CELL BE]] brace added
@@ Line 13: / Line 14: @@
 <gallery>
 Sony Serviced COK-001 Blu-ray Felt entry.jpg|Felt added to Blu-ray entrance
-Sony Serviced COK-001 Blu-ray Felt underneath.jpg|Felt added underneath Blu-ray drive
+Sony Serviced COK-001 Blu-ray Felt underneath.jpg|Felt strip added beneath Blu-ray drive
 Sony Serviced COK-001 Cell Brace.jpg|Brace added underneath [[CELL BE]]
 Sony Serviced COK-001 (CECHA) 40nm RSX.jpg|"40" sticker indicating a 40nm [[RSX]]