Syscon Firmware is the firmware stored on the System Controller EEPROM (see Syscon Hardware). Updates are stored in update packages within the Update_files.tar of a Playstation Update Package (PUP). Syscon Packages appear to always be 5KB (5376 bytes) in size.

Syscon update packages

d/l: syscon_fw1.00-4.00.rar (51.74 KB)

Package structure

Sys_con_firmware Packages can be unpacked with unpkg

Overview

Address	Length	Value	Description
0x00	0x4	ASCI:"SCE"	SCE magic header
0x04	0x4	0x2	Flags
0x08	0x4	0x3	Type (0x3 = PKG)
0x0C	0x4	0x0	Blank/Unknown
0x10	0x4	0x0	Blank/Unknown
0x10	0x8	0x280	Start Data Offset ('hdr_len')
0x18	0x8	0x1080	Data Size ('dec_size')
0x20	0x260	-	Header
0x280	0x40	-	'info0' section (see below)
0x2C0	0x40	-	'info1' section (see below)
0x300	0x1000	-	'content'

'info0'

Address	Length	Value	Description
0x00	0x4	0x3
0x04	0x4	0x8
0x08	0x8	-	SC firmware revision (the high word of it is the SC type)
0x0C	0x4	0x0B8E(1.30-4.84) 0x0C16(1.81-4.84) 0x0D52(3.40-4.84) 0x0DBF(3.40-4.84) 0x0E69(3.40-4.84) 0x0F29(3.40-4.84) 0x0F38(3.41-4.84) 0x065D 0x0832(3.00-4.84) 0x08A0 0x08C2 0x0918	'SoftID'
0x10	0x8	0x0001000000000004 0x0001000000000005 0x0001000000000006 0x0001000100030002 0x0001000100030003 0x0001000200030002 0x0001000300030002 0x0001000400040002 0x0001000500000002 0x0001000500010001 0x00010002083E0832	'PatchID'
0x18	0x8	0x1000	'Content' Data Size
0x20	0x8	0x1000	'Content' Compressed Data Size
0x28	0x8	0x0
0x30	0x10	0x0

Note: PS3 firmwares cannot deal with compressed syscon firmwares, so they will abort the update process in that case.

Note2: The PatchID is also present in the first 8 bytes of decrypted content but 16bit swapped for ARM BGAs

'info1'

Address	Length	Value	Description
0x00	0x4	0x0
0x04	0x4	0x3
0x08	0x8	0x40	Offset/size?
0x10	0x4	0x0
0x14	0x4	0x0
0x18	0x8	0x1000	'Content' Data Size?
0x20	0x8	0x1
0x28	0x8	0x1
0x30	0x10	0x0

'content' overview

Address	Length	Value	Description
0x0	0x1000	-	'content'

Known Retail syscon update packages

These are in full Retail/CEX and Debug/DEX firmwares:

Board	Syscon Hardware	sys_con_firmware package	1.00-1.30	1.30-1.80	1.81-2.80	3.00-3.30	3.40	3.41-4.75	SoftID or Syscon Revision	Notes
COK-001	CXR713120-201GB	SYS_CON_FIRMWARE_01000004.pkg	No	Yes	No	No	No	No	0B8E	Superseded by SYS_CON_FIRMWARE_01000005.pkg
		SYS_CON_FIRMWARE_01000005.pkg	No	No	Yes	Yes	No	No	0B8E	Superseded by SYS_CON_FIRMWARE_01000006.pkg
		SYS_CON_FIRMWARE_01000006.pkg	No	No	No	No	Yes	Yes	0B8E
COK-002	CXR713120-201GB CXR713120-202GB	SYS_CON_FIRMWARE_01010302.pkg	No	No	Yes	Yes	No	No	0C16	Superseded by SYS_CON_FIRMWARE_01010303.pkg
COK-002	CXR713120-201GB CXR713120-202GB	SYS_CON_FIRMWARE_01010303.pkg	No	No	No	No	Yes	Yes	0C16
SEM-001	CXR713120-201GB CXR713120-202GB CXR713120-203GB	SYS_CON_FIRMWARE_01020302.pkg	No	No	No	No	Yes	Yes	0D52
DIA-001	CXR714120-301GB	SYS_CON_FIRMWARE_01030302.pkg	No	No	No	No	Yes	Yes	0DBF
DIA-002 / DEB-001	CXR714120-301GB CXR714120-302GB	SYS_CON_FIRMWARE_01040402.pkg	No	No	No	No	Yes	Yes	0E69
???	???	SYS_CON_FIRMWARE_01050002.pkg	No	No	No	No	Yes	Yes	0F29	CXR714120-X0XGB / SW-30x Prototype
???	???	SYS_CON_FIRMWARE_01050101.pkg	No	No	No	No	No	Yes	0F38	CXR714120-X0XGB / SW-30x Prototype
VER-001	SW-30x		No	No	No	No	No	No	065D
DYN-001	SW2-30x	SYS_CON_FIRMWARE_S1_00010002083E0832.pkg	No	No	No	Yes	Yes	Yes	0832	ps3 2k series
SUR-001			No	No	No	No	No	No	08A0	ps3 2k series
JTP-001 JSD-001			No	No	No	No	No	No	08C2	ps3 2k5 series
KTE-001			No	No	No	No	No	No	0918	ps3 3k series
MSX-001 MPX-001	SW3-30x		No	No	No	No	No	No	098F	ps3 4k series

This means from syscon perspective notible firmware changes where made at 1.30, 1.81, 3.00, 3.40 and 3.41 that affected retail and debug PS3 models

Firmware 1.30 (December 6, 2006) added Backup/Restore
Firmware 1.81 (June 15, 2007) ?
Firmware 3.00 (September 1, 2009) resulted in Class action suit for BluRay reading problems
Firmware 3.40 (June 29, 2010) ?
Firmware 3.41 (July 26, 2010) ?

NonRetail syscon

Remember, Debug/DEX consoles are normal retail consoles with different TargetID, so only those that have a nonretail board have deviating patches (like the CXR713F120A found on the DECR-1000A TOOL/DECR).

Tool/DECR don't have patches, they flash entire firmwares.

Factory cp comes with 0.8.8 (corresponds to syscon fw size 0x60000)
it is VERY likely that it is not possible to go below this point, so any smaller size would likely cause a brick (see Talk:Communication_Processor for more info on how to downgrade)

DECR samples: [1] mirror:
v0.6.1c8_TMU510_u.bin  | CRC16:FAE0 | CRC32:590D9A21 | SHA1:DC8AEA0DDC6C5B813FE9861C972AAE111DA6FCAB | MD5:50794942BD9FAB7CC04A81BD8D220BA1 | 7379733103B15C07EC051E9B44D90BDF 07AD575D86B3937CFA8B3D331BE958DDB40EDFBE
v0.6.10c4_TMU510_u.bin | CRC16:B58A | CRC32:DB8A00BF | SHA1:5D52289960151E2543EBEAA805963B7B88C35DD8 | MD5:14C288A576690C587E95C8542EDC2A70 | 7379733160AF70F9CF5DF54F30D5C77C 5F360CD146EEC3A7B5026151C396C4A5F7F1EC91
v0.6.11c4_TMU510_u.bin | CRC16:8A51 | CRC32:289B15F3 | SHA1:D45214E907A104BCC6BC91D78B7B471263AB0699 | MD5:B7CFA6536329F0DFF1AAD7905627F15F | 73797331F283602B666562012850612E 3FABA6E4FE1D70724164A23886199F36A02EDB0D
v0.6.12c5_TMU510_u.bin | CRC16:31B2 | CRC32:1A1F141B | SHA1:403BF55314C4E785ED90D03A8F2E90B67CC235EA | MD5:1B19B55924445E4BBB2D970410AD6366 | 737973316E5C037615E4727464B2D929 2D2EB7DADEF6B24C4E959235E5B11917D352F9D5
v0.6.14c4_TMU510_u.bin | CRC16:FB1B | CRC32:079EF389 | SHA1:6EF7067FAD939D0B0DFC0B9418A6F4C7509104E5 | MD5:11E9F6270A5D79D0B76614B1C6FE622B | 73797331DCEAC9FA0F1B2449F332C4A9 1CBFF6FE43BDCA3B0A5AAFCE9A98D7176D951A49
v0.8.4c8_TMU510_u.bin  | CRC16:2949 | CRC32:81EFA508 | SHA1:5963B333361123782848E3639D9FA585A728691A | MD5:564D5479F5B98E244C1EA7B56BACC873 | 73797331E8A9ADD15036B33AB8E8AB17 FDCC981DA58B9F44E9331C9708C01D924D78DB3E
v0.9.9c1_TMU510_u.bin  | CRC16:172A | CRC32:EBB2D78A | SHA1:D5E693D2E22FD99CF3E330AC442CD9B07D01DB66 | MD5:216B258115F25B13C9969AF35BFCAC20 | 7379733116E6DD5F054442FACFA15A5C 5E62E8FC8059F864A91CAD142BC30BDAE77D9464
v0.9.14c1_TMU510_u.bin | CRC16:2A2C | CRC32:330CB685 | SHA1:30B19BB8B78E60D81848E8FDF6C4A79537CFBE66 | MD5:7AA5BFE64D15F8BD61EB80B999FE4343 | 73797331807BAF3D6E1B6A3CA5FDF30D 7CCE3B0E739A19C9C431D4D8C59CF1513DAF25E9
v1.0.1c1_TMU510_u.bin  | CRC16:3FD1 | CRC32:A7C7E313 | SHA1:F0DCA7130074E023FFAF58EBD06A61EE73C94907 | MD5:C95C57DC20D9AC5473C1EC914744352F | 73797331F362AE579EA3D864E27334CC 3EAB05DEC5328E885EED3295954999BD518ABFDF
v1.0.3c1_TMU510_u.bin  | CRC16:636E | CRC32:32942DFD | SHA1:83BE56F92A93B911D2BBE12DD1F6AF9CCD1EC11B | MD5:642C0E6615AACBF180C367F7927D1E30 | 737973312D08051E9F5AA1AAF2647EC0 44EE5DF74D92DDB81B1099430B0B5A243FFDA44E
v1.0.4c1_TMU510_u.bin  | CRC16:528F | CRC32:A0FBA694 | SHA1:1A5E5F97D66A754C2C7436618DC911C1C57B9FEA | MD5:6641B03FC6193E35380D681152226275 | 73797331E40325B060CDE461D250058D 8AF478F0A1C1B4B9DECA01C8770F8A9010F0A513
v1.0.5c1_TMU510_u.bin  | CRC16:59F8 | CRC32:87316EBF | SHA1:8ED74829973F740C1B825FD976F7926A95ACBE8B | MD5:717DC4187A6E446C30DACAC129090656 | 737973316856FC96CA6FA4D4652D4985 F9E998439D4C23DA9C1BA8F5C44611D826DA1CFE

dev/hda

dev_hda.image from DECR-1000A CP: dev_hda.image dev_hda.image.7z

Partitions

device file	size	type
/dev/loop0p1	51 MB (50577408 bytes)	0x89
/dev/loop0p2	8,7 MB (8650752 bytes)	Linux
/dev/loop0p3	32 MB (31981568 bytes)	Linux
/dev/loop0p4	35 MB (35127296 bytes)	Extended
/dev/loop0	4,9 MB (4883968 bytes)	Unassigned

Deviating from Retail

Please note that without info about the SKU the listing of ID's is pretty useless

sys_con_firmware package	1.00-1.30	1.30-1.80	1.81-2.80	3.00-3.30	3.40	3.41-4.11	SoftID	Notes
?	No	No	No	No	No	No	0B67	Debug/DEX

Usage

The firmware PUP's contains a collection of patches for all the different hardware revisions of syscon's chips used in different motherboard models.

The ps3swu.self (system updater) decides which applicable Syscon Hardware is present and installs the needed package update(s) accordingly (via updater manager ss service).

Which syscon version and which patches are installed can be seen in More_System_Information

Decryption

Packages can be decrypted with the unpkg tool. Decrypted content of the updates appears to always be 0x1000 bytes (4KB).

Patch/Firmware Body Decryption/Hashing

The following is all theoretical and is intended to discard possibilities about modes of operation used by aes when decrypting body of firmware/patch

We know that:

Two key expansions are used before applying crypto on body (one probably for hashing. the other for decrypting with cbc)
Encrypt is used when applying crypto on body TopHalf (forward ttables) and Decrypt is used when applying on body Bottomhalf (inverse ttables)
Authenticated regions uses a form of what seems to be some ECB with tweak xoring (as graf once said about XTS)
XTS was introduced in 2007 and SysCon from ps3 exists for far more time than that (2003)
XEX is a close relative of XTS that was introduced in 1984
PS4 uses XTS for Authenticated Regions or SNVS (with sector size of 0x20 being used. is this even considered safe?)
4 regions can be controlled for DPA and they are: 0x2790 (size 0x20) (FFs), patch header (most notably at offset 0x4 of header size 0x10 and 0x30 size 0x10), patch body tophalf(+0x40) and patch body bottomhalf(+0x50)
here are the DPA bytes for each of the controlable sections:
21 06 23 DC A2 98 99 4D XX 87 F8 40 FC 48 1C BF (section 2/FF's from 0x2790 on DIA-001) -> 210623DCA298994DFE87F840FC481CBF
21 06 23 DC A2 98 99 4D XX 87 F8 40 FC 48 1C BF (section 2/FF's from 0x2790 on DEB-001) -> 210623DCA298994DFE87F840FC481CBF
16 32 47 79 C3 2C 47 D3 2B 39 CA B5 83 41 0E D5 (section 3/header from DIA-001 patch content)
XX XX XX XX 7B FC 27 CD D5 9A 05 09 3A DF E4 75 (section 3/header AA from DEB-001 patch content) -> 6E9CE7C57BFC27CDD59A05093ADFE475
92 4A 87 88 20 59 6C 49 9F 0E 7D 77 2F 38 4C FC (section 3/header DD from DEB-001 patch content)
7D C6 3B 3B 69 DF 67 4C 94 D7 D4 A8 E0 F8 5B B2 (section 4/body from DIA-001 patch content/tophalf/forward)
73 XX F0 3D XX 9A F0 92 4D XX 62 DA XX 48 3C DB (section 4/body from DIA-001 patch content/bottomhalf/inverse)
49 1F 7B 0A 48 BD 79 33 4E 16 89 F6 B0 25 86 48 (section 4/body from DEB-001 patch content/tophalf/forward)
14 4D F1 D3 21 B6 17 46 60 81 42 E5 02 C9 07 66 (section 4/body from DEB-001 patch content/bottomhalf/inverse/PROPER) -> 6B3583DA1AA6B49106E1641178EE68C8 (inverse ttables)
some bytes are considered "weak" bytes and should be bruteforced in the eventuality these keys fail
another possibility is that both the header and the body are hashed and then decrypted, using for example, cmac and cbc
since key expansions take 10 "hills" in the analysis, it should be safe to assume that AES-128 is used(because it uses 10 rounds).
6554cff202c3bfdd9740901070b705bf : correct md5 for patch content we are trying keys on (DIA-001)
4875ad06a1499cc516a0d4d92e595794 : correct md5 for patch content we are trying keys on (DEB-001/DIA-002)
trying a different header/body patch content from another similar board will result into failure of decrypting body, which means that the header is checked for authenticity and that the header hash is NOT in the header
altering the patch header doesn't cause the patch header dpa bytes to change (a test was done with 4 bytes and the result was 16 32 47 79, which matches the other patch dpa recovered bytes)
there are in fact not 4 but 5 aes sections. the last one seems to be body related, as changing the body even one bit makes the last aes section disappear.
section 2 is divided into two sections, corresponding to TopHalf and BottomHalf of patch area.
TopHalf uses forward ttables/sbox. BottomHalf uses inverse ttables/sbox
TopHalf is ONLY the very first 0x10 bytes AFTER the header and into the body (corresponding to 0x40 in header size 0x10)
BottomHalf is the rest of the body itself.
DYN-001 processes one entire chunk of 0x1000 bytes, 0x40 for header and 0xFC0 for body, and not two of 0x400 and 0xC00 like the Sony models
504 aes operations are done for the body (252/0xFC for cmac and 252/0xFC for cbc). it is unknown if cmac comes first or it is cbc.
All attacks show weak bytes in comparisson with CXR(F), likely due to CXR being optimized for the attack (removed resistors/capacitors, etc)

Header

The header format is partially unknown at this stage. All the Firmwares patches are written in little endian.

Offset	Length	Notes	Related DECR Error	Notes
0x0	0x4	Magic	FFFFFED2 (Magic Error)
0x4	0x10	Header CMAC1	FFFFFED1 (Header Check Error)	CMAC of Partial Header (0x10,0x30 size) with header first 4 bytes instead of random 4 bytes and where Header CMAC2 is zeroed Concatenated with Encrypted Body
0x14	0x10	Header CMAC2	FFFFFED1 (Header Check Error)	CMAC of Header (where this cmac has been zeroed)
0x24	0x4	Padding	FFFFFED1 (Header Check Error)
0x28	0x4	Total size	FFFFFED1 (Header Check Error)
0x2c	0x4	Size of binary	FFFFFED1 (Header Check Error)
0x30	0x10	IV for AES-128 CBC	FFFFFED1 (Header Check Error)
0x40	0xfc0	Encrypted binary	FFFFFED0 (Data Check Error) / FFFFFECF (Data Size Check Error)

Note: For the weird bogus update ONLY: FFFFFF37 (Alignment Error?) (Trying any data size between 0x41 and 0x4C bytes)
Note2: v0.6.14c4 is the bogus update (only update with a weird header)
Note3: setting data between 0x40 to 0x4C to zero in bogus update yields error FFFFFED0

Samples

00000000  1B 2D 70 0F AB 5E B3 99 68 20 FE 3D E1 80 6A 1D  .-p.«^³™h þ=á€j.
00000010  B8 FD 37 CF CD 45 85 AB 51 F7 05 E3 EA 32 A5 EA  ¸ý7ÏÍE…«Q÷.ãê2¥ê
00000020  67 45 F9 48 00 00 00 00 00 10 00 00 C0 0F 00 00  gEùH........À...
00000030  8B 04 07 F9 9B A2 90 3A 75 89 F1 42 12 59 DA 0D  ‹..ù›¢.:u‰ñB.YÚ.
00000040  21 7C A2 C3 5A E4 78 00 10 8D 4B F7 A2 73 9C 63  !|¢ÃZäx...K÷¢sœc
00000050  5D 8D 5D 49 16 C7 6F 2C AD 33 FE 1F D3 6C A1 CA  ].]I.Ço,.3þ.Ól¡Ê
00000060  BA AD 2B FE 8F 33 71 D7 C5 E6 5C FF BF 77 6C 80  º.+þ.3q×Åæ\ÿ¿wl€
00000070  F2 BE 11 BB 3C 52 52 DC A9 68 E5 24 AD 4F F3 48  ò¾.»<RRÜ©hå$.OóH

-From v1.0.4c2_TMU510_u-

00000000   73 79 73 31 73 47 59 5D  FB 85 3B 7B 4A 28 10 5D   sys1sGY]û…;{J( ]
00000010   46 EE 8C 01 3C B4 F1 82  1E 18 4F B7 4A 56 FC C7   FîŒ <´ñ‚  O·JVüÇ
00000020   FF 83 0B E0 00 00 00 00  40 00 06 00 00 00 06 00   ÿƒ à    @       
00000030   69 B6 02 69 3A 97 8B 1C  4E 18 D4 E0 63 7D CA 94   i¶ i:—‹ N Ôàc}Ê”
00000040   4B A0 79 34 79 41 BD 09  BB 68 D4 0A A0 B7 05 78   K y4yA½ »hÔ  · x
00000050   D9 8F 8F 28 6C 9A 1B 61  CF A1 E7 49 7D CA C4 A3   Ù  (lš aÏ¡çI}ÊÄ£
00000060   A4 4D 4B E0 AE 48 86 03  B1 43 F2 47 C0 C4 1D 4F   ¤MKà®H† ±CòGÀÄ O
00000070   FA E8 43 A7 1E 6E 79 8C  E5 FF 04 20 E9 44 09 B5   úèC§ nyŒåÿ  éD µ

Observations

The first 4 bytes (0x1B2D700F) appear static in each package.
The next 0x20 bytes appear to change with each package
The following 12 bytes (0x0000000000100000C00F0000) also appear static, but it's the firmware size and fw size - header size; infact if correctly converted to little endian 00000000 00001000 00000fc0, where 00000000 is Unknown, 00001000 is 4096 in dec (file size) and 00000fc0 is 4032 in dec (update size).
On the DECH fw, the update works in the same way: 000000004000060000000600 converted will be: 00000000 00060040 00060000, where, 00000000 is probably padding, file size 00060040, 00060000 update size
the first 0x40 bytes probably are IV + HASH + update infos. probably the algorithm used is AES.
algorithm used is aes 128 cbc on the body (iv is at + 0x30)

Access to Syscon from Linux

Access SysCon ROM without needing ps3dm-utils: http://wiki.gitbrew.org/wikibrew/PS3:HvReverseEngineering#SYSCON

List of Soft IDs in Decimal Form

Placeholder for bga patch key generation

34 3A 00 00 00 00 5F 5F 53 43 45 49 53 59 53 31

4:....__SCEISYS1

OR (slim DYN-001)

00 00 00 00 5F 5F 5F 5F 53 43 45 49 53 59 53 31

....____SCEISYS1

replace 4 dots with soft id in decimal form, xor with 0x140 key and with cipher patcher key and encrypt with master patcher key to obtain cipher master key for that soft id

replace 4 dots with soft id in decimal form, xor with 0x140 key and with hasher patcher key and encrypt with master patcher key to obtain hasher master key for that soft id

PTCH Firmware TOC

Offset	Size	Notes	Number
0x00	0x2	Major Version	1
0x02	0x2	Minor Version	1
0x04	0x2	Major Revision	1
0x06	0x2	Minor Revision	1
0x08	0x10	PTCH Addresses	4*4
0x18	0x4	PTCH #1 Instruction / Data	1
0x1C	0x4	PTCH #2 Instruction / Data	1
0x20	0x4	PTCH #3 Instruction / Data	1
0x24	0x4	PTCH #4 Instruction / Data	1
0x28	0x10	Additional PTCH Instruction Addresses	4*4
0x38	0x388	Additional PTCH Instructions	1
0x3C0	0xC00	HDMI Related PTCH Instructions	1

External commands (COK-001)

Address	Command	Subcommand	Permission
0x32959	BOOT	MODE	0x000080D6
0x329D5	BOOT	CONT	0x000080D5
0x342D7	SHUTDOWN	-	0x0000C0D5
0x32A51	HALT	-	0x0000C0D5
0x32A85	BOOTENABLE	-	0x0000809A
0x33491	AUTH1	-	0x0000C0EF
0x33525	AUTH2	-	0x0000C0EF
0x33619	AUTHVER	SET	0x0000C0DF
0x335BF	AUTHVER	GET	0x0000C0FF
0x32AC3	EEP	INIT	0x000080DA
0x32C51	EEP	SET	0x0000C0DF
0x32D3D	EEP	GET	0x0000C0DF
0x32EA7	PDAREA	SET	0x0000C0DF
0x32E3B	PDAREA	GET	0x0000C0DF
0x330C5	CSAREA	SET	0x0000C0DF
0x33057	CSAREA	GET	0x0000C0DF
0x33169	VID	GET	0x0000C0D5
0x331D7	CID	GET	0x0000C0D5
0x3321D	ECID	GET	0x0000C0D5
0x3325D	REV	SB	0x0000C0D5
0x3328D	SPU	INFO	0x0000C0D5
0x332E1	KSV	-	0x0000C0D5
0x33685	FAN	SETPOLICY	0x0000C0D7
0x33717	FAN	GETPOLICY	0x0000C0D7
0x33781	FAN	START	0x0000C0D7
0x33781	FAN	STOP	0x0000C0D7
0x33951	FAN	SETDUTY	0x0000C0D7
0x339C3	FAN	GETDUTY	0x0000C0D7
0x33A27	R8	-	0x0000C0DF
0x33AD1	W8	-	0x0000C0DF
0x33B71	R16	-	0x0000C0DF
0x33C19	W16	-	0x0000C0DF
0x33CBB	R32	-	0x0000C0DF
0x33E49	W32	-	0x0000C0DF
0x33EE9	RBE	-	0x0000C0D5
0x33F91	WBE	-	0x0000C0D5
0x34049	PORTSTAT	-	0x0000C0DF
0x332BF	VER	-	0x0000C0FF
0x341C5	BUZ	-	0x00008096
0x342D7	SERVFAN	-	0x0000C0D7
0x341F9	ERRLOG	START	0x0000C0DF
0x34221	ERRLOG	STOP	0x0000C0DF
0x34249	ERRLOG	GET	0x0000C0FF
0x342B3	ERRLOG	CLEAR	0x0000C0DF

Internal commands

Command	Address	Perms	SubCommands	Description
becount	0xCA7D	0xDD0C0000	-	Display bringup/shutdown count + Power-on time
bepgoff	0xA4E7	0xD00C0000	-	BE power grid off
bepkt	0x2435D	0xDC0C0000	show/set/unset/mode/debug/help	Packet permissions
bestat	0xD413	0xFD0F0000	-	Get status of BE
boardconfig	0x99C7	0xDC0C0000	-	Displays board configuration (NOT WORKING?)
bootbeep	0x1EA67	0xF0000000	stat/on/off	Boot beep
bringup	0xD597	0xFD0F0000	-	Turn PS3 on
bsn	0xD805	0xF00F0000	-	Get board serial number
bstatus	0x24269	0xDD0C0000	-	HDMI related status
buzz	0xA4FF	0xDC0C0000	[freq]	Activate buzzer
buzzpattern	0xA8B7	0xDC0C0000	[freq] [pattern] [count]	Buzzer pattern
clear_err	0x2595B	0xDD0C0000	last/eeprom/all	Clear errors
clearerrlog	0xB8CB	0xDD0C0000	-	Clears error log
comm	0x9919	0xDC0C0000	-	Communication mode
commt	0x24907	0xDC0C0000	help/start/stop/send	Manual BE communication
cp	0x1E077	0xF0000000	ready/busy/reset/beepremote/beep2kn1n3/beep2kn2n3	CP control commands
csum	0xD687	0xFF0F0000	-	Firmware checksum
devpm	0xD053	0xDD0C0000	ata/pci/pciex/rsx	Device power management
diag	0x9AAD	0xD00C0000	...	Diag (execute without param to show help) (NOT WORKING?)
disp_err	0x25911	0xDD0C0000	-	Displays errors
duty	0x9B23	0xDD0C0000	get/set/getmin/setmin/getmax/setmax/getinmin/setinmin/getinmax/setinmax	Fan policy
dve	0x2995D	0xDC0C0000	help/set/save/show	DVE chip parameters
eepcsum	0xAA65	0xDD0C0000	-	Does nothing
eepromcheck	0x9A1D	0x000C0000	[id]	Check eeprom
eeprominit	0x9A65	0x000C0000	[id]	Init eeprom
ejectsw	0xD611	0xFD0F0000	-	Eject switch
errlog	0xB7ED	0xFF0C0000	-	Gets the error log
fancon	0xD26D	0x0D000000	-	Does nothing
fanconautotype	0xC075	0xDD0C0000	-	Does nothing
fanconmode	0xBF35	0xDD0C0000	get	Fan control mode
fanconpolicy	0xBBC9	0xDD0C0000	get/set/getini/setini	Fan control policy
fandiag	0x1E91B	0xF0000000	-	Fan test
faninictrl	0xD3D9	0x0D000000	-	Does nothing
fanpol	0xCA31	0xDD0C0000	-	Does nothing
fanservo	0xBF29	0xDD0C0000	-	Does nothing
fantbl	0xC087	0xDD0C0000	get/set/getini/setini/gettable/settable	Fan table
firmud	0xD61D	0xFDFF0000	-	Firmware update
geterrlog	0xB84F	0xDD0C0000	[id]	Gets error log
getrtc	0xA6F3	0xDD0C0000	-	Gets rtc
halt	0x1E107	0xF0000000	-	Halts syscon
hdmi	0x29F39	0xDD0C0000	...	HDMI (various commands, use help)
hdmiid	0x29D1D	0xDC0F0000	-	Get HDMI id's
hdmiid2	0x29D81	0xDC0F0000	-	Get HDMI id's
hversion	0x2422F	0xDD0C0000	-	Platform ID
hyst	0xAEF5	0xDD0C0000	get/set/getini/setini	Temperature zones
lasterrlog	0xB7FF	0xDD0C0000	-	Last error from log
ledmode	0xA80B	0xDC0C0000	[id] [id]	Get led mode
LS	0x2421B	0xDD0C0000	-	LabStation Mode
ltstest	0xCB97	0xDD0C0000	get/set be/rsx	?Temp related? values
osbo	0x1EA3F	0xF0000000	-	Sets 0x2000F60
patchcsum	0xD9F7	0xDD0C0000	-	Patch checksum
patchvereep	0xD9B1	0xDD0C0000	-	Patch version eeprom
patchverram	0xD965	0xDD0C0000	-	Patch version ram
poll	0x240E3	0xDD0C0000	-	Poll log
portscan	0xDA0D	0xDD0C0000	[port]	Scan port (NOT WORKING?)
powbtnmode	0xB911	0xDC0C0000	[mode (0/1)]	Power button mode
powerstate	0xCE6F	0xDD0C0000	-	Get power state
powersw	0xD5F9	0xFD0F0000	-	Power switch
powupcause	0xB621	0xDD0C0000	-	Power up cause
printmode	0x99D9	0xDC0C0000	[mode (0/1/2/3)]	Set printmode
printpatch	0xD94F	0xDD0C0000	-	Prints patch
r	0x8CA5	0xDD0C0000	[offset] [length]	Read byte from SC
r16	0x8ED5	0xDD0C0000	[offset] [length]	Read word from SC
r32	0x9191	0xDD0C0000	[offset] [length]	Read dword from SC
r64	0x935D	0xDD0C0000	[offset] [length]	Read qword from SC
r64d	0x948F	0xDD0C0000	[offset] [length]	Read ?qword data? from SC
rbe	0x96F9	0xDD0C0000	[offset]	Read from BE
recv	0x24135	0xDD0C0000	-	Receive something
resetsw	0xD605	0xFC0F0000	-	Reset switch
restartlogerrtoeep	0xB903	0xDD0C0000	-	Reenable error logging to eeprom
revision	0xD7E1	0xFFFF0000	-	Get softid
rrsxc	0xD313	0xDD0C0000	[offset] [length]	Read from RSX
rtcreset	0xA7BB	0x000C0000	-	Reset RTC
scagv2	0xE24F	0xFF000000	-	Auth related?
scasv2	0xE207	0xDD000000	-	Auth related?
scclose	0xE1EF	0xFF000000	-	Auth related?
scopen	0xE121	0xFF000000	-	Auth related?
send	0x2416F	0xDD0C0000	[variable]	Send something
shutdown	0xD5C5	0xFD0F0000	-	PS3 shutdown
startlogerrtsk	0xB8E7	0xDD0C0000	-	Start error log task
stoplogerrtoeep	0xB8F5	0xDD0C0000	-	Stop error logging to eeprom
stoplogerrtsk	0xB8D9	0xDD0C0000	-	Stop error log task
syspowdown	0xB6E9	0xDD0C0000	3 params	System power down
task	0x15005	0xDD0C0000	-	Print tasks
thalttest	0xD813	0x000F0000	-	Does nothing
thermfatalmode	0xCA3B	0xDD0C0000	canboot/cannotboot	Set thermal boot mode
therrclr	0xD3E5	0xDD0C0000	-	Thermal register clear
thrm	0xBF1D	0xDD0C0000	-	Does nothing
tmp	0xAA69	0xDD0C0000	[zone]	Get temperature
trace	0xB951	0xDD0C0000	...	Trace tasks (use help)
trp	0xAB2F	0xDD0C0000	get/set/getini/setini	Temperature zones
tsensor	0xA279	0xDD0C0000	[sensor]	Get raw temperature
tshutdown	0xB2A1	0xDD0C0000	get/set/getini/setini	Thermal shutdown
tshutdowntime	0xC95D	0xDD0C0000	[time]	Thermal shutdown time
tzone	0xB5E1	0xDD0C0000	-	Show thermal zones
version	0xD65F	0xFFFF0000	-	SC firmware version
w	0x8BF9	0xDD0C0000	[offset] [value]	Write byte to SC
w16	0x8E2D	0xDD0C0000	[offset] [value]	Write word to SC
w32	0x8FED	0xDD0C0000	[offset] [value]	Write dword to SC
w64	0x92A9	0xDD0C0000	[offset] [value]	Write qword to SC
wbe	0x9665	0xDD0C0000	[offset] [value]	Write to BE
wmmto	0xCB3B	0xDC0C0000	get	Get watch dog timeout
wrsxc	0xD279	0xDD0C0000	[offset] [value]	Write to RSX
xdrdiag	0x1E711	0xF0000000	start/info/result	XDR diag
xiodiag	0x1E875	0xF0000000	-	XIO diag
xrcv	0x25313	0xDC0C0000	-	Xmodem receive

SW-301 Command List

A_AUTH = 0x0700
B_AUTH = 0x0B00
INT = 0x0300
ANY = 0x0F00

Address	Command	Permission
0x32030	hdmi	A_AUTH
0x2FB30	tsensor	A_AUTH
0x2FE7F	tmp	A_AUTH
0x2FFA6	trp	A_AUTH
0x301D8	tshutdown	A_AUTH
0x3041B	tzone	A_AUTH
0x30482	thrm	A_AUTH
0x307EF	duty	A_AUTH
0x30C0D	fanconpolicy	A_AUTH
0x30DF9	fanconmode	A_AUTH
0x30F3B	fantbl	A_AUTH
0x305F2	hyst	A_AUTH
0x313EB	powupcause	A_AUTH
0x31460	syspowdown	A_AUTH
0x316C6	devpm	A_AUTH
0x318CF	powerstate	A_AUTH
0x31AC2	nonfatalerror	A_AUTH
0x2F82A	getrtc	INT
0x2ED2B	help	A_AUTH
0x2EED7	meminfo	INT
0x2EF63	rbe	INT
0x2F1FC	DISABLEALLERASE	A_AUTH
0x2F281	task	INT
0x2F460	cleareep	INT
0x2F499	commt	INT
0x2F79B	bestat	A_AUTH
0x2DAC3	bringup	A_AUTH
0x2DC1C	shutdown	A_AUTH
0x2DC9B	r	A_AUTH
0x2DC9B	r16	A_AUTH
0x2DC9B	r32	A_AUTH
0x2E7BC	r64	A_AUTH
0x2E7BC	r64d	A_AUTH
0x2E03B	w	A_AUTH
0x2E03B	w16	A_AUTH
0x2E03B	w32	A_AUTH
0x2E6C1	w64	A_AUTH
0x2E6C1	wbe	A_AUTH
0x2DAC3	BOOT	A_AUTH
0x2DC1C	HALT	A_AUTH
0x2DC7B	BOOTENABLE	A_AUTH
0x2DC9B	R8	A_AUTH
0x2DC9B	R16	A_AUTH
0x2DC9B	R32	A_AUTH
0x2E03B	W8	A_AUTH
0x2E03B	W16	A_AUTH
0x2E03B	W32	A_AUTH
0x2E8C2	EEP	A_AUTH
0x2E9B8	PDAREA	A_AUTH
0x2E9B8	CSAREA	A_AUTH
0x2EC36	portset	INT
0x2ECF9	extend	A_AUTH
0x80D0	version	ANY
0x812B	revision	ANY
0x8251	setcmdlong	ANY
0x81C3	VER	ANY
0x8251	SETCMDLONG	ANY
0x8356	csum	A_AUTH
0x8555	AUTH1	B_AUTH
0x8555	AUTH2	B_AUTH
0x86FB	AUTHVER	ANY
0x311DA	ERRLOG	ANY
0x311DA	errlog	ANY
0x31C87	powersw	A_AUTH
0x31CA5	ejectsw	A_AUTH
0x31CC5	buzzduty	INT
0x31D24	buzz	INT
0x33F98	VID	A_AUTH
0x340BF	CID	A_AUTH
0x340BF	ECID	A_AUTH
0x34211	SPU	A_AUTH
0x342BC	REV	A_AUTH
0x34363	KSV	A_AUTH
0x3441B	portscan	A_AUTH
0x33F46	eepcsum	A_AUTH
0x346DD	patchinfo	A_AUTH
0x346F3	poll	INT
0x3470F	recv	INT
0x3472B	send	INT
0x34747	LS	INT
0x34763	hversion	INT

SW2-301 Command List

A_AUTH = 0x0700
B_AUTH = 0x0B00
INT = 0x0300
ANY = 0x0F00

Address	Command	Permission
0x3D989	hdmi	A_AUTH
0x3B1CF	tsensor	A_AUTH
0x3B3D5	tmp	A_AUTH
0x3B627	trp	A_AUTH
0x3B645	tshutdown	A_AUTH
0x3B663	tzone	A_AUTH
0x3B6C9	thrm	A_AUTH
0x3B95D	duty	A_AUTH
0x3BBB9	fanconpolicy	A_AUTH
0x3BD48	fanconmode	A_AUTH
0x3BE58	fantbl	A_AUTH
0x3C07D	fanservo	A_AUTH
0x3C2E2	fanservostat	A_AUTH
0x3B7F0	hyst	A_AUTH
0x3C695	powupcause	A_AUTH
0x3C70A	syspowdown	A_AUTH
0x3C98A	devpm	A_AUTH
0x3CB93	powerstate	A_AUTH
0x3CDF0	nonfatalerror	A_AUTH
0x3AD68	getrtc	INT
0x3A280	help	A_AUTH
0x3A42C	meminfo	INT
0x3A4B8	rbe	INT
0x3A751	DISABLEALLERASE	A_AUTH
0x3A7D6	task	INT
0x3A99E	cleareep	INT
0x3A9D7	commt	INT
0x3ACD9	bestat	A_AUTH
0x39018	bringup	A_AUTH
0x39171	shutdown	A_AUTH
0x391F0	r	A_AUTH
0x391F0	r16	A_AUTH
0x391F0	r32	A_AUTH
0x39D11	r64	A_AUTH
0x39D11	r64d	A_AUTH
0x39590	w	A_AUTH
0x39590	w16	A_AUTH
0x39590	w32	A_AUTH
0x39C16	w64	A_AUTH
0x39C16	wbe	A_AUTH
0x39018	BOOT	A_AUTH
0x39171	HALT	A_AUTH
0x391D0	BOOTENABLE	A_AUTH
0x391F0	R8	A_AUTH
0x391F0	R16	A_AUTH
0x391F0	R32	A_AUTH
0x39590	W8	A_AUTH
0x39590	W16	A_AUTH
0x39590	W32	A_AUTH
0x39E17	EEP	A_AUTH
0x39F0D	PDAREA	A_AUTH
0x39F0D	CSAREA	A_AUTH
0x3A18B	portset	INT
0x3A24E	extend	A_AUTH
0xA0F1	version	ANY
0xA14C	revision	ANY
0xA272	setcmdlong	ANY
0xA1E4	VER	ANY
0xA272	SETCMDLONG	ANY
0xA37B	csum	A_AUTH
0xA5AF	AUTH1	B_AUTH
0xA5AF	AUTH2	B_AUTH
0xA755	AUTHVER	ANY
0x3C484	ERRLOG	ANY
0x3C484	errlog	ANY
0x3D005	powersw	A_AUTH
0x3D023	ejectsw	A_AUTH
0x3D043	buzzduty	INT
0x3D0A2	buzz	INT
0x3FC43	VID	A_AUTH
0x3FD6A	CID	A_AUTH
0x3FD6A	ECID	A_AUTH
0x3FEBC	SPU	A_AUTH
0x3FF67	REV	A_AUTH
0x4000E	KSV	A_AUTH
0x400C6	portscan	A_AUTH
0x3FBF1	eepcsum	A_AUTH
0x40388	patchinfo	A_AUTH
0x4039E	poll	INT
0x403BA	recv	INT
0x403D6	send	INT
0x403F2	LS	INT
0x4040E	hversion	INT

Note: Very similar to ps4 southbridge firmware. Only difference here is the string is Playstation 3

SW3-304 Commandlist

Address	Command	Permission
0x3E21D	hdmi	A_AUTH
0x3B8F0	tsensor	A_AUTH
0x3BAF6	tmp	A_AUTH
0x3BD48	trp	A_AUTH
0x3BD66	tshutdown	A_AUTH
0x3BD84	tzone	A_AUTH
0x3BDEA	thrm	A_AUTH
0x3C07E	duty	A_AUTH
0x3C2DA	fanconpolicy	A_AUTH
0x3C469	fanconmode	A_AUTH
0x3C579	fantbl	A_AUTH
0x3C79E	fanservo	A_AUTH
0x3CA03	fanservostat	A_AUTH
0x3CB6B	fanservosetval	A_AUTH
0x3BF11	hyst	A_AUTH
0x3CE8E	powupcause	A_AUTH
0x3CF03	syspowdown	A_AUTH
0x3D183	devpm	A_AUTH
0x3D38C	powerstate	A_AUTH
0x3D5E9	nonfatalerror	A_AUTH
0x3B489	getrtc	INT
0x3A9A1	help	A_AUTH
0x3AB4D	meminfo	INT
0x3ABD9	rbe	INT
0x3AE72	DISABLEALLERASE	A_AUTH
0x3AEF7	task	INT
0x3B0BF	cleareep	INT
0x3B0F8	commt	INT
0x3B3FA	bestat	A_AUTH
0x39739	bringup	A_AUTH
0x39892	shutdown	A_AUTH
0x39911	r	A_AUTH
0x39911	r16	A_AUTH
0x39911	r32	A_AUTH
0x3A432	r64	A_AUTH
0x3A432	r64d	A_AUTH
0x39CB1	w	A_AUTH
0x39CB1	w16	A_AUTH
0x39CB1	w32	A_AUTH
0x3A337	w64	A_AUTH
0x3A337	wbe	A_AUTH
0x39739	BOOT	A_AUTH
0x39892	HALT	A_AUTH
0x398F1	BOOTENABLE	A_AUTH
0x39911	R8	A_AUTH
0x39911	R16	A_AUTH
0x39911	R32	A_AUTH
0x39CB1	W8	A_AUTH
0x39CB1	W16	A_AUTH
0x39CB1	W32	A_AUTH
0x3A538	EEP	A_AUTH
0x3A62E	PDAREA	A_AUTH
0x3A62E	CSAREA	A_AUTH
0x3A8AC	portset	INT
0x3A96F	extend	A_AUTH
0xA0FF	version	ANY
0xA15A	revision	ANY
0xA280	setcmdlong	ANY
0xA1F2	VER	ANY
0xA280	SETCMDLONG	ANY
0xA389	csum	A_AUTH
0xA5BD	AUTH1	B_AUTH
0xA5BD	AUTH2	B_AUTH
0xA763	AUTHVER	ANY
0x3CC7D	ERRLOG	ANY
0x3CC7D	errlog	ANY
0x3D7FE	powersw	A_AUTH
0x3D81C	ejectsw	A_AUTH
0x3D83C	doorsw	A_AUTH
0x3D8D7	buzzduty	INT
0x3D936	buzz	INT
0x404D8	VID	A_AUTH
0x405FF	CID	A_AUTH
0x405FF	ECID	A_AUTH
0x40751	SPU	A_AUTH
0x407FC	REV	A_AUTH
0x408A3	KSV	A_AUTH
0x4095B	MOUNTINFO	A_AUTH
0x40A2A	portscan	A_AUTH
0x40486	eepcsum	A_AUTH
0x40CF2	patchinfo	A_AUTH
0x40D08	poll	INT
0x40D24	recv	INT
0x40D40	send	INT
0x40D5C	LS	INT
0x40D78	hversion	INT

Syscon Firmware

Contents

Syscon update packages

Package structure

Overview

'info0'

'info1'

'content' overview

Known Retail syscon update packages

NonRetail syscon

dev/hda

Partitions

Deviating from Retail

Usage

Decryption

Patch/Firmware Body Decryption/Hashing

Header

Samples

Observations

Access to Syscon from Linux

List of Soft IDs in Decimal Form

Placeholder for bga patch key generation

PTCH Firmware TOC

External commands (COK-001)

Internal commands

SW-301 Command List

SW2-301 Command List

SW3-304 Commandlist

Navigation menu

Syscon Firmware

Syscon update packages

Package structure

Overview

'info0'

'info1'

'content' overview

Known Retail syscon update packages

NonRetail syscon

dev/hda

Partitions

Deviating from Retail

Usage

Decryption

Patch/Firmware Body Decryption/Hashing

Header

Samples

Observations

Access to Syscon from Linux

List of Soft IDs in Decimal Form

Placeholder for bga patch key generation

PTCH Firmware TOC

External commands (COK-001)

Internal commands

SW-301 Command List

SW2-301 Command List

SW3-304 Commandlist

Navigation menu

Search