Template talk:Syscon pinout LQFP 128 pins
Jump to navigation
Jump to search
Bluray Drive, disc presence detector
There are 2 syscon pins dedicated to detect the disc presence. One of pins powers a IR-LED (emitter), and the other pin is connected to a photo-transistor (receiver), both aligned with each other
When the disc interrupts the light beam a control signal is sent to syscon in the receiver pin. See BL1-001 and BL2-001
Missing lines
- POW_FAIL (syscon input, unknown source)
- SB_RESET (syscon output, to south bridge)
- SB_CGAST (syscon output, to south bridge)
- RSX_INT (syscon input, from RSX)
- RSX_RESET (syscon output, to RSX)
- RSX_CGAST (syscon output, to RSX)
- RSX_FBVDD_SEL (syscon output, to RSX)
- VD_VINT0 (syscon input, from RSX)
- VD_VINT1 (syscon input, from RSX)
- SW_HDD (syscon output, to HDD)