Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
Line 54: Line 54:
| 25 || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
| 25 || {{cellcolors|#808080|#FF4500}} <s>P125/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors [[Thermal#Temperature_Monitors|TMP411A/B]] || 3v @ standby (3.15)
|-
|-
| 26 || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
| 26 || {{cellcolors|#aa7744}} <span style="text-decoration: overline;">RESET</span> || RESET || ←I || Connected to Pin 9 @ [[Service_Connectors#CN.3F.3F.3F.3F|Service Connector 3rd Gen.]] through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators|463A]], pin 3 ||  
|-
|-
| 27 || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) ||  
| 27 || {{cellcolors|#ff77bb}} <s>P124/</s>XT2 || XT_SUB || ←I || Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?) ||  
Line 72: Line 72:
| 34 || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
| 34 || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
|-
| 35 || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
| 35 || {{cellcolors|#ff3333|#ffffff}} V<span style="font-size:60%;">DD</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 36 || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
| 36 || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 37 || P60/SCL0 ||  || ←I/O→ ||  || 0.2v @ standby
| 37 || P60/SCL0 ||  || ←I/O→ ||  || 0.2v @ standby
Line 118: Line 118:
| 56 || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
| 56 || {{cellcolors|#333333|#ffffff}} EV<span style="font-size:60%;">SS1</span> || GND || - ||  || 0
|-
|-
| 57 || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
| 57 || {{cellcolors|#ff3333|#ffffff}} EV<span style="font-size:60%;">DD1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-  
|-  
| 58 || P80/EX0 ||  || ←I/O→ ||  || 0
| 58 || P80/EX0 ||  || ←I/O→ ||  || 0
Line 200: Line 200:
| 96 || P117 ||  || ←I/O→ ||  || 0
| 96 || P117 ||  || ←I/O→ ||  || 0
|-
|-
| 97 || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
| 97 || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF1</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 98 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
| 98 || {{cellcolors|#e0e0e0}} <s>P110/ANO0</s> || NOT_CONNECTED || - ||  || 0
Line 206: Line 206:
| 99 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
| 99 || {{cellcolors|#e0e0e0}} <s>P111/ANO1</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 100 || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators | 463A]], pin 2 || 3v @ standby (3.3)
| 100 || {{cellcolors|#ff3333|#ffffff}} AV<span style="font-size:60%;">REF0</span> || 3.3_EVER_B || - || Connected to standby voltage regulator [[Talk:Regulators|463A]], pin 2 || 3v @ standby (3.3)
|-
|-
| 101 || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
| 101 || {{cellcolors|#333333|#ffffff}} AV<span style="font-size:60%;">SS0</span> || GND || - ||  || 0
|-
|-
| 102 || P157/ANI15 ||  || ←I/O→ || || 0
| 102 || P157/ANI15 ||  || ←I/O→ || 100k resistor to GND || 0
|-
|-
! colspan="6" |  
! colspan="6" |  
|-
|-
| 103 || P156/ANI14 ||  || ←I/O→ || || 0
| 103 || P156/ANI14 ||  || ←I/O→ || 100k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_B) at the other side of the board || 0
|-
|-
| 104 || P155/ANI13 ||  || ←I/O→ || || 0
| 104 || P155/ANI13 ||  || ←I/O→ || 100k resistor to GND at the other side of the board || 0
|-
|-
| 105 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
| 105 || {{cellcolors|#e0e0e0}} <s>P154/ANI12</s> || NOT_CONNECTED || - ||  || 0
Line 226: Line 226:
| 108 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
| 108 || {{cellcolors|#e0e0e0}} <s>P151/ANI9</s> || NOT_CONNECTED || - ||  || 0
|-
|-
| 109 || P150/ANI8 ||  || ←I/O→ || || 3v @ standby
| 109 || P150/ANI8 ||  || ←I/O→ || 10k resistor to pin 8 of voltage regulator [[Talk:Regulators|463A]] (3.3_EVER_B). And continues in another track unknown || 3v @ standby
|-
|-
| 110 || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3
| 110 || {{cellcolors|#d699ff}} <s>P27/</s>ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards|Switch board]] || 3v @ standby (3.3) 3.3

Revision as of 17:08, 24 June 2021

Pin # Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 P142/SCK20/SCL20 ←I Connected to pin27 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 127 and 128 ?) 0
2 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ←I Connected to pinD1@SB CXD9963GB through the resistor ~1V @ standby (0 V?)
3 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION ←I Connected to pinBA17@BE through the NPN transistor (CELL switches the transistor to connect this pin to GND) 3V @ standby (3.15V)
4 P120/INTP0/EXLVI ←I/O→ To +12V_MAIN through the resistor and divider (EXLVI config = External potential input for low-voltage detector ?) 0
5 P37 POW_LED O→ Connected to dual led(Green) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36 STBY_LED O→ Connected to dual led(Red) on Switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 P35 ←I/O→ Connected to pinAA18@SB CXD9963GB 0
8 P34 ←I/O→ Connected to pinAA17@SB CXD9963GB 0
9 P33 ←I/O→ CELL BE related? 0
10 P32 ←I/O→ 0
11 P163/TI13/TO13 BACK_LEDS O→ Connected to Backlit LEDs on Switch board 0
12 P162/TI12/TO12 CONTOUR_LEDS O→ Connected to CONTOUR LEDs on Switch board 0
13 P161/TI11/TO11 NOT_CONNECTED - Disconnected to GND through a missing SMD component. See: NOWHERE 0
14 P160/TI10/TO10 NOT_CONNECTED - Disconnected to GND through a missing SMD component at the other side of the board. See: VIA 0
15 P47/INTP2 ←I/O→ Unknown purpose. The trace goes in the direction of the Wifi/BT module 0
16 P46/INTP1/TI05/TO05 BUZZER O→ Connected to the base of a transistor that drives a pin of the buzzer to GND 0
17 P45/SO01 ←I/O→ 0
18 P44/SI01 ←I/O→ 3v @ standby
19 P43/SCK01 ←I/O→ 0
20 P42/TI04/TO04 ←I/O→ 0
21 P41/TOOL1 TOOL_CLK ←I/O→ Tool clock. Connected to Pin 13 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
22 P40/TOOL0 TOOL_DAT ←I/O→ Tool Data. Connected to Pin 7 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 0
23 P127/SO21 ←I/O→ 0
24 P126/SI21/SDA21 THR_I2C_SDA ←I/O→ SMBus data. Connected to pin 7 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
25 P125/SCK21/SCL21 THR_I2C_SCL O→ SMBus clock. Connected to pin 8 of CELL/RSX temperature monitors TMP411A/B 3v @ standby (3.15)
26 RESET RESET ←I Connected to Pin 9 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27 P124/XT2 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123/XT1 XT_SUB ←I Subsystem clock. Connected to a big black crystal. CLK -> 1-2V Amplitude (32.768Khz?)
29 FLMD0 FLASH_MODE - Flash programming mode. Connected to pin 8 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.33
30 P122/X2/EXCLK XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 0.8v @ standby (1.1)
31 P121/X1 XT_MAIN ←I Main system clock. Connected to a tiny metallic crystal marked "EX" 2.2v @ standby (2.4)
32 REGC VREG_CAP - Voltage regulator capacitance. Connected to ground through a capacitor (around 1uF) at the other side of the board. See: VIA
33 VSS0 GND - 0
34 EVSS0 GND - 0
35 VDD 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
37 P60/SCL0 ←I/O→ 0.2v @ standby
38 P61/SDA0 ←I/O→ 0.2v @ standby
39 P62 ←I/O→ 0
40 P63 ←I/O→ 0
41 P31/TI03/TO03/INTP4 ACIN_DET ←I Connected to pin 4 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
42 P64/RD ←I/O→ Connected (indirectly) to voltage regulator BD9684 0906, pin 4 (enable something) 0
43 P65/WR0 ←I/O→ Connected to Pin 12 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode 3.0
44 P66/WR1 ←I/O→ 0
45 P67/ASTB NOT_CONNECTED - 0
46 P77/EX23/KR7/INTP11 ←I/O→ 0
47 P76/EX22/KR6/INTP10 ←I/O→ 3v @ standby (3.15)
48 P75/EX21/KR5/INTP9 ←I/O→ 3v @ standby (3.15)
49 P74/EX20/KR4/INTP8 ←I/O→ 0
50 P73/EX19/KR3 ←I/O→ Connected to pin 3 @ Service Connector 3rd Gen.. And to voltage regulator D35653 0S25 (FLASH_ENABLE ?) 0
51 P72/EX18/KR2 ←I/O→ 0
52 P71/EX17/KR1 ←I/O→ Connected to voltage regulator BD3525, pin 12 (enable something) 0
53 P70/EX16/KR0 ←I/O→ 0
54 P06/WAIT ←I/O→ 0
55 P05/CLKOUT ←I/O→ 0
56 EVSS1 GND - 0
57 EVDD1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
58 P80/EX0 ←I/O→ 0
59 P81/EX1 ←I/O→ 0
60 P82/EX2 ←I/O→ 0
61 P83/EX3 ←I/O→ 0
62 P84/EX4 ←I/O→ 0
63 P85/EX5 ←I/O→ 0
64 P86/EX6 ←I/O→ 0
65 P87/EX7 ←I/O→ 0
66 P30/INTP3/RTC1HZ ←I/O→ 0
67 P50/EX8 ←I/O→ 0
68 P51/EX9 ←I/O→ 0
69 P52/EX10 ←I/O→ 0
70 P53/EX11 ←I/O→ 0
71 P54/EX12 ←I/O→ 0
72 P55/EX13 ←I/O→ 0
73 P56/EX14 ←I/O→ 0
74 P57/EX15 ←I/O→ 0
75 P17/EX31/TI02/TO02 ←I/O→ Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16/EX30/TI01/TO01/INTP5 ←I/O→ 3v @ standby (3.15)
77 P15/EX29/RTCDIV/RTCCL ←I/O→ 3v @ standby (3.3)
78 P14/EX28/RxD3 SC_RxD ←I SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector 0
79 P13/EX27/TxD3 SC_TxD O→ SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector 3rd Gen. through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector 3.3
80 P12/EX26/SO00/TxD0 BE_SPI_DO O→ SO from Cell Slave to Syscon Master 0
81 P11/EX25/SI00/RxD0 BE_SPI_DI ←I SI from Syscon Master to Cell Slave 1.2
82 P10/EX24/SCK00 BE_SPI_CLK ? ←I/O→ Serial Clock 0
83 P90/EX32 BE_SPI_CS ? ←I/O→ Chip Select 2.0
84 P91/EX33 ←I/O→ 3v @ standby
85 P92/EX34 ←I/O→ 0
86 P93/EX35 ←I/O→ 0
87 P94 ←I/O→ RSX_SPI_CS ? See: Template:RSX pad layout 41x41 and pad AW8@ 0
88 P95/SCK11/SCL11 ←I/O→ RSX_SPI_CLK ? See: Template:RSX pad layout 41x41 and pad AY8@ 0
89 P96/SI11/SDA11 ←I/O→ RSX_SPI_DI ? See: Template:RSX pad layout 41x41 and pad BA7@ 0
90 P97/SO11 ←I/O→ RSX_SPI_DO ? See: Template:RSX pad layout 41x41 and pad BA6@ 0
91 P112 ←I/O→ 0
92 P113 ←I/O→ Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 P114 ←I/O→ 0
94 P115 ←I/O→ 0
95 P116 ←I/O→ Connected to voltage regulator BD3527 (near USB), pin 12 0
96 P117 ←I/O→ 0
97 AVREF1 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
98 P110/ANO0 NOT_CONNECTED - 0
99 P111/ANO1 NOT_CONNECTED - 0
100 AVREF0 3.3_EVER_B - Connected to standby voltage regulator 463A, pin 2 3v @ standby (3.3)
101 AVSS0 GND - 0
102 P157/ANI15 ←I/O→ 100k resistor to GND 0
103 P156/ANI14 ←I/O→ 100k resistor to pin 8 of voltage regulator 463A (3.3_EVER_B) at the other side of the board 0
104 P155/ANI13 ←I/O→ 100k resistor to GND at the other side of the board 0
105 P154/ANI12 NOT_CONNECTED - 0
106 P153/ANI11 NOT_CONNECTED - 0
107 P152/ANI10 NOT_CONNECTED - 0
108 P151/ANI9 NOT_CONNECTED - 0
109 P150/ANI8 ←I/O→ 10k resistor to pin 8 of voltage regulator 463A (3.3_EVER_B). And continues in another track unknown 3v @ standby
110 P27/ANI7 POW_SW_DET ←I Power switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
111 P26/ANI6 EJECT_SW_DET ←I Eject switch detect. Connected to Switch board 3v @ standby (3.3) 3.3
112 P25/ANI5 ←I/O→ 0
113 P24/ANI4 ←I/O→ 0
114 P23/ANI3 ←I/O→ 0
115 P22/ANI2 ←I/O→ 0
116 P21/ANI1 ←I/O→ 0
117 P20/ANI0 ←I/O→ (0V?)
118 P130 ACDC_STBY O→ Connected to pin 3 of the PSU control connector. See: CECH-25xx/SW2/SwitchBoard/PSU schematic 3v @ standby (3.3)
119 P131/TI06/TO06 ←I/O→ Connected to voltage regulator 348A, pins 2 and 7 (EN_HDMI & EN_AV together ?... in other words, enable video output) 3v @ standby (3.3)
120 P07 ←I/O→ SB_SPI_CS @ CXD9963GB ? 0
121 P04/SCK10/SCL10 ←I/O→ SB_SPI_CLK @ CXD9963GB ? 0
122 P03/SI10/RxD1/SDA10 ←I/O→ SB_SPI_DI @ CXD9963GB ? 0
123 P02/SO10/TxD1 ←I/O→ SB_SPI_DO @ CXD9963GB ? 0
124 P01/TO00 ←I/O→ Connected to pin93 @Panasonic MN8647091 0
125 P00/TI00 ←I/O→ 0
126 P145/TI07/TO07 FAN_PWM O→ PWM Control for the Fan. 0
127 P144/SO20/TxD2 ←I/O→ (HDMI controller CEC data channel related with pins 1 and 128 ?) 0
128 P143/SI20/RxD2/SDA20 ←I/O→ Connected to pin29 @Panasonic MN8647091 (HDMI controller CEC data channel related with pins 1 and 127 ?) 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=59819"