Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 12: Line 12:
! class="unsortable" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! class="unsortable" | Sony/Custom
! class="unsortable" | <abbr title="NEC/Renesas optional pin configuration">NEC/Renesas</abbr> !! class="unsortable" | Sony/Custom
|-
|-
| 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20  || HDMI_I2C_SCL ? || {{pini}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0
| 1 || 14 || {{cellcolors|#77f|#ff0}} SCL20  || HDMI_I2C_SCL ? || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] pin 27 || 0
|-
|-
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || {{pini}} || Connected to [[South Bridge]] [[CXD9963GB]] pad D1 through a resistor || ~1V @ standby (0 V?)
| 2 || 14 || <s>P141/PCLBUZ1/</s>INTP7 || SB_INT/SYSCSINT || {{pini}} || Connected to [[South Bridge]] [[CXD9963GB]] pad D1 through a resistor || ~1V @ standby (0 V?)
Line 18: Line 18:
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || {{pini}} || Connected to [[CELL BE|CELL]] pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
| 3 || 14 || <s>P140/PCLBUZ0/</s>INTP6 || BE_INT/ATTENTION || {{pini}} || Connected to [[CELL BE|CELL]] pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) || 3V @ standby (3.15V)
|-
|-
| 4 || 12 || {{cellcolors|#ff9933}} EXLVI ||  || {{pinio}} || Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
| 4 || 12 || {{cellcolors|#ff9933}} EXLVI ||  || {{pin}} || Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) || 0
|-
|-
| 5 || 3 || {{cellcolors|#ffff88}} P37 || POW_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) || 0
| 5 || 3 || {{cellcolors|#ffff88}} P37 || POW_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) || 0
Line 24: Line 24:
| 6 || 3 || {{cellcolors|#ffff88}} P36 || STBY_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) || 3v @ standby (3.3V)
| 6 || 3 || {{cellcolors|#ffff88}} P36 || STBY_LED || {{pino}} || Connected to [[switch boards|Switch board]] dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) || 3v @ standby (3.3V)
|-
|-
| 7 || 3 || P35 ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 || 0
| 7 || 3 || P35 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA18 || 0
|-
|-
| 8 || 3 || P34 ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 || 0
| 8 || 3 || P34 ||  || ? || Connected to [[South Bridge]] [[CXD9963GB]] pad AA17 || 0
|-
|-
| 9 || 3 || P33 ||  || {{pinio}} || CELL BE related? || 0
| 9 || 3 || P33 ||  || ? || CELL BE related? || 0
|-
|-
| 10 || 3 || P32 ||  || {{pinio}} ||  || 0
| 10 || 3 || P32 ||  || ? ||  || 0
|-
|-
| 11 || 16 || {{cellcolors|#ffff88}} <s>P163/TI13/</s>TO13 || BACK_LEDS || {{pino}} || Connected to [[switch boards|Switch board]] backlit LEDs through a transistor || 0
| 11 || 16 || {{cellcolors|#ffff88}} <s>P163/TI13/</s>TO13 || BACK_LEDS || {{pino}} || Connected to [[switch boards|Switch board]] backlit LEDs through a transistor || 0
Line 40: Line 40:
| 14 || 16 || <s>P160/TI10/TO10</s> ||  || {{pinnc}} || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
| 14 || 16 || <s>P160/TI10/TO10</s> ||  || {{pinnc}} || NOT_CONNECTED. <abbr title="The board circuit is designed to connect this pin to GND through a missing component>Floating</abbr> through a missing SMD component at the other side of the board. See: [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] || 0
|-
|-
| 15 || 4 || {{cellcolors|#d699ff|#ffffff}} P47/INTP2 || BT_WAKEON ? || {{pinio}} || Connected to [[Wifi|Wifi/BT]] module || 0
| 15 || 4 || {{cellcolors|#d699ff|#ffffff}} P47/INTP2 || BT_WAKEON ? || {{pini}} || Connected to [[Wifi|Wifi/BT]] module || 0
|-
|-
| 16 || 4 || {{cellcolors|#246|#fff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || {{pino}} || Connected to the Buzzer through a transistor || 0
| 16 || 4 || {{cellcolors|#246|#fff}} <s>P46/INTP1/TI05/</s>TO05 || BUZZER || {{pino}} || Connected to the Buzzer through a transistor || 0
|-
|-
| 17 || 4 || {{cellcolors|#33f|#fff}} SO01 ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DO) || 0
| 17 || 4 || {{cellcolors|#33f|#fff}} SO01 ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DO) || 0
|-
|-
| 18 || 4 || {{cellcolors|#33f|#fff}} SI01 ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DI) || 3v @ standby
| 18 || 4 || {{cellcolors|#33f|#fff}} SI01 ||  || {{pini}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_DI) || 3v @ standby
|-
|-
| 19 || 4 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK01</span> ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CLK) || 0
| 19 || 4 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK01</span> ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CLK) || 0
|-
|-
| 20 || 4 || {{cellcolors|#33f|#fff}} P42 ||  || {{pinio}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CS) || 0
| 20 || 4 || {{cellcolors|#33f|#fff}} P42 ||  || {{pino}} || Connected to [[South Bridge]] [[CXD9963GB]] ? (SB_SPI_CS) || 0
|-
|-
| 21 || 4 || {{cellcolors|#aa7744}} TOOL1 || TOOL_CLK || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 13 (Tool clock) through a missing resistor || 3.0
| 21 || 4 || {{cellcolors|#aa7744}} TOOL1 || TOOL_CLK || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 13 (Tool clock) through a missing resistor || 3.0
|-
|-
| 22 || 4 || {{cellcolors|#aa7744}} TOOL0 || TOOL_DAT || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 7 (Tool Data) through a missing resistor || 0
| 22 || 4 || {{cellcolors|#aa7744}} TOOL0 || TOOL_DAT || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 7 (Tool Data) through a missing resistor || 0
|-
|-
| 23 || 12 || P127/SO21 ||  || {{pinio}} ||  || 0
| 23 || 12 || P127/SO21 ||  || ? ||  || 0
|-
|-
| 24 || 12 || {{cellcolors|#77f|#ff0}} SDA21 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 7 (SMBus data) || 3v @ standby (3.15)
| 24 || 12 || {{cellcolors|#77f|#ff0}} SDA21 || THR_I2C_SDA || {{pinio}} || Connected to [[Thermal#Temperature_Monitors|Temperature Monitors]] pin 7 (SMBus data) || 3v @ standby (3.15)
Line 68: Line 68:
| 28 || 12 || {{cellcolors|#555|#fff}} XT1 || XT_SUB/OSCIN ? || {{pini}} || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)  ||  
| 28 || 12 || {{cellcolors|#555|#fff}} XT1 || XT_SUB/OSCIN ? || {{pini}} || Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)  ||  
|-
|-
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || {{pin}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.33
| 29 ||  || {{cellcolors|#aa7744}} FLMD0 || FLASH_MODE || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 8 (Flash programming mode) through a missing resistor || 3.33
|-
|-
| 30 || 12 || {{cellcolors|#555|#fff}} X2 || XT_MAIN/XTAL ? || {{pini}} || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 0.8v @ standby (1.1)
| 30 || 12 || {{cellcolors|#555|#fff}} X2 || XT_MAIN/XTAL ? || {{pini}} || Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) || 0.8v @ standby (1.1)
Line 84: Line 84:
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
| 36 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
|-
|-
| 37 || 6 || {{cellcolors|#77f|#ff0}} SCL0 || MK_I2C_SCL || {{pinio}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 37 || 0.2v @ standby
| 37 || 6 || {{cellcolors|#77f|#ff0}} SCL0 || MK_I2C_SCL || {{pino}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 37 || 0.2v @ standby
|-
|-
| 38 || 6 || {{cellcolors|#77f|#ff0}} SDA0 || MK_I2C_SDA || {{pinio}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 38 || 0.2v @ standby
| 38 || 6 || {{cellcolors|#77f|#ff0}} SDA0 || MK_I2C_SDA || {{pinio}} || Connected to Texas Instruments-SCEI Clock Generator [[CDC972]] pin 38 || 0.2v @ standby
Line 90: Line 90:
! colspan="7" style="padding:1px" data-sort-value="38.5"|
! colspan="7" style="padding:1px" data-sort-value="38.5"|
|-
|-
| 39 || 6 || P62 ||  || {{pinio}} ||  || 0
| 39 || 6 || P62 ||  || ? ||  || 0
|-
|-
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || {{pini}} || 10K resistor to GND || 0
| 40 || 6 || {{cellcolors|#c0c0c0}} P63 || P63_DOWN || {{pin}} || 10K resistor to GND || 0
|-
|-
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || {{pini}} || Connected to [[Power Supply]] control connector pin 4 through a transistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
| 41 || 3 || {{cellcolors|#ff9933}} <s>P31/TI03/TO03/</s>INTP4 || ACIN_DET || {{pini}} || Connected to [[Power Supply]] control connector pin 4 through a transistor. See: [[Media:SYSCON_SWx_JTP-001_JSD-001_HSW-001_CN101.jpg|schematic]] || 3v @ standby (3.3)
|-
|-
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || {{pinio}} || Connected to voltage regulator [[Talk:Regulators | BD9684 0906]] pin 4 (enable something) through some undocumented components || 0
| 42 || 6 || {{cellcolors|#33cc33|#ffffff}} P64/<span style="text-decoration: overline;">RD</span> ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD9684 0906]] pin 4 (enable something) through some undocumented components || 0
|-
|-
| 43 || 6 || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">WR0</span> ||  || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 12 through a missing resistor  || 3.0
| 43 || 6 || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">WR0</span> ||  || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 12 through a missing resistor  || 3.0
|-
|-
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || {{pinio}} ||  || 0
| 44 || 6 || P66/<span style="text-decoration: overline;">WR1</span> ||  || ? ||  || 0
|- {{cellcolors|#eee}}
|- {{cellcolors|#eee}}
| 45 || 6 || <s>P67/ASTB</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
| 45 || 6 || <s>P67/ASTB</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
|-
|-
| 46 || 7 || {{cellcolors|#33f|#e77}} P77/EX23/KR7/INTP11 ||  || {{pino}} || Connected to [[CELL BE]] through a transistor (labeled 26 and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal (inverted direction than the signal from pin 109) || 0
| 46 || 7 || {{cellcolors|#33f|#e77}} P77/EX23/KR7/INTP11 ||  || ? || Connected to [[CELL BE]] through a transistor (labeled 26 and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal (inverted direction than the signal from pin 109) || 0
|-
|-
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || {{pinio}} ||  || 3v @ standby (3.15)
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || ? ||  || 3v @ standby (3.15)
|-
|-
| 48 || 7 || {{cellcolors|#33f|#e77}} P75/EX21/KR5/INTP9 ||  || {{pini}} || Connected to [[RSX]] through a transistor (labeled ND and located near the RSX temperature monitor)<br>It seems to be some kind of ALERT signal (related with the signal from pin 76) || 3v @ standby (3.15)
| 48 || 7 || {{cellcolors|#33f|#e77}} P75/EX21/KR5/INTP9 ||  || ? || Connected to [[RSX]] through a transistor (labeled ND and located near the RSX temperature monitor)<br>It seems to be some kind of ALERT signal (related with the signal from pin 76) || 3v @ standby (3.15)
|-
|-
| 49 || 7 || {{cellcolors|#c0c0c0}} <s>P74/EX20/KR4/</s>INTP8 || INTP8_DOWN || {{pini}} || 10K resistor to GND || 0
| 49 || 7 || {{cellcolors|#c0c0c0}} P74<s>/EX20/KR4/INTP8</s> || P74_DOWN || {{pin}} || 10K resistor to GND || 0
|-
|-
| 50 || 7 || {{cellcolors|#aa7744}} KR3 ||  || {{pinio}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 3<br>Connected to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
| 50 || 7 || {{cellcolors|#aa7744}} KR3 ||  || ? || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 3<br>Connected to voltage regulator [[Talk:Regulators | D35653 0S25]] (FLASH_ENABLE ?) || 0
|-
|-
| 51 || 7 || P72/EX18/KR2 ||  || {{pinio}} || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 98 KC, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
| 51 || 7 || P72/EX18/KR2 ||  || ? || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 98 KC, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
|-
|-
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || {{pinio}} || Connected to voltage regulator [[Talk:Regulators | BD3525]] pin 12 (enable something) || 0
| 52 || 7 || {{cellcolors|#33cc33|#ffffff}} P71/EX17/KR1 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD3525]] pin 12 (enable something) || 0
|-
|-
| 53 || 7 || P70/EX16/KR0 ||  || {{pinio}} ||  || 0
| 53 || 7 || P70/EX16/KR0 ||  || ? ||  || 0
|-
|-
| 54 || 0 || {{cellcolors|#c0c0c0}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || {{pinio}} || 45K resistor array to GND || 0
| 54 || 0 || {{cellcolors|#c0c0c0}} P06<s>/<span style="text-decoration: overline;">WAIT</span></s> || P06_DOWN || {{pin}} || 45K resistor array to GND || 0
|-
|-
| 55 || 0 || {{cellcolors|#c0c0c0}} P05<s>/CLKOUT</s> || P05_DOWN || {{pinio}} || 45K resistor array to GND || 0
| 55 || 0 || {{cellcolors|#c0c0c0}} P05<s>/CLKOUT</s> || P05_DOWN || {{pin}} || 45K resistor array to GND || 0
|-
|-
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || {{pin}} ||  || 0
| 56 ||  || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || {{pin}} ||  || 0
Line 128: Line 128:
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
| 57 ||  || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || {{pin}} || Connected to standby voltage regulator [[Talk:Regulators|463A]] pin 2 || 3v @ standby (3.3)
|-  
|-  
| 58 || 8 || P80/EX0 ||  || {{pinio}} ||  || 0
| 58 || 8 || P80/EX0 ||  || ? ||  || 0
|-
|-
| 59 || 8 || P81/EX1 ||  || {{pinio}} ||  || 0
| 59 || 8 || P81/EX1 ||  || ? ||  || 0
|-
|-
| 60 || 8 || P82/EX2 ||  || {{pinio}} ||  || 0
| 60 || 8 || P82/EX2 ||  || ? ||  || 0
|-
|-
| 61 || 8 || P83/EX3 ||  || {{pinio}} ||  || 0
| 61 || 8 || P83/EX3 ||  || ? ||  || 0
|-
|-
| 62 || 8 || P84/EX4 ||  || {{pinio}} ||  || 0
| 62 || 8 || P84/EX4 ||  || ? ||  || 0
|-
|-
| 63 || 8 || P85/EX5 ||  || {{pinio}} ||  || 0
| 63 || 8 || P85/EX5 ||  || ? ||  || 0
|-
|-
| 64 || 8 || P86/EX6 ||  || {{pinio}} ||  || 0
| 64 || 8 || P86/EX6 ||  || ? ||  || 0
|-
|-
! colspan="7" style="padding:1px" data-sort-value="64.5"|
! colspan="7" style="padding:1px" data-sort-value="64.5"|
|-
|-
| 65 || 8 || P87/EX7 ||  || {{pinio}} ||  || 0
| 65 || 8 || P87/EX7 ||  || ? ||  || 0
|-
|-
| 66 || 3 || P30/INTP3/RTC1HZ ||  || {{pinio}} || || 0
| 66 || 3 || P30/INTP3/RTC1HZ ||  || ? || || 0
|-
|-
| 67 || 5 || P50/EX8 ||  || {{pinio}} ||  || 0
| 67 || 5 || P50/EX8 ||  || ? ||  || 0
|-
|-
| 68 || 5 || P51/EX9 ||  || {{pinio}} ||  || 0
| 68 || 5 || P51/EX9 ||  || ? ||  || 0
|-
|-
| 69 || 5 || P52/EX10 ||  || {{pinio}} ||  || 0
| 69 || 5 || P52/EX10 ||  || ? ||  || 0
|-
|-
| 70 || 5 || P53/EX11 ||  || {{pinio}} ||  || 0
| 70 || 5 || P53/EX11 ||  || ? ||  || 0
|-
|-
| 71 || 5 || P54/EX12 ||  || {{pinio}} ||  || 0
| 71 || 5 || P54/EX12 ||  || ? ||  || 0
|-
|-
| 72 || 5 || P55/EX13 ||  || {{pinio}} ||  || 0
| 72 || 5 || P55/EX13 ||  || ? ||  || 0
|-
|-
| 73 || 5 || P56/EX14 ||  || {{pinio}} ||  || 0
| 73 || 5 || P56/EX14 ||  || ? ||  || 0
|-
|-
| 74 || 5 || P57/EX15 ||  || {{pinio}} ||  || 0
| 74 || 5 || P57/EX15 ||  || ? ||  || 0
|-
|-
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} P17/EX31/TI02/TO02 ||  || {{pinio}} || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]] pin 5 || 0
| 75 || 1 || {{cellcolors|#33cc33|#ffffff}} <s>P17/EX31/TI02/</s>TO02 ||  || {{pino}} || Connected to [[RSX]] through voltage regulator [[Talk:Regulators | Mitsumi 810X]] pin 5 || 0
|-
|-
| 76 || 1 || {{cellcolors|#33f|#e77}} P16/EX30/TI01/TO01/INTP5 ||  || {{pini}} || Connected to [[RSX]] through a transistor (labeled ND and located near the RSX temperature monitor)<br>It seems to be some kind of ALERT signal (related with the signal from pin 48) || 3v @ standby (3.15)
| 76 || 1 || {{cellcolors|#33f|#e77}} P16/EX30/TI01/TO01/INTP5 ||  || ? || Connected to [[RSX]] through a transistor (labeled ND and located near the RSX temperature monitor)<br>It seems to be some kind of ALERT signal (related with the signal from pin 48) || 3v @ standby (3.15)
|-
|-
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || {{pinio}} ||  || 3v @ standby (3.3)
| 77 || 1 || P15/EX29/RTCDIV/RTCCL ||  || ? ||  || 3v @ standby (3.3)
|-
|-
| 78 || 1 || {{cellcolors|#aa7744}} RxD3 || SC_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] Connector pin 6 || 0
| 78 || 1 || {{cellcolors|#aa7744}} RxD3 || SC_RxD || {{pini}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 11 (UART-TTL terminal Receive) through a missing resistor<br>Connected to [[PCI]] Connector pin 6 || 0
Line 174: Line 174:
| 79 || 1 || {{cellcolors|#aa7744}} TxD3 || SC_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] Connector pin 4 || 3.3
| 79 || 1 || {{cellcolors|#aa7744}} TxD3 || SC_TxD || {{pino}} || Connected to [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] pin 10 (UART-TTL terminal Transmit) through a missing resistor<br>Connected to [[PCI]] Connector pin 4 || 3.3
|-
|-
| 80 || 1 || {{cellcolors|#33f|#fff}} SO00 || BE_SPI_DI || {{pino}} || Connected to [[CELL BE|CELL]] pad. (MOSI) Serial Output from Syscon Master to Cell Slave || 0
| 80 || 1 || {{cellcolors|#33f|#fff}} SO00 || BE_SPI_DO || {{pino}} || Connected to [[CELL BE|CELL]] pad. (MOSI) Serial Output from Syscon Master to Cell Slave || 0
|-
|-
| 81 || 1 || {{cellcolors|#33f|#fff}} SI00 || BE_SPI_DO || {{pini}} || Connected to [[CELL BE|CELL]] pad. (MISO) Serial Input from Cell Slave to Syscon Master || 1.2
| 81 || 1 || {{cellcolors|#33f|#fff}} SI00 || BE_SPI_DI || {{pini}} || Connected to [[CELL BE|CELL]] pad. (MISO) Serial Input from Cell Slave to Syscon Master || 1.2
|-
|-
| 82 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK || || Connected to [[CELL BE|CELL]] pad. 2.5 Mhz SPI Clock ||
| 82 || 1 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK || {{pino}} || Connected to [[CELL BE|CELL]] pad. 2.5 Mhz SPI Clock ||
|-
|-
| 83 || 9 || {{cellcolors|#33f|#fff}} P90 || /BE_SPI_CS || {{pinio}} || Connected to [[CELL BE|CELL]] pad. Chip Select || 2.0
| 83 || 9 || {{cellcolors|#33f|#fff}} P90 || BE_SPI_CS || {{pino}} || Connected to [[CELL BE|CELL]] pad. Chip Select || 2.0
|-
|-
| 84 || 9 || P91/EX33 ||  || {{pinio}} ||  || 3v @ standby
| 84 || 9 || P91/EX33 ||  || ? ||  || 3v @ standby
|-
|-
| 85 || 9 || P92/EX34 ||  || {{pinio}} ||  || 0
| 85 || 9 || P92/EX34 ||  || ? ||  || 0
|-
|-
| 86 || 9 || P93/EX35 ||  || {{pinio}} ||  || 0
| 86 || 9 || P93/EX35 ||  || ? ||  || 0
|-
|-
| 87 || 9 || {{cellcolors|#33f|#fff}} P94 ||  || {{pinio}} || Connected to [[RSX]] pad AW8 ? (RSX_SPI_CS). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8]] || 0
| 87 || 9 || {{cellcolors|#33f|#fff}} P94 ||  || {{pino}} || Connected to [[RSX]] pad AW8 ? (RSX_SPI_CS). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AW8]] || 0
|-
|-
| 88 || 9 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK11</span> ||  || {{pinio}} || Connected to [[RSX]] pad AY8 ? (RSX_SPI_CLK ). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8]] || 0
| 88 || 9 || {{cellcolors|#33f|#fff}} <span style="text-decoration: overline;">SCK11</span> ||  || {{pino}} || Connected to [[RSX]] pad AY8 ? (RSX_SPI_CLK ). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad AY8]] || 0
|-
|-
| 89 || 9 || {{cellcolors|#33f|#fff}} SI11 ||  || {{pinio}} || Connected to [[RSX]] pad BA7 ? (RSX_SPI_DI). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7]] || 0
| 89 || 9 || {{cellcolors|#33f|#fff}} SI11 ||  || {{pini}} || Connected to [[RSX]] pad BA7 ? (RSX_SPI_DI). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA7]] || 0
|-
|-
| 90 || 9 || {{cellcolors|#33f|#fff}} SO11 ||  || {{pinio}} || Connected to [[RSX]] pad BS6 ? (RSX_SPI_DO). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6]] || 0
| 90 || 9 || {{cellcolors|#33f|#fff}} SO11 ||  || {{pino}} || Connected to [[RSX]] pad BS6 ? (RSX_SPI_DO). See: [[Template:RSX pad layout 41x41]] and [[Media:RSX_SKEMA.jpg|pad BA6]] || 0
|-
|-
| 91 || 11 || P112 ||  || {{pinio}} ||  || 0
| 91 || 11 || P112 ||  || ? ||  || 0
|-
|-
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || {{pinio}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near FLASH) || 0
| 92 || 11 || {{cellcolors|#33cc33|#ffffff}} P113 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near FLASH) || 0
|-
|-
| 93 || 11 || P114 ||  || {{pinio}} ||  || 0
| 93 || 11 || P114 ||  || ? ||  || 0
|-
|-
| 94 || 11 || P115 ||  || {{pinio}} || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 33N AE6, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
| 94 || 11 || P115 ||  || ? || Connected to xxxxxxxxxxxxxx through <abbr title="Labeled 33N AE6, located at the opposite side of the clock generator texas-instrument CDC972">transistor</abbr> || 0
|-
|-
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || {{pinio}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near USB) || 0
| 95 || 11 || {{cellcolors|#33cc33|#ffffff}} P116 ||  || {{pino}} || Connected to voltage regulator [[Talk:Regulators | BD3527]] pin 12 (located near USB) || 0
|-
|-
| 96 || 11 || {{cellcolors|#339933|#ffffff}} P117 || AV_EN || {{pino}} ||  Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 3 (+5V output) through a <abbr title="Labeled 5A KC">transistor</abbr> || 0
| 96 || 11 || {{cellcolors|#339933|#ffffff}} P117 || AV_EN || {{pino}} ||  Connected to [[MultiAV]] [[Connectors#AV_Multi_Out_pinout_-_CN2401_12P|connector]] pin 3 (+5V output) through a <abbr title="Labeled 5A KC">transistor</abbr> || 0
Line 218: Line 218:
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  || 0
| 101 ||  || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || {{pin}} ||  || 0
|-
|-
| 102 || 15 || {{cellcolors|#c0c0c0}} <s>P157/</s>ANI15 || ANI15_DOWN || {{pini}} || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
| 102 || 15 || {{cellcolors|#c0c0c0}} P157<s>/ANI15</s> || P157_DOWN || {{pin}} || 100k resistor to GND. And to a missing SMD component to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) <!-- Interesting, the circuit is designed to pull this pin up or down, is down by default but im wondering what does the pullup o0--> || 0
|-
|-
! colspan="7" style="padding:1px" data-sort-value="102.5"|
! colspan="7" style="padding:1px" data-sort-value="102.5"|
|-
|-
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || {{pini}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
| 103 || 15 || {{cellcolors|#c0c0c0}} <s>P156/</s>ANI14 || ANI14_UP || {{pin}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 0
|-
|-
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || {{pini}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
| 104 || 15 || {{cellcolors|#c0c0c0}} <s>P155/</s>ANI13 || ANI13_DOWN || {{pin}} || [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to 100k resistor to GND || 0
|- {{cellcolors|#eee}}
|- {{cellcolors|#eee}}
| 105 || 15 || <s>P154/ANI12</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
| 105 || 15 || <s>P154/ANI12</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
Line 234: Line 234:
| 108 || 15 || <s>P151/ANI9</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
| 108 || 15 || <s>P151/ANI9</s> ||  || {{pinnc}} || NOT_CONNECTED.  || 0
|-
|-
| 109 || 15 || {{cellcolors|#33f|#e77}} <s>P150/</s>ANI8 ||  || {{pini}} || Connected to [[CELL BE]] through a transistor (labeled ND and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal (inverted direction than the signal from pin 46)<br>And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
| 109 || 15 || {{cellcolors|#33f|#e77}} <s>P150/</s>ANI8 ||  || ? || Connected to [[CELL BE]] through a transistor (labeled ND and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal (inverted direction than the signal from pin 46)<br>And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
|-
|-
| 110 || 2 || {{cellcolors|#ffff88}} <s>P27/</s>ANI7 || POW_SW || {{pini}} || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3
| 110 || 2 || {{cellcolors|#ffff88}} <s>P27/</s>ANI7 || POW_SW || {{pini}} || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3
Line 240: Line 240:
| 111 || 2 || {{cellcolors|#ffff88}} <s>P26/</s>ANI6 || EJECT_SW || {{pini}} || Connected to [[switch boards|Switch board]] eject switch || 3v @ standby (3.3) 3.3
| 111 || 2 || {{cellcolors|#ffff88}} <s>P26/</s>ANI6 || EJECT_SW || {{pini}} || Connected to [[switch boards|Switch board]] eject switch || 3v @ standby (3.3) 3.3
|-
|-
| 112 || 2 || {{cellcolors|#d699ff|#ffffff}} P25/ANI5 || WIFI_DATA_1 || {{pinio}} || Connected to [[Wifi|Wifi/BT]] module || 0
| 112 || 2 || {{cellcolors|#d699ff|#ffffff}} P25/ANI5 || WIFI_DATA_1 || ? || Connected to [[Wifi|Wifi/BT]] module || 0
|-
|-
| 113 || 2 || {{cellcolors|#d699ff|#ffffff}} P24/ANI4 || WIFI_DATA_2 || {{pinio}} || Connected to [[Wifi|Wifi/BT]] module || 0
| 113 || 2 || {{cellcolors|#d699ff|#ffffff}} P24/ANI4 || WIFI_DATA_2 || ? || Connected to [[Wifi|Wifi/BT]] module || 0
|-
|-
| 114 || 2 || P23/ANI3 ||  || {{pinio}} ||  || 0
| 114 || 2 || P23/ANI3 ||  || ? ||  || 0
|-
|-
| 115 || 2 || {{cellcolors|#ffff88}} <s>P22/</s>ANI2 ||  || {{pini}} || Connected to [[Bluray Drive]] through 100ohm resistor array. [[Media:BD-460_boards_connectors.jpg|Pin 8 of the connector at left]], and to a testpad, see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
| 115 || 2 || {{cellcolors|#ffff88}} <s>P22/</s>ANI2 ||  || {{pini}} || Connected to [[Bluray Drive]] through 100ohm resistor array. [[Media:BD-460_boards_connectors.jpg|Pin 8 of the connector at left]], and to a testpad, see [[Template_talk:Syscon_pinout_LQFP_128_pins|talk page]] || 0
Line 256: Line 256:
| 119 || 13 || {{cellcolors|#339933|#ffffff}} P131<s>/TI06/TO06</s> || HDMI_EN || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] (primary and secondary power inputs) through voltage regulator [[Talk:Regulators|348A]] pins 2 and 7<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr> || 3v @ standby (3.3)
| 119 || 13 || {{cellcolors|#339933|#ffffff}} P131<s>/TI06/TO06</s> || HDMI_EN || {{pino}} || Connected to [[HDMI]] controller [[MN8647091]] (primary and secondary power inputs) through voltage regulator [[Talk:Regulators|348A]] pins 2 and 7<br>Connected to [[HDMI]] [[Connectors#HDMI_Out|connector]] pin 18 (+5V output) through a <abbr title="Labeled AROKE, located next to the HDMI connector, it have a thick copper trace for a voltage of the HDMI connector)>transistor</abbr> || 3v @ standby (3.3)
|-
|-
| 120 || 0 || P07 ||  || {{pinio}} ||  || 0
| 120 || 0 || P07 ||  || ? ||  || 0
|-
|-
| 121 || 0 || {{cellcolors|#77f|#ff0}} SCL10 || DVE_I2C_SCL || {{pinio}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 35 || 0
| 121 || 0 || {{cellcolors|#77f|#ff0}} SCL10 || DVE_I2C_SCL || {{pino}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 35 || 0
|-
|-
| 122 || 0 || {{cellcolors|#77f|#ff0}} SDA10 || DVE_I2C_SDA || {{pinio}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 36 || 0
| 122 || 0 || {{cellcolors|#77f|#ff0}} SDA10 || DVE_I2C_SDA || {{pinio}} || Connected to [[MultiAV|Digital Video Encoder]] [[CXM4027R]] pin 36 || 0
|-
|-
| 123 || 0 || P02/SO10/TxD1 ||  || {{pinio}} ||  || 0
| 123 || 0 || P02/SO10/TxD1 ||  || ? ||  || 0
|-
|-
| 124 || 0 || P01/TO00 ||  || {{pinio}} || Connected to [[HDMI]] controller [[MN8647091]] pin 93 || 0
| 124 || 0 || P01/TO00 ||  || ? || Connected to [[HDMI]] controller [[MN8647091]] pin 93 || 0
|-
|-
| 125 || 0 || P00/TI00 ||  || {{pinio}} ||  || 0
| 125 || 0 || P00/TI00 ||  || ? ||  || 0
|-
|-
| 126 || 14 || {{cellcolors|#246|#fff}} <s>P145/TI07/</s>TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
| 126 || 14 || {{cellcolors|#246|#fff}} <s>P145/TI07/</s>TO07 || FANPWM0 || {{pino}} || Connected to the [[Cooling|FAN]] grey wire (PWM duty) || 0
|-
|-
| 127 || 14 || P144/SO20/TxD2 ||  || {{pinio}} ||  || 0
| 127 || 14 || P144/SO20/TxD2 ||  || ? ||  || 0
|-
|-
| 128 || 14 || {{cellcolors|#77f|#ff0}} SDA20 || HDMI_I2C_SDA ? || {{pinio}} || Connected to [[HDMI]] controller [[MN8647091]] pin 29 || 0
| 128 || 14 || {{cellcolors|#77f|#ff0}} SDA20 || HDMI_I2C_SDA ? || {{pinio}} || Connected to [[HDMI]] controller [[MN8647091]] pin 29 || 0
|}</div><noinclude>[[Category:Templates]]</noinclude>
|}</div><noinclude>[[Category:Templates]]</noinclude>

Revision as of 02:32, 19 March 2022


Pinout

Syscon pinout LQFP 128 pins
NEC/Renesas 78K0R/KH3 Optional pin configurations

Syscon SW2-303 unsoldered
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW2-303
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW-301
CECHLxx with VER-001 motherboard
[ View ], [ Discuss ] or [ Edit ]
Syscon pinout LQFP 128 pins
[ View ], [ Discuss ] or [ Edit ]
Pin Port Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 14 SCL20 HDMI_I2C_SCL ?
Out
 Connected to HDMI controller MN8647091 pin 27 0
2 14 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT
In
 Connected to South Bridge CXD9963GB pad D1 through a resistor ~1V @ standby (0 V?)
3 14 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION
In
 Connected to CELL pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 12 EXLVI
Others
 Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 3 P37 POW_LED
Out
 Connected to Switch board dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) 0
6 3 P36 STBY_LED
Out
 Connected to Switch board dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) 3v @ standby (3.3V)
7 3 P35 ? Connected to South Bridge CXD9963GB pad AA18 0
8 3 P34 ? Connected to South Bridge CXD9963GB pad AA17 0
9 3 P33 ? CELL BE related? 0
10 3 P32 ? 0
11 16 P163/TI13/TO13 BACK_LEDS
Out
 Connected to Switch board backlit LEDs through a transistor 0
12 16 P162/TI12/TO12 SW_PWM ?
Out
 Connected to Switch board contour LEDs through a transistor 0
13 16 P161/TI11/TO11
Not Connected
 NOT_CONNECTED. Floating through a missing SMD component. See: NOWHERE 0
14 16 P160/TI10/TO10
Not Connected
 NOT_CONNECTED. Floating through a missing SMD component at the other side of the board. See: VIA 0
15 4 P47/INTP2 BT_WAKEON ?
In
 Connected to Wifi/BT module 0
16 4 P46/INTP1/TI05/TO05 BUZZER
Out
 Connected to the Buzzer through a transistor 0
17 4 SO01
Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_DO) 0
18 4 SI01
In
 Connected to South Bridge CXD9963GB ? (SB_SPI_DI) 3v @ standby
19 4 SCK01
Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_CLK) 0
20 4 P42
Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_CS) 0
21 4 TOOL1 TOOL_CLK ? Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor 3.0
22 4 TOOL0 TOOL_DAT
In/Out
 Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor 0
23 12 P127/SO21 ? 0
24 12 SDA21 THR_I2C_SDA
In/Out
 Connected to Temperature Monitors pin 7 (SMBus data) 3v @ standby (3.15)
25 12 SCL21 THR_I2C_SCL
Out
 Connected to Temperature Monitors pin 8 (SMBus clock) 3v @ standby (3.15)
26 RESET RESET
In
 Connected to Service Connector 3rd Gen. pin 9 through a missing resistor
Connected to standby voltage regulator 463A pin 3
27 12 XT2 XT_SUB/OSCOUT ?
In
 Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
28 12 XT1 XT_SUB/OSCIN ?
In
 Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
29 FLMD0 FLASH_MODE
In
 Connected to Service Connector 3rd Gen. pin 8 (Flash programming mode) through a missing resistor 3.33
30 12 X2 XT_MAIN/XTAL ?
In
 Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 0.8v @ standby (1.1)
31 12 X1 XT_MAIN/EXTAL ?
In
 Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 2.2v @ standby (2.4)
32 REGC VREG_CAP
Others
 Connected to battery+ through 2 diodes
Connected to a capacitor (internal voltage regulator, around 1uF) at the other side of the board. See: VIA
33 VSS0 GND
Others
 0
34 EVSS0 GND
Others
 0
35 VDD 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
37 6 SCL0 MK_I2C_SCL
Out
 Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 0.2v @ standby
38 6 SDA0 MK_I2C_SDA
In/Out
 Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 38 0.2v @ standby
39 6 P62 ? 0
40 6 P63 P63_DOWN
Others
 10K resistor to GND 0
41 3 P31/TI03/TO03/INTP4 ACIN_DET
In
 Connected to Power Supply control connector pin 4 through a transistor. See: schematic 3v @ standby (3.3)
42 6 P64/RD
Out
 Connected to voltage regulator BD9684 0906 pin 4 (enable something) through some undocumented components 0
43 6 WR0 ? Connected to Service Connector 3rd Gen. pin 12 through a missing resistor 3.0
44 6 P66/WR1 ? 0
45 6 P67/ASTB
Not Connected
 NOT_CONNECTED. 0
46 7 P77/EX23/KR7/INTP11 ? Connected to CELL BE through a transistor (labeled 26 and located near the CELL temperature monitor)
It seems to be some kind of ALERT signal (inverted direction than the signal from pin 109)		 0
47 7 P76/EX22/KR6/INTP10 ? 3v @ standby (3.15)
48 7 P75/EX21/KR5/INTP9 ? Connected to RSX through a transistor (labeled ND and located near the RSX temperature monitor)
It seems to be some kind of ALERT signal (related with the signal from pin 76)		 3v @ standby (3.15)
49 7 P74/EX20/KR4/INTP8 P74_DOWN
Others
 10K resistor to GND 0
50 7 KR3 ? Connected to Service Connector 3rd Gen. pin 3
Connected to voltage regulator D35653 0S25 (FLASH_ENABLE ?)		 0
51 7 P72/EX18/KR2 ? Connected to xxxxxxxxxxxxxx through transistor 0
52 7 P71/EX17/KR1
Out
 Connected to voltage regulator BD3525 pin 12 (enable something) 0
53 7 P70/EX16/KR0 ? 0
54 0 P06/WAIT P06_DOWN
Others
 45K resistor array to GND 0
55 0 P05/CLKOUT P05_DOWN
Others
 45K resistor array to GND 0
56 EVSS1 GND
Others
 0
57 EVDD1 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
58 8 P80/EX0 ? 0
59 8 P81/EX1 ? 0
60 8 P82/EX2 ? 0
61 8 P83/EX3 ? 0
62 8 P84/EX4 ? 0
63 8 P85/EX5 ? 0
64 8 P86/EX6 ? 0
65 8 P87/EX7 ? 0
66 3 P30/INTP3/RTC1HZ ? 0
67 5 P50/EX8 ? 0
68 5 P51/EX9 ? 0
69 5 P52/EX10 ? 0
70 5 P53/EX11 ? 0
71 5 P54/EX12 ? 0
72 5 P55/EX13 ? 0
73 5 P56/EX14 ? 0
74 5 P57/EX15 ? 0
75 1 P17/EX31/TI02/TO02
Out
 Connected to RSX through voltage regulator Mitsumi 810X pin 5 0
76 1 P16/EX30/TI01/TO01/INTP5 ? Connected to RSX through a transistor (labeled ND and located near the RSX temperature monitor)
It seems to be some kind of ALERT signal (related with the signal from pin 48)		 3v @ standby (3.15)
77 1 P15/EX29/RTCDIV/RTCCL ? 3v @ standby (3.3)
78 1 RxD3 SC_RxD
In
 Connected to Service Connector 3rd Gen. pin 11 (UART-TTL terminal Receive) through a missing resistor
Connected to PCI Connector pin 6		 0
79 1 TxD3 SC_TxD
Out
 Connected to Service Connector 3rd Gen. pin 10 (UART-TTL terminal Transmit) through a missing resistor
Connected to PCI Connector pin 4		 3.3
80 1 SO00 BE_SPI_DO
Out
 Connected to CELL pad. (MOSI) Serial Output from Syscon Master to Cell Slave 0
81 1 SI00 BE_SPI_DI
In
 Connected to CELL pad. (MISO) Serial Input from Cell Slave to Syscon Master 1.2
82 1 SCK00 BE_SPI_CLK
Out
 Connected to CELL pad. 2.5 Mhz SPI Clock
83 9 P90 BE_SPI_CS
Out
 Connected to CELL pad. Chip Select 2.0
84 9 P91/EX33 ? 3v @ standby
85 9 P92/EX34 ? 0
86 9 P93/EX35 ? 0
87 9 P94
Out
 Connected to RSX pad AW8 ? (RSX_SPI_CS). See: Template:RSX pad layout 41x41 and pad AW8 0
88 9 SCK11
Out
 Connected to RSX pad AY8 ? (RSX_SPI_CLK ). See: Template:RSX pad layout 41x41 and pad AY8 0
89 9 SI11
In
 Connected to RSX pad BA7 ? (RSX_SPI_DI). See: Template:RSX pad layout 41x41 and pad BA7 0
90 9 SO11
Out
 Connected to RSX pad BS6 ? (RSX_SPI_DO). See: Template:RSX pad layout 41x41 and pad BA6 0
91 11 P112 ? 0
92 11 P113
Out
 Connected to voltage regulator BD3527 pin 12 (located near FLASH) 0
93 11 P114 ? 0
94 11 P115 ? Connected to xxxxxxxxxxxxxx through transistor 0
95 11 P116
Out
 Connected to voltage regulator BD3527 pin 12 (located near USB) 0
96 11 P117 AV_EN
Out
 Connected to MultiAV connector pin 3 (+5V output) through a transistor 0
97 AVREF1 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
98 11 P110/ANO0
Not Connected
 NOT_CONNECTED. 0
99 11 P111/ANO1
Not Connected
 NOT_CONNECTED. 0
100 AVREF0 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
101 AVSS0 GND
Others
 0
102 15 P157/ANI15 P157_DOWN
Others
 100k resistor to GND. And to a missing SMD component to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
103 15 P156/ANI14 ANI14_UP
Others
 VIA to 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
104 15 P155/ANI13 ANI13_DOWN
Others
 VIA to 100k resistor to GND 0
105 15 P154/ANI12
Not Connected
 NOT_CONNECTED. 0
106 15 P153/ANI11
Not Connected
 NOT_CONNECTED. 0
107 15 P152/ANI10
Not Connected
 NOT_CONNECTED. 0
108 15 P151/ANI9
Not Connected
 NOT_CONNECTED. 0
109 15 P150/ANI8 ? Connected to CELL BE through a transistor (labeled ND and located near the CELL temperature monitor)
It seems to be some kind of ALERT signal (inverted direction than the signal from pin 46)
And to 10k resistor to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A)		 3v @ standby
110 2 P27/ANI7 POW_SW
In
 Connected to Switch board power switch 3v @ standby (3.3) 3.3
111 2 P26/ANI6 EJECT_SW
In
 Connected to Switch board eject switch 3v @ standby (3.3) 3.3
112 2 P25/ANI5 WIFI_DATA_1 ? Connected to Wifi/BT module 0
113 2 P24/ANI4 WIFI_DATA_2 ? Connected to Wifi/BT module 0
114 2 P23/ANI3 ? 0
115 2 P22/ANI2
In
 Connected to Bluray Drive through 100ohm resistor array. Pin 8 of the connector at left, and to a testpad, see talk page 0
116 2 P21/ANI1
In
 Connected to Bluray Drive through 100ohm resistor array. Pin 7 of the connector at left, and to a testpad, see talk page 0
117 2 P20/ANI0
In
 Connected to Bluray Drive through 100ohm resistor array. Pin 6 of the connector at left, and to a testpad, see talk page (0V?)
118 13 P130 ACDC_STBY
Out
 Connected to Power Supply control connector pin 3 through a 2K2ohm resistor. See: schematic 3v @ standby (3.3)
119 13 P131/TI06/TO06 HDMI_EN
Out
 Connected to HDMI controller MN8647091 (primary and secondary power inputs) through voltage regulator 348A pins 2 and 7
Connected to HDMI connector pin 18 (+5V output) through a transistor		 3v @ standby (3.3)
120 0 P07 ? 0
121 0 SCL10 DVE_I2C_SCL
Out
 Connected to Digital Video Encoder CXM4027R pin 35 0
122 0 SDA10 DVE_I2C_SDA
In/Out
 Connected to Digital Video Encoder CXM4027R pin 36 0
123 0 P02/SO10/TxD1 ? 0
124 0 P01/TO00 ? Connected to HDMI controller MN8647091 pin 93 0
125 0 P00/TI00 ? 0
126 14 P145/TI07/TO07 FANPWM0
Out
 Connected to the FAN grey wire (PWM duty) 0
127 14 P144/SO20/TxD2 ? 0
128 14 SDA20 HDMI_I2C_SDA ?
In/Out
 Connected to HDMI controller MN8647091 pin 29 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=66043"