Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 104: Line 104:
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> ||  || {{pin}} || NOT_CONNECTED.  || 0
| 45 || 6 || {{cellcolors|#e0e0e0}} <s>P67/ASTB</s> ||  || {{pin}} || NOT_CONNECTED.  || 0
|-
|-
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || {{pinio}} || || 0
| 46 || 7 || P77/EX23/KR7/INTP11 ||  || {{pinio}} || Connected to [[CELL BE]] through a transistor (labeled 26 and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal || 0
|-
|-
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || {{pinio}} ||  || 3v @ standby (3.15)
| 47 || 7 || P76/EX22/KR6/INTP10 ||  || {{pinio}} ||  || 3v @ standby (3.15)
Line 234: Line 234:
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> ||  || {{pin}} || NOT_CONNECTED.  || 0
| 108 || 15 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> ||  || {{pin}} || NOT_CONNECTED.  || 0
|-
|-
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || {{pini}} || Connected to [[CELL BE]] through a transistor (labeled ND and located near the temperature monitor)<br>It seems to be some kind of ALERT signal<br>And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
| 109 || 15 || {{cellcolors|#c0c0c0}} <s>P150/</s>ANI8 || ANI8_UP_UNK || {{pini}} || Connected to [[CELL BE]] through a transistor (labeled ND and located near the CELL temperature monitor)<br>It seems to be some kind of ALERT signal<br>And to 10k resistor to [[Media:Syscon_SW2-303_Unsoldered.JPG|VIA]] to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_A) || 3v @ standby
|-
|-
| 110 || 2 || {{cellcolors|#ffff88}} <s>P27/</s>ANI7 || POW_SW || {{pini}} || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3
| 110 || 2 || {{cellcolors|#ffff88}} <s>P27/</s>ANI7 || POW_SW || {{pini}} || Connected to [[switch boards|Switch board]] power switch || 3v @ standby (3.3) 3.3

Revision as of 06:41, 18 March 2022


Pinout

Syscon pinout LQFP 128 pins
NEC/Renesas 78K0R/KH3 Optional pin configurations

Syscon SW2-303 unsoldered
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW2-303
CECH-25xx with JTP-001 or JSD-001 motherboard

Syscon SW-301
CECHLxx with VER-001 motherboard
[ View ], [ Discuss ] or [ Edit ]
Syscon pinout LQFP 128 pins
[ View ], [ Discuss ] or [ Edit ]
Pin Port Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 14 P142/SCK20/SCL20 HDMI_I2C_SCL ?
In
 Connected to HDMI controller MN8647091 pin 27 0
2 14 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT
In
 Connected to South Bridge CXD9963GB pad D1 through a resistor ~1V @ standby (0 V?)
3 14 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION
In
 Connected to CELL pad BA17 through a NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 12 P120/INTP0/EXLVI
In/Out
 Connected to +12V_MAIN through a resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 3 P37 POW_LED
Out
 Connected to Switch board dual led (Green) through a dual digital NPN transistor EMH1(SOT-563) 0
6 3 P36 STBY_LED
Out
 Connected to Switch board dual led (Red) through a dual digital NPN transistor EMH1(SOT-563) 3v @ standby (3.3V)
7 3 P35
In/Out
 Connected to South Bridge CXD9963GB pad AA18 0
8 3 P34
In/Out
 Connected to South Bridge CXD9963GB pad AA17 0
9 3 P33
In/Out
 CELL BE related? 0
10 3 P32
In/Out
 0
11 16 P163/TI13/TO13 BACK_LEDS
Out
 Connected to Switch board backlit LEDs through a transistor 0
12 16 P162/TI12/TO12 SW_PWM ?
Out
 Connected to Switch board contour LEDs through a transistor 0
13 16 P161/TI11/TO11
Others
 NOT_CONNECTED. Floating through a missing SMD component. See: NOWHERE 0
14 16 P160/TI10/TO10
Others
 NOT_CONNECTED. Floating through a missing SMD component at the other side of the board. See: VIA 0
15 4 P47/INTP2 BT_WAKEON ?
In/Out
 Connected to Wifi/BT module 0
16 4 P46/INTP1/TI05/TO05 BUZZER
Out
 Connected to the Buzzer through a transistor 0
17 4 P45/SO01
In/Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_DO) 0
18 4 P44/SI01
In/Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_DI) 3v @ standby
19 4 P43/SCK01
In/Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_CLK) 0
20 4 P42/TI04/TO04
In/Out
 Connected to South Bridge CXD9963GB ? (SB_SPI_CS) 0
21 4 P41/TOOL1 TOOL_CLK
Out
 Connected to Service Connector 3rd Gen. pin 13 (Tool clock) through a missing resistor 3.0
22 4 P40/TOOL0 TOOL_DAT
In/Out
 Connected to Service Connector 3rd Gen. pin 7 (Tool Data) through a missing resistor 0
23 12 P127/SO21
In/Out
 0
24 12 P126/SI21/SDA21 THR_I2C_SDA
In/Out
 Connected to Temperature Monitors pin 7 (SMBus data) 3v @ standby (3.15)
25 12 P125/SCK21/SCL21 THR_I2C_SCL
Out
 Connected to Temperature Monitors pin 8 (SMBus clock) 3v @ standby (3.15)
26 RESET RESET
In
 Connected to Service Connector 3rd Gen. pin 9 through a missing resistor
Connected to standby voltage regulator 463A pin 3
27 12 P124/XT2 XT_SUB/OSCOUT ?
In
 Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
28 12 P123/XT1 XT_SUB/OSCIN ?
In
 Connected to a crystal (Subsystem clock). CLK -> 1-2V Amplitude (32.768Khz)
29 FLMD0 FLASH_MODE
Others
 Connected to Service Connector 3rd Gen. pin 8 (Flash programming mode) through a missing resistor 3.33
30 12 P122/X2/EXCLK XT_MAIN/XTAL ?
In
 Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 0.8v @ standby (1.1)
31 12 P121/X1 XT_MAIN/EXTAL ?
In
 Connected to a crystal (Main system clock) marked "EX" (16.9344Mhz?) 2.2v @ standby (2.4)
32 REGC VREG_CAP
Others
 Connected to battery+ through 2 diodes
Connected to a capacitor (internal voltage regulator, around 1uF) at the other side of the board. See: VIA
33 VSS0 GND
Others
 0
34 EVSS0 GND
Others
 0
35 VDD 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
37 6 P60/SCL0 MK_I2C_SCL
In/Out
 Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 37 0.2v @ standby
38 6 P61/SDA0 MK_I2C_SDA
In/Out
 Connected to Texas Instruments-SCEI Clock Generator CDC972 pin 38 0.2v @ standby
39 6 P62
In/Out
 0
40 6 P63 P63_DOWN
In
 10K resistor to GND 0
41 3 P31/TI03/TO03/INTP4 ACIN_DET
In
 Connected to Power Supply control connector pin 4 through a transistor. See: schematic 3v @ standby (3.3)
42 6 P64/RD
In/Out
 Connected to voltage regulator BD9684 0906 pin 4 (enable something) through some undocumented components 0
43 6 P65/WR0
In/Out
 Connected to Service Connector 3rd Gen. pin 12 through a missing resistor 3.0
44 6 P66/WR1
In/Out
 0
45 6 P67/ASTB
Others
 NOT_CONNECTED. 0
46 7 P77/EX23/KR7/INTP11
In/Out
 Connected to CELL BE through a transistor (labeled 26 and located near the CELL temperature monitor)
It seems to be some kind of ALERT signal		 0
47 7 P76/EX22/KR6/INTP10
In/Out
 3v @ standby (3.15)
48 7 P75/EX21/KR5/INTP9
In/Out
 3v @ standby (3.15)
49 7 P74/EX20/KR4/INTP8 INTP8_DOWN
In
 10K resistor to GND 0
50 7 P73/EX19/KR3
In/Out
 Connected to Service Connector 3rd Gen. pin 3
Connected to voltage regulator D35653 0S25 (FLASH_ENABLE ?)		 0
51 7 P72/EX18/KR2
In/Out
 Connected to xxxxxxxxxxxxxx through transistor 0
52 7 P71/EX17/KR1
In/Out
 Connected to voltage regulator BD3525 pin 12 (enable something) 0
53 7 P70/EX16/KR0
In/Out
 0
54 0 P06/WAIT P06_DOWN
In/Out
 45K resistor array to GND 0
55 0 P05/CLKOUT P05_DOWN
In/Out
 45K resistor array to GND 0
56 EVSS1 GND
Others
 0
57 EVDD1 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
58 8 P80/EX0
In/Out
 0
59 8 P81/EX1
In/Out
 0
60 8 P82/EX2
In/Out
 0
61 8 P83/EX3
In/Out
 0
62 8 P84/EX4
In/Out
 0
63 8 P85/EX5
In/Out
 0
64 8 P86/EX6
In/Out
 0
65 8 P87/EX7
In/Out
 0
66 3 P30/INTP3/RTC1HZ
In/Out
 0
67 5 P50/EX8
In/Out
 0
68 5 P51/EX9
In/Out
 0
69 5 P52/EX10
In/Out
 0
70 5 P53/EX11
In/Out
 0
71 5 P54/EX12
In/Out
 0
72 5 P55/EX13
In/Out
 0
73 5 P56/EX14
In/Out
 0
74 5 P57/EX15
In/Out
 0
75 1 P17/EX31/TI02/TO02
In/Out
 Connected to voltage regulator Mitsumi 040 810X pin 5 0
76 1 P16/EX30/TI01/TO01/INTP5
In/Out
 3v @ standby (3.15)
77 1 P15/EX29/RTCDIV/RTCCL
In/Out
 3v @ standby (3.3)
78 1 P14/EX28/RxD3 SC_RxD
In
 Connected to Service Connector 3rd Gen. pin 11 (UART-TTL terminal Receive) through a missing resistor
Connected to PCI Connector pin 6		 0
79 1 P13/EX27/TxD3 SC_TxD
Out
 Connected to Service Connector 3rd Gen. pin 10 (UART-TTL terminal Transmit) through a missing resistor
Connected to PCI Connector pin 4		 3.3
80 1 P12/EX26/SO00/TxD0 BE_SPI_DI
Out
 Connected to CELL pad. (MOSI) Serial Output from Syscon Master to Cell Slave 0
81 1 P11/EX25/SI00/RxD0 BE_SPI_DO
In
 Connected to CELL pad. (MISO) Serial Input from Cell Slave to Syscon Master 1.2
82 1 P10/EX24/SCK00 BE_SPI_CLK Connected to CELL pad. 2.5 Mhz SPI Clock
83 9 P90/EX32 /BE_SPI_CS
In/Out
 Connected to CELL pad. Chip Select 2.0
84 9 P91/EX33
In/Out
 3v @ standby
85 9 P92/EX34
In/Out
 0
86 9 P93/EX35
In/Out
 0
87 9 P94
In/Out
 Connected to RSX pad AW8 ? (RSX_SPI_CS). See: Template:RSX pad layout 41x41 and pad AW8 0
88 9 P95/SCK11/SCL11
In/Out
 Connected to RSX pad AY8 ? (RSX_SPI_CLK ). See: Template:RSX pad layout 41x41 and pad AY8 0
89 9 P96/SI11/SDA11
In/Out
 Connected to RSX pad BA7 ? (RSX_SPI_DI). See: Template:RSX pad layout 41x41 and pad BA7 0
90 9 P97/SO11
In/Out
 Connected to RSX pad BS6 ? (RSX_SPI_DO). See: Template:RSX pad layout 41x41 and pad BA6 0
91 11 P112
In/Out
 0
92 11 P113
In/Out
 Connected to voltage regulator BD3527 pin 12 (located near FLASH) 0
93 11 P114
In/Out
 0
94 11 P115
In/Out
 Connected to xxxxxxxxxxxxxx through transistor 0
95 11 P116
In/Out
 Connected to voltage regulator BD3527 pin 12 (located near USB) 0
96 11 P117 AV_EN
Out
 Connected to MultiAV connector pin 3 (+5V output) through a transistor 0
97 AVREF1 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
98 11 P110/ANO0
Others
 NOT_CONNECTED. 0
99 11 P111/ANO1
Others
 NOT_CONNECTED. 0
100 AVREF0 3.3_EVER_B
Others
 Connected to standby voltage regulator 463A pin 2 3v @ standby (3.3)
101 AVSS0 GND
Others
 0
102 15 P157/ANI15 ANI15_DOWN
In
 100k resistor to GND. And to a missing SMD component to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
103 15 P156/ANI14 ANI14_UP
In
 VIA to 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_A) 0
104 15 P155/ANI13 ANI13_DOWN
In
 VIA to 100k resistor to GND 0
105 15 P154/ANI12
Others
 NOT_CONNECTED. 0
106 15 P153/ANI11
Others
 NOT_CONNECTED. 0
107 15 P152/ANI10
Others
 NOT_CONNECTED. 0
108 15 P151/ANI9
Others
 NOT_CONNECTED. 0
109 15 P150/ANI8 ANI8_UP_UNK
In
 Connected to CELL BE through a transistor (labeled ND and located near the CELL temperature monitor)
It seems to be some kind of ALERT signal
And to 10k resistor to VIA to pin 8 of voltage regulator 463A (3.3_EVER_A)		 3v @ standby
110 2 P27/ANI7 POW_SW
In
 Connected to Switch board power switch 3v @ standby (3.3) 3.3
111 2 P26/ANI6 EJECT_SW
In
 Connected to Switch board eject switch 3v @ standby (3.3) 3.3
112 2 P25/ANI5 WIFI_DATA_1
In/Out
 Connected to Wifi/BT module 0
113 2 P24/ANI4 WIFI_DATA_2
In/Out
 Connected to Wifi/BT module 0
114 2 P23/ANI3
In/Out
 0
115 2 P22/ANI2
In/Out
 0
116 2 P21/ANI1
In/Out
 0
117 2 P20/ANI0
In/Out
 (0V?)
118 13 P130 ACDC_STBY
Out
 Connected to Power Supply control connector pin 3 through a 2K2ohm resistor. See: schematic 3v @ standby (3.3)
119 13 P131/TI06/TO06 HDMI_EN
Out
 Connected to HDMI controller MN8647091 (primary and secondary power inputs) through voltage regulator 348A pins 2 and 7
Connected to HDMI connector pin 18 (+5V output) through a transistor		 3v @ standby (3.3)
120 0 P07
In/Out
 0
121 0 P04/SCK10/SCL10 DVE_I2C_SCL
In/Out
 Connected to Digital Video Encoder CXM4027R pin 35 0
122 0 P03/SI10/RxD1/SDA10 DVE_I2C_SDA
In/Out
 Connected to Digital Video Encoder CXM4027R pin 36 0
123 0 P02/SO10/TxD1
In/Out
 0
124 0 P01/TO00
In/Out
 Connected to HDMI controller MN8647091 pin 93 0
125 0 P00/TI00
In/Out
 0
126 14 P145/TI07/TO07 FANPWM0
Out
 Connected to the FAN grey wire (PWM duty) 0
127 14 P144/SO20/TxD2
In/Out
 0
128 14 P143/SI20/RxD2/SDA20 HDMI_I2C_SDA ?
In/Out
 Connected to HDMI controller MN8647091 pin 29 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=66022"