Talk:Service Connectors: Difference between revisions

Revision as of 20:05, 20 September 2018

This pad is used for the same purpose as on the PS3 System; a ZIF connector is preset on prototype versions.

- it looks as if ribbon connectors could easily be soldered onto those pads, seeing as the ground pads are conducive of such.

- - yep, that's precisely what they're for (take a look at https://twitter.com/MinaRalwasser/status/1035581527076294656/photo/1 for the ps3 service connector example)

- - - But what can ultimately be achieved? Aren't there also some points where a USB TTL device could be soldered to?

- - - - You can end up dumping the syscon flash (on ps4 and possibly vita and and ps3 as well) by glitching it

Revision as of 02:22, 20 September 2018 (edit) BwE (talk \| contribs) No edit summary ← Older edit		Revision as of 20:05, 20 September 2018 (edit) (undo) Zecoxao (talk \| contribs) mNo edit summary Newer edit →
Line 7:		Line 7:

	**** But what can ultimately be achieved? Aren't there also some points where a USB TTL device could be soldered to?		**** But what can ultimately be achieved? Aren't there also some points where a USB TTL device could be soldered to?

			***** You can end up dumping the syscon flash (on ps4 and possibly vita and and ps3 as well) by glitching it