Template:Syscon pinout LQFP 128 pins: Difference between revisions

From PS3 Developer wiki
Jump to navigation Jump to search
(Moved from SW2-303)
 
mNo edit summary
Line 1: Line 1:
{|class="wikitable"
{|class="wikitable"
! Pin # !! Name !! Port !! Description !! STBY Voltages
! rowspan="2" | Pin # !! colspan="2" | Name !! rowspan="2" | Type !! rowspan="2" | Description !! rowspan="2" | STBY Voltages
|-
|-
| 1 || P142/SCK20/SCL20  || || Connected to pin27 @Panasonic [[MN8647091]] || 0
! <abbr title="NEC/Renesas pin configuration">NEC/Renesas</abbr> !! Sony/Custom
|-
|-
| 2 || SB_INT || || SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
| 1 || P142/SCK20/SCL20  || || || Connected to pin27 @Panasonic [[MN8647091]] || 0
|-
|-
| 3 || BE_INT || || BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15
| 2 || SB_INT || || || SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) || 0
|-
|-
| 4 || || || To +12V_MAIN through the resistor and divider || 0
| 3 || BE_INT || || || BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) || 3.15
|-
|-
| 5 || P37/POW_LED || || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
| 4 || || || || To +12V_MAIN through the resistor and divider || 0
|-
|-
| 6 || P36/STBY_LED || || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
| 5 || P37/POW_LED || ||  || Connected to dual led(Green) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 0
|-
|-
| 7 || || || Connected to pinAA18@SB || 0
| 6 || P36/STBY_LED || ||  || Connected to dual led(Red) on [[switch boards | switch board]] through the dual digital NPN trans. EMH1(SOT-563) || 3v @ standby (3.3V)
|-
|-
| 8 || || || Connected to pinAA17@SB || 0
| 7 || ||  || || Connected to pinAA18@SB || 0
|-
|-
| 9 || || || CELL BE related? || 0
| 8 || || || || Connected to pinAA17@SB || 0
|-
|-
| 10 || || || || 0
| 9 || || || || CELL BE related? || 0
|-
|-
| 11 || P106 || || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
| 10 || ||  || || || 0
|-
|-
| 12 || P105 || || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
| 11 || P106 || ||  || Connected to Backlit LEDs on [[switch boards | switch board]] || 0
|-
|-
| 13 || P104 || || Absent element between this line and GND. Nothing else.  || 0
| 12 || P105 || || || Connected to CONTOUR LEDs on [[switch boards | switch board]] || 0
|-
|-
| 14 || || || || 0
| 13 || P104 || || || Absent element between this line and GND. Nothing else.  || 0
|-
|-
| 15 || INTP?? || || || 0
| 14 || ||  || || || 0
|-
|-
| 16 || BUZZER || || || 0
| 15 || INTP?? || ||  || || 0
|-
|-
| 17 || P45/SO01  || || || 0
| 16 || BUZZER || || || || 0
|-
|-
| 18 || P44/SI01  || || 3v @ standby || 3.0
| 17 || P45/SO01  || || || || 0
|-
|-
| 19 || P43/SCK01  || || || 0
| 18 || P44/SI01  || || || 3v @ standby || 3.0
|-
|-
| 20 || || || || 0
| 19 || P43/SCK01  || ||  || || 0
|-
|-
| 21 || TOOL1 || || Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode || 3.0
| 20 || ||  || || || 0
|-
|-
| 22 || TOOL0/Debugger Pin? || || Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode || 0
| 21 || TOOL1 || || || Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode || 3.0
|-
|-
| 23 || P127/SO21  || || || 0
| 22 || TOOL0/Debugger Pin? || || || Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode || 0
|-
|-
| 24 || P126/THR_I2C_SDA || || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
| 23 || P127/SO21  || || || || 0
|-
|-
| 25 || P125/THR_I2C_SCL || || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
| 24 || P126/THR_I2C_SDA || ||  || Connected to pin 7 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared data line) || 3v @ standby (3.15)
|-
|-
| 26 || RESET? || || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
| 25 || P125/THR_I2C_SCL || || || Connected to pin 8 of CELL/RSX [[Thermal | temperature monitor IC's]] (SMbus I2C shared clock line) || 3v @ standby (3.15)
|-
|-
| 27 || P124 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) ||  
| 26 || RESET? || || || Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator [[Talk:Regulators | 463A]], pin 3 ||  
|-
|-
| 28 || P123 || || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) ||  
| 27 || P124 || ||  || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?) ||  
|-
|-
| 29 || P137/FLMD0 || || Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode || 3.33
| 28 || P123 || ||  || Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)  ||  
|-
|-
| 30 || P122 || || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1)
| 29 || P137/FLMD0 || ||  || Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode || 3.33
|-
|-
| 31 || P121 || || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4)
| 30 || P122 || ||  || Connected to a small external oscilator 2 ? || 0.8v @ standby (1.1)
|-
|-
| 32 || REGC || || ||  
| 31 || P121 || || || Connected to a small external oscilator 2 ? || 2.2v @ standby (2.4)
|-
|-
| 33 || GROUND/Vss0 || || || 0
| 32 || REGC || ||  || ||  
|-
|-
| 34 || GROUND/EVss0 || || || 0
| 33 || GROUND/Vss0 || ||  || || 0
|-
|-
| 35 || Vdd || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
| 34 || GROUND/EVss0 || || || || 0
|-
|-
| 36 || EVdd0 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
| 35 || Vdd || ||  || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
|-
|-
| 37 || P60 || || 0.2v @ standby || 0
| 36 || EVdd0 || || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
|-
|-
| 38 || P61 || || 0.2v @ standby || 0
| 37 || P60 || ||  || 0.2v @ standby || 0
|-
|-
| 39 || || ||  || 0
| 38 || P61 || ||  || 0.2v @ standby || 0
|-
|-
| 40 || || || || 0
| 39 || || || ||  || 0
|-
|-
| 41 || P31/AC IN? || || 3v @ standby (3.3) || 3.3
| 40 || || || || || 0
|-
|-
| 42 || || || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]],  pin 4 || 0
| 41 || P31/AC IN? || || || 3v @ standby (3.3) || 3.3
|-
|-
| 43 || P65 || || Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode || 3.0
| 42 || ||  || || Connected (indirectly) to voltage regulator [[Talk:Regulators | BD9684 0906]], pin 4 || 0
|-
|-
| 44 || || || || 0
| 43 || P65 || || || Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode  || 3.0
|-
|-
| 45 || || || || 0
| 44 || ||  || || || 0
|-
|-
| 46 || INTP?? || || || 0
| 45 || ||  || || || 0
|-
|-
| 47 || P76 || || 3v @ standby (3.15) || 3.15
| 46 || INTP?? || || || || 0
|-
|-
| 48 || P75 || || 3v @ standby (3.15) || 3.15
| 47 || P76 || ||  || 3v @ standby (3.15) || 3.15
|-
|-
| 49 || INTP?? || || || 0
| 48 || P75 || || || 3v @ standby (3.15) || 3.15
|-
|-
| 50 || P73 || || Connected to pin 3 @ Service Connector. And to voltage regulator [[Talk:Regulators | D35653 0S25]] || 0
| 49 || INTP?? || || || || 0
|-
|-
| 51 || || || || 0
| 50 || P73 || || || Connected to pin 3 @ Service Connector. And to voltage regulator [[Talk:Regulators | D35653 0S25]] || 0
|-
|-
| 52 || || || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 || 0
| 51 || ||  || || || 0
|-
|-
| 53 || || || || 0
| 52 || || || || Connected to voltage regulator [[Talk:Regulators | BD3525]],  pin 12 || 0
|-
|-
| 54 || || || || 0
| 53 || ||  || || || 0
|-
|-
| 55 || || || || 0
| 54 || ||  || || || 0
|-
|-
| 56 || GROUND/EVss1 || || || 0
| 55 || ||  || || || 0
|-
|-
| 57 || EVdd1 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
| 56 || GROUND/EVss1 || ||  || || 0
|-
| 57 || EVdd1 || ||  || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
|-  
|-  
| 58 || || || || 0
| 58 || ||  || || || 0
|-
|-
| 59 || || || || 0
| 59 || ||  || || || 0
|-
|-
| 60 || || || || 0
| 60 || ||  || || || 0
|-
|-
| 61 || || || || 0
| 61 || ||  || || || 0
|-
|-
| 62 || || || || 0
| 62 || ||  || || || 0
|-
|-
| 63 || || || || 0
| 63 || ||  || || || 0
|-
|-
| 64 || || || || 0
| 64 || ||  || || || 0
|-
|-
| 65 || || || || 0
| 65 || ||  || || || 0
|-
|-
| 66 || INTP?? || || || 0
| 66 || INTP?? || ||  || || 0
|-
|-
| 67 || || || || 0
| 67 || ||  || || || 0
|-
|-
| 68 || || || || 0
| 68 || ||  || || || 0
|-
|-
| 69 || || || || 0
| 69 || ||  || || || 0
|-
|-
| 70 || || || || 0
| 70 || ||  || || || 0
|-
|-
| 71 || || || || 0
| 71 || ||  || || || 0
|-
|-
| 72 || || || || 0
| 72 || ||  || || || 0
|-
|-
| 73 || || || || 0
| 73 || ||  || || || 0
|-
|-
| 74 || || || || 0
| 74 || ||  || || || 0
|-
|-
| 75 || || || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
| 75 || ||  || || Connected to voltage regulator [[Talk:Regulators | Mitsumi 040 810X]],  pin 5 || 0
|-
|-
| 76 || P16 || || 3v @ standby (3.15) || 3.15
| 76 || P16 || ||  || 3v @ standby (3.15) || 3.15
|-
|-
| 77 || P15 || || 3v @ standby (3.3) || 3.3
| 77 || P15 || ||  || 3v @ standby (3.3) || 3.3
|-
|-
| 78 || SC_RxD(RxD3/RxD2/P14) || || SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
| 78 || SC_RxD(RxD3/RxD2/P14) || ||  || SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ [[PCI]] Connector || 0
|-
|-
| 79 || SC_TxD(TxD3/TxD2/P13) || || SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
| 79 || SC_TxD(TxD3/TxD2/P13) || ||  || SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ [[PCI]] Connector || 3.3
|-
|-
| 80 || P12/EX26/SO00/TxD0 || || SO from Cell Slave to Syscon Master || 0
| 80 || P12/EX26/SO00/TxD0 || ||  || SO from Cell Slave to Syscon Master || 0
|-
|-
| 81 || P11 P11/EX25/SI00/RxD0  || || SI from Syscon Master to Cell Slave || 1.2
| 81 || P11 P11/EX25/SI00/RxD0  || ||  || SI from Syscon Master to Cell Slave || 1.2
|-
|-
| 82 || P10/EX24/SCK00 || || Serial Clock || 0
| 82 || P10/EX24/SCK00 || ||  || Serial Clock || 0
|-
|-
| 83 || P90 || || Chip Select || 2.0
| 83 || P90 || ||  || Chip Select || 2.0
|-
|-
| 84 || P91 || || 3v @ standby || 3.0
| 84 || P91 || ||  || 3v @ standby || 3.0
|-
|-
| 85 || || || || 0
| 85 || ||  || || || 0
|-
|-
| 86 || || || || 0
| 86 || ||  || || || 0
|-
|-
| 87 || || || || 0
| 87 || ||  || || || 0
|-
|-
| 88 ||  P95/SCK11/SCL11 || || || 0
| 88 ||  P95/SCK11/SCL11 || ||  || || 0
|-
|-
| 89 || /SI11/SDA11 || || || 0
| 89 || /SI11/SDA11 || ||  || || 0
|-
|-
| 90 ||  P97/SO11 || || || 0
| 90 ||  P97/SO11 || ||  || || 0
|-
|-
| 91 || || || || 0
| 91 || ||  || || || 0
|-
|-
| 92 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
| 92 || ||  || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near FLASH)]],  pin 12 || 0
|-
|-
| 93 || || || || 0
| 93 || ||  || || || 0
|-
|-
| 94 || || || || 0
| 94 || ||  || || || 0
|-
|-
| 95 || || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
| 95 || ||  || || Connected to voltage regulator [[Talk:Regulators | BD3527 (near USB)]],  pin 12 || 0
|-
|-
| 96 || || || || 0
| 96 || ||  || || || 0
|-
|-
| 97 || P101 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
| 97 || P101 || ||  || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
|-
|-
| 98 || || || || 0
| 98 || ||  || || || 0
|-
|-
| 99 || || || || 0
| 99 || ||  || || || 0
|-
|-
| 100 || P146 || || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
| 100 || P146 || ||  || Connected to voltage regulator [[Talk:Regulators | 463A]], pin 2 (3.3_EVER_B) || 3v @ standby (3.3)
|-
|-
| 101 || GROUND || || || 0
| 101 || GROUND || ||  || || 0
|-
|-
| 102 || || || || 0
| 102 || ||  || || || 0
|-
|-
| 103 || || || || 0
| 103 || ||  || || || 0
|-
|-
| 104 || || || || 0
| 104 || ||  || || || 0
|-
|-
| 105 || || || || 0
| 105 || ||  || || || 0
|-
|-
| 106 || || || || 0
| 106 || ||  || || || 0
|-
|-
| 107 || || || || 0
| 107 || ||  || || || 0
|-
|-
| 108 || || || || 0
| 108 || ||  || || || 0
|-
|-
| 109 || P150 || || 3v @ standby  || 3.0
| 109 || P150 || ||  || 3v @ standby  || 3.0
|-
|-
| 110 || P27/POW_SW_DET || || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
| 110 || P27/POW_SW_DET || ||  || Power switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 111 || P26/EJECT_SW_DET || || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
| 111 || P26/EJECT_SW_DET || ||  || Eject switch detect. Connected to [[switch boards | switch board]] || 3v @ standby (3.3) 3.3
|-
|-
| 112 || || || || 0
| 112 || ||  || || || 0
|-
|-
| 113 || || || || 0
| 113 || ||  || || || 0
|-
|-
| 114 || || || || 0
| 114 || ||  || || || 0
|-
|-
| 115 || || || || 0
| 115 || ||  || || || 0
|-
|-
| 116 || || || || 0
| 116 || ||  || || || 0
|-
|-
| 117 || P20 || || (0V?) || 0
| 117 || P20 || ||  || (0V?) || 0
|-
|-
| 118 || P130/ACDC_STBY || || Connected to standby voltage regulator [[Talk:Regulators | 348A]], pins 2 and 7 EN_HDMI ? || 3v @ standby (3.3)
| 118 || P130/ACDC_STBY || ||  || Connected to standby voltage regulator [[Talk:Regulators | 348A]], pins 2 and 7 EN_HDMI ? || 3v @ standby (3.3)
|-
|-
| 119 || P102 || || || 3v @ standby (3.3)
| 119 || P102 || ||  || || 3v @ standby (3.3)
|-
|-
| 120 || || || || 0
| 120 || ||  || || || 0
|-
|-
| 121 || P04/SCK10/SCL10 || || || 0
| 121 || P04/SCK10/SCL10 || ||  || || 0
|-
|-
| 122 || SI10/RxD1/SDA10 || || || 0
| 122 || SI10/RxD1/SDA10 || ||  || || 0
|-
|-
| 123 || P02/SO10/TxD1  || || || 0
| 123 || P02/SO10/TxD1  || ||  || || 0
|-
|-
| 124 || || || Connected to pin93 @Panasonic [[MN8647091]] || 0
| 124 || ||  || || Connected to pin93 @Panasonic [[MN8647091]] || 0
|-
|-
| 125 || || || || 0
| 125 || ||  || || || 0
|-
|-
| 126 || P145/FAN_PWM || || PWM Control for the Fan. || 0
| 126 || P145/FAN_PWM || ||  || PWM Control for the Fan. || 0
|-
|-
| 127 ||  P144/SO20/TxD2  || || || 0
| 127 ||  P144/SO20/TxD2  || ||  || || 0
|-
|-
| 128 || /SI20/RxD2/SDA20  || || Connected to pin29 @Panasonic [[MN8647091]] || 0
| 128 || /SI20/RxD2/SDA20  || ||  || Connected to pin29 @Panasonic [[MN8647091]] || 0
|}
|}<noinclude>[[Category:Templates]]</noinclude>

Revision as of 15:37, 23 June 2021

Pin # Name Type Description STBY Voltages
NEC/Renesas Sony/Custom
1 P142/SCK20/SCL20 Connected to pin27 @Panasonic MN8647091 0
2 SB_INT SB_INT/SYSCSINT, Connected to pinD1@SB through the resistor. ~1V @ standby (0 V?) 0
3 BE_INT BE_INT/ATTENTION, pinBA17@BE connected through the NPN transistor. 3V @ standby (3.15V) 3.15
4 To +12V_MAIN through the resistor and divider 0
5 P37/POW_LED Connected to dual led(Green) on switch board through the dual digital NPN trans. EMH1(SOT-563) 0
6 P36/STBY_LED Connected to dual led(Red) on switch board through the dual digital NPN trans. EMH1(SOT-563) 3v @ standby (3.3V)
7 Connected to pinAA18@SB 0
8 Connected to pinAA17@SB 0
9 CELL BE related? 0
10 0
11 P106 Connected to Backlit LEDs on switch board 0
12 P105 Connected to CONTOUR LEDs on switch board 0
13 P104 Absent element between this line and GND. Nothing else. 0
14 0
15 INTP?? 0
16 BUZZER 0
17 P45/SO01 0
18 P44/SI01 3v @ standby 3.0
19 P43/SCK01 0
20 0
21 TOOL1 Connected to Pin 13 @ Service Connector through a missing SMD component resistor/diode 3.0
22 TOOL0/Debugger Pin? Connected to Pin 7 @ Service Connector through a missing SMD component resistor/diode 0
23 P127/SO21 0
24 P126/THR_I2C_SDA Connected to pin 7 of CELL/RSX temperature monitor IC's (SMbus I2C shared data line) 3v @ standby (3.15)
25 P125/THR_I2C_SCL Connected to pin 8 of CELL/RSX temperature monitor IC's (SMbus I2C shared clock line) 3v @ standby (3.15)
26 RESET? Connected to Pin 9 @ Service Connector through a missing SMD component resistor/diode. And to standby voltage regulator 463A, pin 3
27 P124 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
28 P123 Connected to the big black external oscilator 1 next to syscon. CLK -> 1-2V Amplitude (32.768Khz?)
29 P137/FLMD0 Connected to pin 8 @ Service Connector through a missing SMD component resistor/diode 3.33
30 P122 Connected to a small external oscilator 2 ? 0.8v @ standby (1.1)
31 P121 Connected to a small external oscilator 2 ? 2.2v @ standby (2.4)
32 REGC
33 GROUND/Vss0 0
34 GROUND/EVss0 0
35 Vdd Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
36 EVdd0 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
37 P60 0.2v @ standby 0
38 P61 0.2v @ standby 0
39 0
40 0
41 P31/AC IN? 3v @ standby (3.3) 3.3
42 Connected (indirectly) to voltage regulator BD9684 0906, pin 4 0
43 P65 Connected to Pin 12 @ Service Connector through a missing SMD component resistor/diode 3.0
44 0
45 0
46 INTP?? 0
47 P76 3v @ standby (3.15) 3.15
48 P75 3v @ standby (3.15) 3.15
49 INTP?? 0
50 P73 Connected to pin 3 @ Service Connector. And to voltage regulator D35653 0S25 0
51 0
52 Connected to voltage regulator BD3525, pin 12 0
53 0
54 0
55 0
56 GROUND/EVss1 0
57 EVdd1 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
58 0
59 0
60 0
61 0
62 0
63 0
64 0
65 0
66 INTP?? 0
67 0
68 0
69 0
70 0
71 0
72 0
73 0
74 0
75 Connected to voltage regulator Mitsumi 040 810X, pin 5 0
76 P16 3v @ standby (3.15) 3.15
77 P15 3v @ standby (3.3) 3.3
78 SC_RxD(RxD3/RxD2/P14) SC_RxD UART (terminal).Connected to Pin 11 @ Service Connector through a missing SMD component resistor/diode, and to pin 6 @ PCI Connector 0
79 SC_TxD(TxD3/TxD2/P13) SC_TxD UART (terminal).Connected to Pin 10 @ Service Connector through a missing SMD component resistor/diode, and to pin 4 @ PCI Connector 3.3
80 P12/EX26/SO00/TxD0 SO from Cell Slave to Syscon Master 0
81 P11 P11/EX25/SI00/RxD0 SI from Syscon Master to Cell Slave 1.2
82 P10/EX24/SCK00 Serial Clock 0
83 P90 Chip Select 2.0
84 P91 3v @ standby 3.0
85 0
86 0
87 0
88 P95/SCK11/SCL11 0
89 /SI11/SDA11 0
90 P97/SO11 0
91 0
92 Connected to voltage regulator BD3527 (near FLASH), pin 12 0
93 0
94 0
95 Connected to voltage regulator BD3527 (near USB), pin 12 0
96 0
97 P101 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
98 0
99 0
100 P146 Connected to voltage regulator 463A, pin 2 (3.3_EVER_B) 3v @ standby (3.3)
101 GROUND 0
102 0
103 0
104 0
105 0
106 0
107 0
108 0
109 P150 3v @ standby 3.0
110 P27/POW_SW_DET Power switch detect. Connected to switch board 3v @ standby (3.3) 3.3
111 P26/EJECT_SW_DET Eject switch detect. Connected to switch board 3v @ standby (3.3) 3.3
112 0
113 0
114 0
115 0
116 0
117 P20 (0V?) 0
118 P130/ACDC_STBY Connected to standby voltage regulator 348A, pins 2 and 7 EN_HDMI ? 3v @ standby (3.3)
119 P102 3v @ standby (3.3)
120 0
121 P04/SCK10/SCL10 0
122 SI10/RxD1/SDA10 0
123 P02/SO10/TxD1 0
124 Connected to pin93 @Panasonic MN8647091 0
125 0
126 P145/FAN_PWM PWM Control for the Fan. 0
127 P144/SO20/TxD2 0
128 /SI20/RxD2/SDA20 Connected to pin29 @Panasonic MN8647091 0
Retrieved from "http://www.psdevwiki.com/ps3/index.php?title=Template:Syscon_pinout_LQFP_128_pins&oldid=59774"