Template:DSW-001 pinout: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 9: | Line 9: | ||
| 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED. | | 2 || SW_PWM ? || {{cellcolors|darkgrey|white}} Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 12 || {{cellcolors|darkgrey|white}}4x CONTOUR LEDs || {{cellcolors|darkgrey|white}} Permanently inactive by default.<br />On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED. | ||
|- | |- | ||
| rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds | | rowspan="2" | 3 || rowspan="2" | ? || rowspan="2" | Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 11 || 2x White leds - || Inner LEDs for EJECT button backlight | ||
|- | |- | ||
| 2x White leds | | 2x White leds - || Inner LEDs for POWER button backlight | ||
|- | |- | ||
| 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate. | | 4 || POW_SW || Syscon [[Template:Syscon_pinout_LQFP_128_pins|SW2-30x]], pin 110 || Power switch {{buttonpower}} || Sink to ground to activate. | ||
Revision as of 15:26, 5 December 2021
| Pin | Name | Connected to | Description | |
|---|---|---|---|---|
| On Motherboard | On Switch board | |||
| 1 | RMC_IN ? | Syscon SW2-30x, pin 13 | Testpad | Only This line have a Testpad @ switchboard, seems that it is a service pin. Also connected to a pin of a Service Connectors ? |
| 2 | SW_PWM ? | Syscon SW2-30x, pin 12 | 4x CONTOUR LEDs | Permanently inactive by default. On Switch board is connected to a transistor driving 3 LEDs: TWO BLUE AND ONE RED. |
| 3 | ? | Syscon SW2-30x, pin 11 | 2x White leds - | Inner LEDs for EJECT button backlight |
| 2x White leds - | Inner LEDs for POWER button backlight | |||
| 4 | POW_SW | Syscon SW2-30x, pin 110 | Power switch  |
Sink to ground to activate. |
| 5 | EJECT_SW | Syscon SW2-30x, pin 111 | Eject switch  |
Sink to ground to activate. |
| 6 | POW_LED | Syscon SW2-30x, pin 5 | Green led | Connects to bottom-left corner pin (green gnd) of dual red/green LED over power switch. |
| 7 | STBY_LED | Syscon SW2-30x, pin 6 | Red led | Connects to top-left corner pin (red gnd) of dual red/green LED over power switch. |
| 8 | BD_LED | BluRay Connector, pin 13 | Blue led | Connects to blue LED over eject switch. |
| 9 | GND | GND | GND | Ground |
| 10 | +5V_EVER | Power Supply Connector (CN101), pin 1 | VCC | 5V Standby |
- above top panel view port behind pcb. resistors was not tested.