Sony Refurbishment
Jump to navigation
Jump to search
Description
This page is intended to document the actions taken by Sony when they perform official repairs to PS3 consoles.
General
- OEM stickers are replaced; for regions that have dates/datecodes on them, they are updated accordingly
- For slim (and potentially super slim) models, an official "PlayStation refurbished" sticker is also applied
SKU Models
Fat/Phat
COK-00x
- PSU replaced with APS-226/APS-227 (if it doesn't have one already)
- BD-400 replaced with BD-410
- Felt added to Blu-ray entrance interior
- Grey felt strip added underneath BD-410, smaller grey fabric removed
- CELL BE brace added
- RSX replaced with a newer revision
- If the RSX is 65nm or 40nm, a sticker is added under the USB ports (40 for 40nm, F for 65nm) to indicate. Also the Syscon chip is replaced (with different programming) so that the PS3 can accept the smaller RSX. This has the side effect of resetting the CELL BE run time counter to zero
Felt added to Blu-ray entrance
Felt strip added beneath Blu-ray drive
Brace added underneath CELL BE
"40" sticker indicating a 40nm RSX
_40nm_RSX.jpg)
Slim
| This article is a stub. You can help PS3 Developer wiki by expanding it. |
Super slim
| This article is a stub. You can help PS3 Developer wiki by expanding it. |
Non-Retail
see DECR Series
Gallery
CECHA00 Sony servicing report
COK-001 (CECHA00) board that had a Sony Refurbishment. Servicing dated 2010-04. The RSX has been replaced with a newer 90nm one with a 09 datecode.
COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.
COK-001 (CECHB00) board that had a Sony Refurbishment. Servicing dated 2011-07. The RSX has been replaced with a 40nm one.
_bottom_2010-04.jpg)
_40nm_bottom_2011-07.jpg)
_40nm_top_2011-07.jpg)
| ||||||||||||||||||||||
