Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
mNo edit summary
m (Now we can strike the pin names of the unused configurations, and change the I/O arrows based on it, this way)
Line 12: Line 12:
| 4 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider || 0
| 4 || P120/INTP0/EXLVI ||  || ←I/O→ || To +12V_MAIN through the resistor and divider || 0
|-
|-
| 5 || P37 || POW_LED || ←I/O→ || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
| 5 || P37 || POW_LED || O→ || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
|-
|-
| 6 || P36 || STBY_LED || ←I/O→ || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
| 6 || P36 || STBY_LED || O→ || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
|-
|-
| 7 || P35 ||  || ←I/O→ || Connected to pinAA18@SB || 0
| 7 || P35 ||  || ←I/O→ || Connected to pinAA18@SB || 0
Line 24: Line 24:
| 10 || P32 ||  || ←I/O→ ||  || 0
| 10 || P32 ||  || ←I/O→ ||  || 0
|-
|-
| 11 || P163/TI13/TO13 || BACK_LEDS || ←I/O→ || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
| 11 || P163<s>/TI13/</s>TO13 || BACK_LEDS || O→ || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
|-
|-
| 12 || P162/TI12/TO12 || CONTOUR_LEDS || ←I/O→ || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
| 12 || P162<s>/TI12/</s>TO12 || CONTOUR_LEDS || O→ || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
|-
|-
| 13 || P161/TI11/TO11 ||  || ←I/O→ || Absent element between this line and GND. Nothing else.  || 0
| 13 || P161/TI11/TO11 ||  || ←I/O→ || Absent element between this line and GND. Nothing else.  || 0
Line 34: Line 34:
| 15 || P47/INTP2 ||  || ←I/O→ ||  || 0
| 15 || P47/INTP2 ||  || ←I/O→ ||  || 0
|-
|-
| 16 || P46/INTP1/TI05/TO05 || BUZZER || ←I/O→ ||  || 0
| 16 || P46<s>/INTP1/TI05/</s>TO05 || BUZZER || O→ ||  || 0
|-
|-
| 17 || P45/SO01 ||  || ←I/O→ ||  || 0
| 17 || P45/SO01 ||  || ←I/O→ ||  || 0
Line 50: Line 50:
| 23 || P127/SO21 ||  || ←I/O→ ||  || 0
| 23 || P127/SO21 ||  || ←I/O→ ||  || 0
|-
|-
| 24 || P126/SI21/SDA21 || THR_I2C_SDA || ←I/O→ || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
| 24 || P126<s>/SI21/</s>SDA21 || THR_I2C_SDA || ←I/O→ || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
|-
|-
| 25 || P125/SCK21/SCL21 || THR_I2C_SCL || ←I/O→ || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
| 25 || P125<s>/SCK21/</s>SCL21 || THR_I2C_SCL || O→ || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
|-
|-
| 26 || <span style="text-decoration: overline;">RESET</span> ||  || ←I || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
| 26 || <span style="text-decoration: overline;">RESET</span> ||  || ←I || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
Line 162: Line 162:
| 77 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
| 77 || P15/EX29/RTCDIV/RTCCL ||  || ←I/O→ ||  || 3v @ standby (3.3)
|-
|-
| 78 || P14/EX28/RxD3 || SC_RxD || ←I/O→ || SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
| 78 || P14<s>/EX28/</s>RxD3 || SC_RxD || ←I || SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
|-
|-
| 79 || P13/EX27/TxD3 || SC_TxD || ←I/O→ || SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
| 79 || P13<s>/EX27/</s>TxD3 || SC_TxD || O→ || SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
|-
|-
| 80 || P12/EX26/SO00/TxD0 || BE_SPI_DO || ←I/O→ || SO from Cell Slave to Syscon Master || 0
| 80 || P12<s>/EX26/SO00/</s>TxD0 || BE_SPI_DO || O→ || SO from Cell Slave to Syscon Master || 0
|-
|-
| 81 || P11/EX25/SI00/RxD0 || BE_SPI_DI || ←I/O→ || SI from Syscon Master to Cell Slave || 1.2
| 81 || P11<s>/EX25/SI00/</s>RxD0 || BE_SPI_DI || ←I || SI from Syscon Master to Cell Slave || 1.2
|-
|-
| 82 || P10/EX24/<span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
| 82 || P10/EX24/<span style="text-decoration: overline;">SCK00</span> || BE_SPI_CLK ? || ←I/O→ || Serial Clock || 0
Line 228: Line 228:
| 109 || P150/ANI8 ||  || ←I/O→ ||  || 3v @ standby
| 109 || P150/ANI8 ||  || ←I/O→ ||  || 3v @ standby
|-
|-
| 110 || P27/ANI7 || POW_SW_DET || ←I/O→ || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
| 110 || P27/ANI7 || POW_SW_DET || ←I || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 111 || P26/ANI6 || EJECT_SW_DET || ←I/O→ || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
| 111 || P26/ANI6 || EJECT_SW_DET || ←I || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 112 || P25/ANI5 ||  || ←I/O→ ||  || 0
| 112 || P25/ANI5 ||  || ←I/O→ ||  || 0
Line 260: Line 260:
| 125 || P00/TI00 ||  || ←I/O→ ||  || 0
| 125 || P00/TI00 ||  || ←I/O→ ||  || 0
|-
|-
| 126 || P145/TI07/TO07 || FAN_PWM || ←I/O→ || PWM Control for the Fan. || 0
| 126 || P145<s>/TI07/</s>TO07 || FAN_PWM || O→ || PWM Control for the Fan. || 0
|-
|-
| 127 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 0
| 127 || P144/SO20/TxD2 ||  || ←I/O→ ||  || 0

Revision as of 18:34, 23 June 2021

Pin # Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 P142/SCK20/SCL20 ←I Connected to pin27 @Panasonic MN8647091 0
2 P141/PCLBUZ1/INTP7 SB_INT/SYSCSINT ←I/O→ Connected to pinD1@SB through the resistor ~1V @ standby (0 V?)
3 P140/PCLBUZ0/INTP6 BE_INT/ATTENTION ←I/O→ Connected to pinBA17@BE through the NPN transistor 3V @ standby (3.15V)
4 P120/INTP0/EXLVI ←I/O→ To +12V_MAIN through the resistor and divider 0
5 P37 POW_LED O→ Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36 STBY_LED O→ Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 P35 ←I/O→ Connected to pinAA18@SB 0
8 P34 ←I/O→ Connected to pinAA17@SB 0
9 P33 ←I/O→ CELL BE related? 0
10 P32 ←I/O→ 0
11 P163/TI13/TO13 BACK_LEDS O→ Connected to Backlit LEDs on switch board 0
12 P162/TI12/TO12 CONTOUR_LEDS O→ Connected to CONTOUR LEDs on switch board 0
13 P161/TI11/TO11 ←I/O→ Absent element between this line and GND. Nothing else. 0
14 P160/TI10/TO10 ←I/O→ 0
15 P47/INTP2 ←I/O→ 0
16 P46/INTP1/TI05/TO05 BUZZER O→ 0
17 P45/SO01 ←I/O→ 0
18 P44/SI01 ←I/O→ 3v @ standby
19 P43/SCK01 ←I/O→ 0
20 P42/TI04/TO04 ←I/O→ 0
21 P41/TOOL1 Debugger Pin? ←I/O→ Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode 3.0
22 P40/TOOL0 Debugger Pin? ←I/O→ Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode 0
23 P127/SO21 ←I/O→ 0
24 P126/SI21/SDA21 THR_I2C_SDA ←I/O→ Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) 3v @ standby (3.15)
25 P125/SCK21/SCL21 THR_I2C_SCL O→ Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) 3v @ standby (3.15)
26 RESET ←I Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27 P124/XT2 XT2 ←I Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123/XT1 XT1 ←I Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29 FLMD0 - Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode 3.33
30 P122/X2/EXCLK ←I Connected to a small external oscilator 2 ? 0.8v @ standby (1.1)
31 P121/X1 ←I Connected to a small external oscilator 2 ? 2.2v @ standby (2.4)
32 REGC ←I/O→
33 VSS0 GND - 0
34 EVSS0 GND - 0
35 VDD 3.3_EVER_B - Connected to voltage regulator 463A, pin 2 3v @ standby (3.3)
36 EVDD0 3.3_EVER_B - Connected to voltage regulator 463A, pin 2 3v @ standby (3.3)
37 P60/SCL0 ←I/O→ 0.2v @ standby 0
38 P61/SDA0 ←I/O→ 0.2v @ standby 0
39 P62 ←I/O→ 0
40 P63 ←I/O→ 0
41 P31/TI03/TO03/INTP4 AC IN? ←I/O→ 3v @ standby (3.3)
42 P64/RD ←I/O→ Connected (indirectly) to voltage regulator BD9684 0906, pin 4 0
43 P65/WR0 ←I/O→ Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode 3.0
44 P66/WR1 ←I/O→ 0
45 P67/ASTB ←I/O→ 0
46 P77/EX23/KR7/INTP11 ←I/O→ 0
47 P76/EX22/KR6/INTP10 ←I/O→ 3v @ standby (3.15)
48 P75/EX21/KR5/INTP9 ←I/O→ 3v @ standby (3.15)
49 P74/EX20/KR4/INTP8 ←I/O→ 0
50 P73/EX19/KR3 ←I/O→ Connected to pin 3 @ Service Connector. And to voltage regulator D35653 0S25 0
51 P72/EX18/KR2 ←I/O→ 0
52 P71/EX17/KR1 ←I/O→ Connected to voltage regulator BD3525, pin 12 0
53 P70/EX16/KR0 ←I/O→ 0
54 P06/WAIT ←I/O→ 0
55 P05/CLKOUT ←I/O→ 0
56 EVSS1 GND - 0
57 EVDD1 3.3_EVER_B - Connected to voltage regulator 463A, pin 2 3v @ standby (3.3)
58 P80/EX0 ←I/O→ 0
59 P81/EX1 ←I/O→ 0
60 P82/EX2 ←I/O→ 0
61 P83/EX3 ←I/O→ 0
62 P84/EX4 ←I/O→ 0
63 P85/EX5 ←I/O→ 0
64 P86/EX6 ←I/O→ 0
65 P87/EX7 ←I/O→ 0
66 P30/INTP3/RTC1HZ ←I/O→ 0
67 P50/EX8 ←I/O→ 0
68 P51/EX9 ←I/O→ 0
69 P52/EX10 ←I/O→ 0
70 P53/EX11 ←I/O→ 0
71 P54/EX12 ←I/O→ 0
72 P55/EX13 ←I/O→ 0
73 P56/EX14 ←I/O→ 0
74 P57/EX15 ←I/O→ 0
75 P17/EX31/TI02/TO02 ←I/O→ Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16/EX30/TI01/TO01/INTP5 ←I/O→ 3v @ standby (3.15)
77 P15/EX29/RTCDIV/RTCCL ←I/O→ 3v @ standby (3.3)
78 P14/EX28/RxD3 SC_RxD ←I SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector 0
79 P13/EX27/TxD3 SC_TxD O→ SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector 3.3
80 P12/EX26/SO00/TxD0 BE_SPI_DO O→ SO from Cell Slave to Syscon Master 0
81 P11/EX25/SI00/RxD0 BE_SPI_DI ←I SI from Syscon Master to Cell Slave 1.2
82 P10/EX24/SCK00 BE_SPI_CLK ? ←I/O→ Serial Clock 0
83 P90/EX32 BE_SPI_CS ? ←I/O→ Chip Select 2.0
84 P91/EX33 ←I/O→ 3v @ standby
85 P92/EX34 ←I/O→ 0
86 P93/EX35 ←I/O→ 0
87 P94 ←I/O→ 0
88 P95/SCK11/SCL11 ←I/O→ 0
89 P96/SI11/SDA11 ←I/O→ 0
90 P97/SO11 ←I/O→ 0
91 P112 ←I/O→ 0
92 P113 ←I/O→ Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 P114 ←I/O→ 0
94 P115 ←I/O→ 0
95 P116 ←I/O→ Connected to voltage regulator BD3527 (near USB), pin 12 0
96 P117 ←I/O→ 0
97 AVREF1 3.3_EVER_B - Connected to voltage regulator 463A, pin 2 3v @ standby (3.3)
98 P110/ANO0 ←I/O→ 0
99 P111/ANO1 ←I/O→ 0
100 AVREF0 3.3_EVER_B - Connected to voltage regulator 463A, pin 2 3v @ standby (3.3)
101 AVSS0 GND - 0
102 P157/ANI15 ←I/O→ 0
103 P156/ANI14 ←I/O→ 0
104 P155/ANI13 ←I/O→ 0
105 P154/ANI12 ←I/O→ 0
106 P153/ANI11 ←I/O→ 0
107 P152/ANI10 ←I/O→ 0
108 P151/ANI9 ←I/O→ 0
109 P150/ANI8 ←I/O→ 3v @ standby
110 P27/ANI7 POW_SW_DET ←I Power switch detect. Connected to switch board 3v @ standby (3.3) 3.3
111 P26/ANI6 EJECT_SW_DET ←I Eject switch detect. Connected to switch board 3v @ standby (3.3) 3.3
112 P25/ANI5 ←I/O→ 0
113 P24/ANI4 ←I/O→ 0
114 P23/ANI3 ←I/O→ 0
115 P22/ANI2 ←I/O→ 0
116 P21/ANI1 ←I/O→ 0
117 P20/ANI0 ←I/O→ (0V?)
118 P130 ACDC_STBY O→ Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ? 3v @ standby (3.3)
119 P131/TI06/TO06 ←I/O→ 3v @ standby (3.3)
120 P07 ←I/O→ 0
121 P04/SCK10/SCL10 ←I/O→ 0
122 P03/SI10/RxD1/SDA10 ←I/O→ 0
123 P02/SO10/TxD1 ←I/O→ 0
124 P01/TO00 ←I/O→ Connected to pin93 @Panasonic MN8647091 0
125 P00/TI00 ←I/O→ 0
126 P145/TI07/TO07 FAN_PWM O→ PWM Control for the Fan. 0
127 P144/SO20/TxD2 ←I/O→ 0
128 P143/SI20/RxD2/SDA20 ←I/O→ Connected to pin29 @Panasonic MN8647091 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=59782"